Hi Bin,
On 11 December 2014 at 08:34, Bin Meng bmeng.cn@gmail.com wrote:
Hi Jagan,
On Thu, Dec 11, 2014 at 2:41 AM, Jagan Teki jagannadh.teki@gmail.com wrote:
Hi Bin,
On 10 December 2014 at 18:21, Bin Meng bmeng.cn@gmail.com wrote:
This series update SPI flash supported read commands per datasheet in the flash params table, and change flash sector size to 4KiB as long as flash supports sector erase (20h) command, to ensure 'sf erase offset +len' work on 4KiB boundary instead of 64KiB when given SECT_4K.
Changes in v3:
- Rebase with Jagan's patch series @ http://patchwork.ozlabs.org/patch/419154/
Bin Meng (9): sf: Update SST flash params sf: Update Atmel flash params sf: Update EON flash params sf: Update GigaDevice flash params sf: Update Macronix flash params sf: Update Spansion flash params sf: Update Micron flash params sf: Update Winbond flash params sf: Give proper spacing between flash table params
Thanks for the updates - have you verified these changes?
I verified some, but not all of these flash parts. The update is based on flash datasheet, so if something is broken, eg before this series the flash advertises only READ_NORM and after my series it is changed to READ_FULL, and let's say QUAD_IO_FAST is not working, it is very likely that the SPI controller driver has some bugs when supporting QUAD_IO_FAST.
Since these updates were tested before, I will skip these for this PR. Will test all the rest (except these) and send the PR soon.
Let me know your inputs?
drivers/mtd/spi/sf_internal.h | 5 ++ drivers/mtd/spi/sf_params.c | 185 ++++++++++++++++++++++-------------------- drivers/mtd/spi/sf_probe.c | 4 + 3 files changed, 104 insertions(+), 90 deletions(-)
thanks!