Add memory mapped address location of U-Boot images in HyperFlash boot mode.
Signed-off-by: Vignesh Raghavendra vigneshr@ti.com --- include/configs/j721e_evm.h | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/include/configs/j721e_evm.h b/include/configs/j721e_evm.h index c8a76037ff..a570893378 100644 --- a/include/configs/j721e_evm.h +++ b/include/configs/j721e_evm.h @@ -23,8 +23,10 @@ #if defined(CONFIG_TARGET_J721E_A72_EVM) || defined(CONFIG_TARGET_J7200_A72_EVM) #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SPL_TEXT_BASE + \ CONFIG_SYS_K3_NON_SECURE_MSRAM_SIZE) +#define CONFIG_SYS_UBOOT_BASE 0x50280000 /* Image load address in RAM for DFU boot*/ #else +#define CONFIG_SYS_UBOOT_BASE 0x50080000 /* * Maximum size in memory allocated to the SPL BSS. Keep it as tight as * possible (to allow the build to go through), as this directly affects