On 15:40 Wed 12 Mar , Nobuhiro Iwamatsu wrote:
R2D plus is SH reference board used with SH7751R. This board has 266Mhz CPU, 64MB SDRAM, Cardbus, CF interface,
+#undef DEBUG
+#define CONFIG_SH 1 +#define CONFIG_SH4 1 +#define CONFIG_CPU_SH7751 1 +#define CONFIG_CPU_SH_TYPE_R 1 +#define CONFIG_R2DPLUS 1 +/* OLD type R2D plus support*/ +/* #define CONFIG_R2DPLUS_OLD 1 */
^ Whitespace please remove and if no need remove it
+#define __LITTLE_ENDIAN__ 1
+/*
- Command line configuration.
- */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_DFL +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_IDE +#define CONFIG_CMD_EXT2 +#define CONFIG_DOS_PARTITION
+/* SCIF */ +#define CFG_SCIF_CONSOLE 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_CONS_SCIF1 1 +#define BOARD_LATE_INIT 1
+#define CONFIG_BOOTDELAY -1 +#define CONFIG_BOOTARGS "console=ttySC0,115200"
^^^^ Whitespace please remove
+#define CONFIG_ENV_OVERWRITE 1
+/* Network setting */ +#define CONFIG_NETMASK 255.0.0.0 +#define CONFIG_IPADDR 10.0.192.51 +#define CONFIG_SERVERIP 10.0.0.1 +#define CONFIG_GATEWAYIP 10.0.0.1
+/* SDRAM */ +#define CFG_SDRAM_BASE (0x8C000000) +#define CFG_SDRAM_SIZE (0x04000000)
+#define CFG_LONGHELP
+#else /* CONFIG_R2DPLUS_OLD */
+#define CFG_FLASH_BASE (0xA0000000) +#define CFG_FLASH_CFI_WIDTH 0x04 /* 32bit */
^ Whitespace please remove
+#define CFG_MAX_FLASH_BANKS (2) +#define CFG_MAX_FLASH_SECT 270
^ Whitespace please remove
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE,\
CFG_FLASH_BASE + 0x100000,\CFG_FLASH_BASE + 0x400000,\CFG_FLASH_BASE + 0x700000, }+#endif /* CONFIG_R2DPLUS_OLD */
+#define CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE 0x20000 +#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE) +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) +#define CFG_FLASH_ERASE_TOUT 120000
^^ Whitespace please remove
+#define CFG_FLASH_WRITE_TOUT 500
+/*
- SuperH Clock setting
- */
Best Regards, J.