On 2/11/20 4:19 PM, Igor Opaniuk wrote:
From: Igor Opaniuk igor.opaniuk@toradex.com
Convert README to reStructuredText format.
Please, run checkpatch on your patch set:
ERROR: DOS line endings #334: FILE: doc/board/toradex/verdin-imx8mm.rst:111: + Hit any key to stop autoboot: 0^M$
ERROR: DOS line endings #335: FILE: doc/board/toradex/verdin-imx8mm.rst:112: + Verdin iMX8MM #^M$
Best regards
Heinrich
Signed-off-by: Igor Opaniuk igor.opaniuk@toradex.com
board/toradex/verdin-imx8mm/README | 88 ---------------------- doc/board/toradex/index.rst | 1 + doc/board/toradex/verdin-imx8mm.rst | 112 ++++++++++++++++++++++++++++ 3 files changed, 113 insertions(+), 88 deletions(-) delete mode 100644 board/toradex/verdin-imx8mm/README create mode 100644 doc/board/toradex/verdin-imx8mm.rst
diff --git a/board/toradex/verdin-imx8mm/README b/board/toradex/verdin-imx8mm/README deleted file mode 100644 index 1dac969476..0000000000 --- a/board/toradex/verdin-imx8mm/README +++ /dev/null @@ -1,88 +0,0 @@ -U-Boot for the Toradex Verdin iMX8M Mini Module
-Quick Start
-- Build the ARM trusted firmware binary -- Get the DDR firmware -- Build U-Boot -- Flash to eMMC -- Boot
-Get and Build the ARM Trusted Firmware (Trusted Firmware A)
-$ echo "Downloading and building TF-A..." -$ git clone -b imx_4.14.98_2.3.0 https://source.codeaurora.org/external/imx/imx-atf -$ cd imx-atf
-Please edit `plat/imx/imx8mm/include/platform_def.h` so it contains proper -values for UART configuration and BL31 base address (correct values listed -below): -#define BL31_BASE 0x910000 -#define IMX_BOOT_UART_BASE 0x30860000 -#define DEBUG_CONSOLE 1
-Then build ATF (TF-A): -$ make PLAT=imx8mm bl31
-Get the DDR Firmware
-$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.4.1.bin -$ chmod +x firmware-imx-8.4.1.bin -$ ./firmware-imx-8.4.1.bin -$ cp firmware-imx-8.4.1/firmware/ddr/synopsys/lpddr4*.bin ./
-Build U-Boot
-$ export CROSS_COMPILE=aarch64-linux-gnu- -$ make verdin-imx8mm_defconfig -$ make flash.bin
-Flash to eMMC
-> tftpboot ${loadaddr} flash.bin -> setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200 -> mmc dev 0 1 && mmc write ${loadaddr} 0x2 ${blkcnt}
-As a convenience, instead of the last two commands one may also use the update -U-Boot wrapper: -> run update_uboot
-Boot
-ATF, U-boot proper and u-boot.dtb images are packed into FIT image, -which is loaded and parsed by SPL.
-Boot sequence is: -SPL ---> ATF (TF-A) ---> U-boot proper
-Output: -U-Boot SPL 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100) -Normal Boot -Trying to boot from MMC1 -NOTICE: Configuring TZASC380 -NOTICE: RDC off -NOTICE: BL31: v2.0(release):rel_imx_4.14.98_2.3.0-0-g09c5cc994-dirty -NOTICE: BL31: Built : 01:11:41, Jan 25 2020 -NOTICE: sip svc init
-U-Boot 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100)
-CPU: Freescale i.MX8MMQ rev1.0 at 0 MHz -Reset cause: POR -DRAM: 2 GiB -MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 -Loading Environment from MMC... OK -In: serial -Out: serial -Err: serial -Model: Toradex Verdin iMX8M Mini Quad 2GB Wi-Fi / BT IT V1.0A, Serial# 06535149 -Net: eth0: ethernet@30be0000 -Hit any key to stop autoboot: 0 -Verdin iMX8MM # diff --git a/doc/board/toradex/index.rst b/doc/board/toradex/index.rst index aa418d6bad..6cd2ade9f4 100644 --- a/doc/board/toradex/index.rst +++ b/doc/board/toradex/index.rst @@ -7,3 +7,4 @@ Toradex :maxdepth: 2
colibri_imx7
- verdin-imx8mm
diff --git a/doc/board/toradex/verdin-imx8mm.rst b/doc/board/toradex/verdin-imx8mm.rst new file mode 100644 index 0000000000..5363251dee --- /dev/null +++ b/doc/board/toradex/verdin-imx8mm.rst @@ -0,0 +1,112 @@ +.. SPDX-License-Identifier: GPL-2.0+
+Verdin iMX8M Mini Module +===============================================
+Quick Start +-----------
+- Build the ARM trusted firmware binary +- Get the DDR firmware +- Build U-Boot +- Flash to eMMC +- Boot
+Get and Build the ARM Trusted Firmware (Trusted Firmware A) +-----------------------------------------------------------
+.. code-block:: bash
- $ echo "Downloading and building TF-A..."
- $ git clone -b imx_4.14.98_2.3.0 \
https://source.codeaurora.org/external/imx/imx-atf- $ cd imx-atf
+Please edit ``plat/imx/imx8mm/include/platform_def.h`` so it contains proper +values for UART configuration and BL31 base address (correct values listed +below):
+.. code-block:: bash
- #define BL31_BASE 0x910000
- #define IMX_BOOT_UART_BASE 0x30860000
- #define DEBUG_CONSOLE 1
+Then build ATF (TF-A):
+.. code-block:: bash
- $ make PLAT=imx8mm bl31
+Get the DDR Firmware +--------------------
+.. code-block:: bash
- $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.4.1.bin
- $ chmod +x firmware-imx-8.4.1.bin
- $ ./firmware-imx-8.4.1.bin
- $ cp firmware-imx-8.4.1/firmware/ddr/synopsys/lpddr4*.bin ./
+Build U-Boot +------------ +.. code-block:: bash
- $ export CROSS_COMPILE=aarch64-linux-gnu-
- $ make verdin-imx8mm_defconfig
- $ make flash.bin
+Flash to eMMC +-------------
+.. code-block:: bash
+As a convenience, instead of the last two commands one may also use the update +U-Boot wrapper:
+.. code-block:: bash
+Boot +----
+ATF, U-boot proper and u-boot.dtb images are packed into FIT image, +which is loaded and parsed by SPL.
+Boot sequence is:
+* SPL ---> ATF (TF-A) ---> U-boot proper
+Output:
+.. code-block:: bash
- U-Boot SPL 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100)
- Normal Boot
- Trying to boot from MMC1
- NOTICE: Configuring TZASC380
- NOTICE: RDC off
- NOTICE: BL31: v2.0(release):rel_imx_4.14.98_2.3.0-0-g09c5cc994-dirty
- NOTICE: BL31: Built : 01:11:41, Jan 25 2020
- NOTICE: sip svc init
- U-Boot 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100)
- CPU: Freescale i.MX8MMQ rev1.0 at 0 MHz
- Reset cause: POR
- DRAM: 2 GiB
- MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
- Loading Environment from MMC... OK
- In: serial
- Out: serial
- Err: serial
- Model: Toradex Verdin iMX8M Mini Quad 2GB Wi-Fi / BT IT V1.0A, Serial:
- Net: eth0: ethernet@30be0000
- Hit any key to stop autoboot: 0
- Verdin iMX8MM #