The static ethernet link type config code is no more needed because now handled by the meson8b glue driver, delete it.
Signed-off-by: Neil Armstrong narmstrong@baylibre.com --- arch/arm/include/asm/arch-meson/axg.h | 22 ------------- arch/arm/include/asm/arch-meson/eth.h | 12 ------- arch/arm/include/asm/arch-meson/g12a.h | 35 --------------------- arch/arm/include/asm/arch-meson/gx.h | 20 ------------ arch/arm/mach-meson/board-axg.c | 34 -------------------- arch/arm/mach-meson/board-g12a.c | 31 ------------------ arch/arm/mach-meson/board-gx.c | 35 --------------------- board/amlogic/beelink-s922x/beelink-s922x.c | 2 -- board/amlogic/odroid-n2/odroid-n2.c | 2 -- board/amlogic/p200/p200.c | 2 -- board/amlogic/p201/p201.c | 2 -- board/amlogic/p212/p212.c | 3 -- board/amlogic/q200/q200.c | 2 -- board/amlogic/s400/s400.c | 2 -- board/amlogic/sei510/sei510.c | 3 -- board/amlogic/sei610/sei610.c | 3 -- board/amlogic/u200/u200.c | 3 +- board/amlogic/vim3/vim3.c | 2 -- board/amlogic/w400/w400.c | 2 +- 19 files changed, 2 insertions(+), 215 deletions(-)
diff --git a/arch/arm/include/asm/arch-meson/axg.h b/arch/arm/include/asm/arch-meson/axg.h index 91c87696e0..12042de935 100644 --- a/arch/arm/include/asm/arch-meson/axg.h +++ b/arch/arm/include/asm/arch-meson/axg.h @@ -31,26 +31,4 @@ #define AXG_AO_BL31_RSVMEM_SIZE_SHIFT 16 #define AXG_AO_BL32_RSVMEM_SIZE_MASK 0xFFFF
-/* Peripherals registers */ -#define AXG_PERIPHS_ADDR(off) (AXG_PERIPHS_BASE + ((off) << 2)) - -#define AXG_ETH_REG_0 AXG_PERIPHS_ADDR(0x50) -#define AXG_ETH_REG_1 AXG_PERIPHS_ADDR(0x51) - -#define AXG_ETH_REG_0_PHY_INTF_RGMII BIT(0) -#define AXG_ETH_REG_0_PHY_INTF_RMII BIT(2) -#define AXG_ETH_REG_0_TX_PHASE(x) (((x) & 3) << 5) -#define AXG_ETH_REG_0_TX_RATIO(x) (((x) & 7) << 7) -#define AXG_ETH_REG_0_PHY_CLK_EN BIT(10) -#define AXG_ETH_REG_0_INVERT_RMII_CLK BIT(11) -#define AXG_ETH_REG_0_CLK_EN BIT(12) - -/* HIU registers */ -#define AXG_HIU_ADDR(off) (AXG_HIU_BASE + ((off) << 2)) - -#define AXG_MEM_PD_REG_0 AXG_HIU_ADDR(0x40) - -/* Ethernet memory power domain */ -#define AXG_MEM_PD_REG_0_ETH_MASK (BIT(2) | BIT(3)) - #endif /* __AXG_H__ */ diff --git a/arch/arm/include/asm/arch-meson/eth.h b/arch/arm/include/asm/arch-meson/eth.h index f765cd7c4c..c0070615c2 100644 --- a/arch/arm/include/asm/arch-meson/eth.h +++ b/arch/arm/include/asm/arch-meson/eth.h @@ -7,18 +7,6 @@ #ifndef __MESON_ETH_H__ #define __MESON_ETH_H__
-#include <phy.h> - -enum { - /* Use Internal RMII PHY */ - MESON_USE_INTERNAL_RMII_PHY = 1, -}; - -/* Configure the Ethernet MAC with the requested interface mode - * with some optional flags. - */ -void meson_eth_init(phy_interface_t mode, unsigned int flags); - /* Generate an unique MAC address based on the HW serial */ int meson_generate_serial_ethaddr(void);
