On Friday, November 20, 2015 at 07:41:30 PM, Jan Viktorin wrote:
On Fri, 20 Nov 2015 17:27:02 +0100
Marek Vasut marex@denx.de wrote:
On Friday, November 20, 2015 at 05:21:08 PM, Marek Vasut wrote:
On Friday, November 20, 2015 at 03:49:46 PM, Jan Viktorin wrote:
Hello Marek and U-Boot community,
[snip]
So, what is the status of the SPL for SoCFPGA in upstream? Does anybody test all the claimed socfpga platforms?
I'm testing mostly MCVEVK and SoCkit and ArriaV SoCDK. Dinh, you wanna look at the CV SoCDK issue ? I might be able to set it up later this weekend, but don't hold your breath, I am pretty overloaded.
Update, my SoCdk boots just fine:
U-Boot SPL 2016.01-rc1-00116-g75dfe33 (Nov 20 2015 - 17:24:50) drivers/ddr/altera/sequencer.c: Preparing to start memory calibration drivers/ddr/altera/sequencer.c: CALIBRATION PASSED drivers/ddr/altera/sequencer.c: Calibration complete Trying to boot from MMC
U-Boot 2016.01-rc1-00116-g75dfe33 (Nov 20 2015 - 17:24:50 +0100)
CPU: Altera SoCFPGA Platform FPGA: Altera Cyclone V, SE/A6 or SX/C6 or ST/D6, version 0x0 BOOT: SD/MMC External Transceiver (1.8V)
Watchdog enabledI2C: ready DRAM: 1 GiB MMC: SOCFPGA DWMMC: 0 *** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial Model: Altera SOCFPGA Cyclone V SoC Development Kit Net: No ethernet found. Hit any key to stop autoboot: 0 =>
Best regards, Marek Vasut
Hi, thanks for quick replies.
I tried the SoCDK with 2016-rc1 and the default config socfpga_cyclone5_defconfig. The previous build has used some customization of the config (I tried to disable EMAC). I build by the Buildroot using the uclibc toolchain. Installed as
$ sudo dd if=u-boot-spl-dtb.bin.crc of=/dev/sdc1 bs=64k seek=0 $ sudo dd if=u-boot-dtb.img of=/dev/sdc1 bs=64k seek=4
Do the following, the u-boot-with-spl-dtb.sfp is automatically generated by the build in 2016.01rc, while you need to do make u-boot-with-spl-dtb.sfp with 2015.10. This is actually important:
$ sudo dd if=u-boot-with-spl-dtb.sfp of=/dev/sdc
btw which version of gcc does your toolchain use ? It might be a compiler bug, I've seen those more than once.
Freezed again:
U-Boot SPL 2016.01-rc1 (Nov 20 2015 - 17:49:39) drivers/ddr/altera/sequencer.c: Preparing to start memory calibration drivers/ddr/altera/sequencer.c: CALIBRATION PASSED drivers/ddr/altera/sequencer.c: Calibration complete
U-Boot 2016.01-rc1 (Nov 20 2015 - 17:49:39 +0100)
CPU: Altera SoCFPGA Platform FPGA: Altera Cyclone V, SE/A6 or SX/C6 or ST/D6, version 0x0 BOOT: SD/MMC Internal Transceiver (3.0V) Watchdog enabled I2C: ready DRAM: 1 GiB MMC: SOCFPGA DWMMC: 0 *** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial Model: Altera SOCFPGA Cyclone V SoC Development Kit Net: [...freezed...]
Regards Jan Viktorin
Best regards, Marek Vasut