Hello Lukasz,
Am 16.05.2014 10:58, schrieb Lukasz Majewski:
Hi Wolfgang, Tom,
Hi Wolfgang,
Dear Lukasz,
In message20140515090904.32f1d13d@amdc2363 you wrote:
What I complained about is the change in behaviour. I asked to make the existing behaviour the default, so unaware users will not be affected. Only if you intentionally want some other behaviour you can then enable this by setting the env variable.
Well, looking at mainline usage of DFU, Lukasz is speaking for about half of the users / implementors. Since Denx is working with the other half, can you shed some light on actual use vs theoretical possibilities?
I don't want to urge anybody on making any conclusion here :-), but I would be very grateful if we could come up with an agreement.
As I've stated previously, my opinion is similar to the one presented by Tom in this message.
For me it would be best to not calculate any checksum on default and only enable it when needed.
I asked Heiko to run some actual tests on the boards where he has to maintain DFU for. For a 288 MiB image he did not measure any difference - with your patch applied, both with and without CRC enabled, we would get the same (slow) 1:54 minutes download time.
As I've spoken with Heiko, am33xx uses NAND memory. I deal with eMMC. Moreover, the size of "chunks" are different - 1 MiB and 32 MiB.
I must double check for the rationale for chunk size of 32 MiB at Trats/Trats2 boards. I suspect, that eMMC write performance depend on that.
I will perform some performance tests with 1 MiB chunk size and share the result.
Unfortunately the 32 MiB is fixed for our platform. since lthor uses it by default.
This reinforces my speculation that you are actually addressing the wrong problem. Instead of adding new code and environment variables and making the system even more complex, we should just leave everything as is,
During working on this patch I've replaced the crc32() method with the call to hash_method(), which IMHO is welcome.
I also don't personally like the crc32, hence I like the choice which this patch gives me to use other algorithm (for which I've got HW support on my platform - e.g. MD5).
and you should try to find out why the CRC calculation is so low for you. Checking if caches are enabled is probably among the things that should be done first.
L1 is enabled. L2 has been disabled on purpose (power consumption reduction).
Regarding L2 - our platform requires SMC calls to enable and manage L2 cache. In my opinion support for this in u-boot is an overkill.
Can we conclude this whole discussion? The main point was if we should keep calculating and displaying crc32 as default for DFU transfers.
I'm for the option to NOT display and calculate it by default (PATCH v3).
I talked with the siemens board customer, they also do not check/use the displayed value from U-Boot ...
So, for me it is OK to not display this value ... but we should add to DFU such a check ... or?
bye, Heiko