diff --git a/arch/arm/include/asm/arch-meson/g12a.h b/arch/arm/include/asm/arch-meson/g12a.h index db29cc3a00..ef4f301f7d 100644 --- a/arch/arm/include/asm/arch-meson/g12a.h +++ b/arch/arm/include/asm/arch-meson/g12a.h @@ -32,39 +32,4 @@ #define G12A_AO_BL31_RSVMEM_SIZE_SHIFT 16 #define G12A_AO_BL32_RSVMEM_SIZE_MASK 0xFFFF
-/* Peripherals registers */ -#define G12A_PERIPHS_ADDR(off) (G12A_PERIPHS_BASE + ((off) << 2)) - -#define G12A_ETH_REG_0 G12A_PERIPHS_ADDR(0x50) -#define G12A_ETH_REG_1 G12A_PERIPHS_ADDR(0x51) - -#define G12A_ETH_REG_0_PHY_INTF_RGMII BIT(0) -#define G12A_ETH_REG_0_PHY_INTF_RMII BIT(2) -#define G12A_ETH_REG_0_TX_PHASE(x) (((x) & 3) << 5) -#define G12A_ETH_REG_0_TX_RATIO(x) (((x) & 7) << 7) -#define G12A_ETH_REG_0_PHY_CLK_EN BIT(10) -#define G12A_ETH_REG_0_INVERT_RMII_CLK BIT(11) -#define G12A_ETH_REG_0_CLK_EN BIT(12) - -#define G12A_ETH_PHY_ADDR(off) (G12A_ETH_PHY_BASE + ((off) << 2)) -#define ETH_PLL_CNTL0 G12A_ETH_PHY_ADDR(0x11) -#define ETH_PLL_CNTL1 G12A_ETH_PHY_ADDR(0x12) -#define ETH_PLL_CNTL2 G12A_ETH_PHY_ADDR(0x13) -#define ETH_PLL_CNTL3 G12A_ETH_PHY_ADDR(0x14) -#define ETH_PLL_CNTL4 G12A_ETH_PHY_ADDR(0x15) -#define ETH_PLL_CNTL5 G12A_ETH_PHY_ADDR(0x16) -#define ETH_PLL_CNTL6 G12A_ETH_PHY_ADDR(0x17) -#define ETH_PLL_CNTL7 G12A_ETH_PHY_ADDR(0x18) -#define ETH_PHY_CNTL0 G12A_ETH_PHY_ADDR(0x20) -#define ETH_PHY_CNTL1 G12A_ETH_PHY_ADDR(0x21) -#define ETH_PHY_CNTL2 G12A_ETH_PHY_ADDR(0x22) - -/* HIU registers */ -#define G12A_HIU_ADDR(off) (G12A_HIU_BASE + ((off) << 2)) - -#define G12A_MEM_PD_REG_0 G12A_HIU_ADDR(0x40) - -/* Ethernet memory power domain */ -#define G12A_MEM_PD_REG_0_ETH_MASK (BIT(2) | BIT(3)) - #endif /* __G12A_H__ */ diff --git a/arch/arm/include/asm/arch-meson/gx.h b/arch/arm/include/asm/arch-meson/gx.h index 743d2e8bb9..26ec5d0bc3 100644 --- a/arch/arm/include/asm/arch-meson/gx.h +++ b/arch/arm/include/asm/arch-meson/gx.h @@ -41,24 +41,4 @@ #define GX_GPIO_IN(n) GX_PERIPHS_ADDR(_GX_GPIO_OFF(n) + 1) #define GX_GPIO_OUT(n) GX_PERIPHS_ADDR(_GX_GPIO_OFF(n) + 2)
-#define GX_ETH_REG_0 GX_PERIPHS_ADDR(0x50) -#define GX_ETH_REG_1 GX_PERIPHS_ADDR(0x51) -#define GX_ETH_REG_2 GX_PERIPHS_ADDR(0x56) -#define GX_ETH_REG_3 GX_PERIPHS_ADDR(0x57) - -#define GX_ETH_REG_0_PHY_INTF BIT(0) -#define GX_ETH_REG_0_TX_PHASE(x) (((x) & 3) << 5) -#define GX_ETH_REG_0_TX_RATIO(x) (((x) & 7) << 7) -#define GX_ETH_REG_0_PHY_CLK_EN BIT(10) -#define GX_ETH_REG_0_INVERT_RMII_CLK BIT(11) -#define GX_ETH_REG_0_CLK_EN BIT(12) - -/* HIU registers */ -#define GX_HIU_ADDR(off) (GX_HIU_BASE + ((off) << 2)) - -#define GX_MEM_PD_REG_0 GX_HIU_ADDR(0x40) - -/* Ethernet memory power domain */ -#define GX_MEM_PD_REG_0_ETH_MASK (BIT(2) | BIT(3)) - #endif /* __GX_H__ */ diff --git a/arch/arm/mach-meson/board-axg.c b/arch/arm/mach-meson/board-axg.c index 3b14bc9989..71ac65c636 100644 --- a/arch/arm/mach-meson/board-axg.c +++ b/arch/arm/mach-meson/board-axg.c @@ -91,40 +91,6 @@ static struct mm_region axg_mem_map[] = {
