Re: [U-Boot] [PATCH 1/1] Set VLD04 output to 2.8V in PMIC initialization.

Hello Gautam,

On Wed, Jun 21, 2017 at 1:18 PM, Gautam Bhat mindentropy@gmail.com wrote:

This change sets the VLDO4 settings output to 2.8V in PMIC initialization so that the MIPI DSI and MIPI CSI input voltage is 2.8V as per the schematics.

Signed-off-by: Gautam Bhat mindentropy@gmail.com

Thanks for the patch; Fabio, could you take a look at this?