Move u-boot specific common nodes in the dts files to meson-g12-common-u-boot.dtsi. This allows us to keep the basic dts[i] files up-to-date with the ones in kernel, but at the same time allowing the u-boot to add its own properties to the existing nodes. Also add missing mmc alias to dts nodes to avoid below debug warning.
mmc_bind: alias ret=-2, devnum=-1 mmc_bind: alias ret=-2, devnum=-1
Signed-off-by: Anand Moon linux.amoon@gmail.com --- No changes from previous patch --- arch/arm/dts/meson-g12-common-u-boot.dtsi | 12 ++++++++++++ arch/arm/dts/meson-g12a-sei510.dts | 9 --------- arch/arm/dts/meson-g12a-u200.dts | 9 --------- arch/arm/dts/meson-g12b-odroid-n2.dts | 9 --------- arch/arm/dts/meson-khadas-vim3.dtsi | 9 --------- arch/arm/dts/meson-sm1-sei610.dts | 9 --------- 6 files changed, 12 insertions(+), 45 deletions(-)
diff --git a/arch/arm/dts/meson-g12-common-u-boot.dtsi b/arch/arm/dts/meson-g12-common-u-boot.dtsi index 38fd3d3feb..347b8ded22 100644 --- a/arch/arm/dts/meson-g12-common-u-boot.dtsi +++ b/arch/arm/dts/meson-g12-common-u-boot.dtsi @@ -8,6 +8,18 @@ soc { u-boot,dm-pre-reloc; }; + + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + mmc0 = &sd_emmc_a; + mmc1 = &sd_emmc_b; + mmc2 = &sd_emmc_c; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; };
&canvas { diff --git a/arch/arm/dts/meson-g12a-sei510.dts b/arch/arm/dts/meson-g12a-sei510.dts index c7a8736885..c6a48ebbe5 100644 --- a/arch/arm/dts/meson-g12a-sei510.dts +++ b/arch/arm/dts/meson-g12a-sei510.dts @@ -28,11 +28,6 @@ }; };
- aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - }; - mono_dac: audio-codec-0 { compatible = "maxim,max98357a"; #sound-dai-cells = <0>; @@ -49,10 +44,6 @@ sound-name-prefix = "MIC"; };
- chosen { - stdout-path = "serial0:115200n8"; - }; - cvbs-connector { compatible = "composite-video-connector";
diff --git a/arch/arm/dts/meson-g12a-u200.dts b/arch/arm/dts/meson-g12a-u200.dts index 8551fbd4a4..8be7b6985b 100644 --- a/arch/arm/dts/meson-g12a-u200.dts +++ b/arch/arm/dts/meson-g12a-u200.dts @@ -13,15 +13,6 @@ compatible = "amlogic,u200", "amlogic,g12a"; model = "Amlogic Meson G12A U200 Development Board";
- aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - cvbs-connector { compatible = "composite-video-connector";
diff --git a/arch/arm/dts/meson-g12b-odroid-n2.dts b/arch/arm/dts/meson-g12b-odroid-n2.dts index 42f1540575..a37f66a5e0 100644 --- a/arch/arm/dts/meson-g12b-odroid-n2.dts +++ b/arch/arm/dts/meson-g12b-odroid-n2.dts @@ -15,15 +15,6 @@ compatible = "hardkernel,odroid-n2", "amlogic,g12b"; model = "Hardkernel ODROID-N2";
- aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x40000000>; diff --git a/arch/arm/dts/meson-khadas-vim3.dtsi b/arch/arm/dts/meson-khadas-vim3.dtsi index 8647da7d66..c6b0ce9a88 100644 --- a/arch/arm/dts/meson-khadas-vim3.dtsi +++ b/arch/arm/dts/meson-khadas-vim3.dtsi @@ -11,15 +11,6 @@ / { model = "Khadas VIM3";
- aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; diff --git a/arch/arm/dts/meson-sm1-sei610.dts b/arch/arm/dts/meson-sm1-sei610.dts index 3435aaa4e8..4372708811 100644 --- a/arch/arm/dts/meson-sm1-sei610.dts +++ b/arch/arm/dts/meson-sm1-sei610.dts @@ -14,15 +14,6 @@ compatible = "seirobotics,sei610", "amlogic,sm1"; model = "SEI Robotics SEI610";
- aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - emmc_pwrseq: emmc-pwrseq { compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;