struct mm_region *mem_map = axg_mem_map;
-/* Configure the Ethernet MAC with the requested interface mode - * with some optional flags. - */ -void meson_eth_init(phy_interface_t mode, unsigned int flags) -{ - switch (mode) { - case PHY_INTERFACE_MODE_RGMII: - case PHY_INTERFACE_MODE_RGMII_ID: - case PHY_INTERFACE_MODE_RGMII_RXID: - case PHY_INTERFACE_MODE_RGMII_TXID: - /* Set RGMII mode */ - setbits_le32(AXG_ETH_REG_0, AXG_ETH_REG_0_PHY_INTF_RGMII | - AXG_ETH_REG_0_TX_PHASE(1) | - AXG_ETH_REG_0_TX_RATIO(4) | - AXG_ETH_REG_0_PHY_CLK_EN | - AXG_ETH_REG_0_CLK_EN); - break; - - case PHY_INTERFACE_MODE_RMII: - /* Set RMII mode */ - out_le32(AXG_ETH_REG_0, AXG_ETH_REG_0_PHY_INTF_RMII | - AXG_ETH_REG_0_INVERT_RMII_CLK | - AXG_ETH_REG_0_CLK_EN); - break; - - default: - printf("Invalid Ethernet interface mode\n"); - return; - } - - /* Enable power gate */ - clrbits_le32(AXG_MEM_PD_REG_0, AXG_MEM_PD_REG_0_ETH_MASK); -} - #if CONFIG_IS_ENABLED(USB_DWC3_MESON_GXL) && \ CONFIG_IS_ENABLED(USB_GADGET_DWC2_OTG) static struct dwc2_plat_otg_data meson_gx_dwc2_data; diff --git a/arch/arm/mach-meson/board-g12a.c b/arch/arm/mach-meson/board-g12a.c index cc7e01d014..2e59eee8f7 100644 --- a/arch/arm/mach-meson/board-g12a.c +++ b/arch/arm/mach-meson/board-g12a.c @@ -97,37 +97,6 @@ static struct mm_region g12a_mem_map[] = {
struct mm_region *mem_map = g12a_mem_map;
-/* Configure the Ethernet MAC with the requested interface mode - * with some optional flags. - */ -void meson_eth_init(phy_interface_t mode, unsigned int flags) -{ - switch (mode) { - case PHY_INTERFACE_MODE_RGMII: - case PHY_INTERFACE_MODE_RGMII_ID: - case PHY_INTERFACE_MODE_RGMII_RXID: - case PHY_INTERFACE_MODE_RGMII_TXID: - /* Set RGMII mode */ - setbits_le32(G12A_ETH_REG_0, G12A_ETH_REG_0_PHY_INTF_RGMII | - G12A_ETH_REG_0_TX_PHASE(1) | - G12A_ETH_REG_0_TX_RATIO(4) | - G12A_ETH_REG_0_PHY_CLK_EN | - G12A_ETH_REG_0_CLK_EN); - break; - - case PHY_INTERFACE_MODE_RMII: - /* Set RMII mode */ - out_le32(G12A_ETH_REG_0, G12A_ETH_REG_0_PHY_INTF_RMII | - G12A_ETH_REG_0_INVERT_RMII_CLK | - G12A_ETH_REG_0_CLK_EN); - break; - - default: - printf("Invalid Ethernet interface mode\n"); - return; - } -} - #if CONFIG_IS_ENABLED(USB_DWC3_MESON_G12A) && \ CONFIG_IS_ENABLED(USB_GADGET_DWC2_OTG) static struct dwc2_plat_otg_data meson_g12a_dwc2_data; diff --git a/arch/arm/mach-meson/board-gx.c b/arch/arm/mach-meson/board-gx.c index cae7af5afb..01fafd81c4 100644 --- a/arch/arm/mach-meson/board-gx.c +++ b/arch/arm/mach-meson/board-gx.c @@ -109,41 +109,6 @@ static struct mm_region gx_mem_map[] = {
struct mm_region *mem_map = gx_mem_map;
-/* Configure the Ethernet MAC with the requested interface mode - * with some optional flags. - */ -void meson_eth_init(phy_interface_t mode, unsigned int flags) -{ - switch (mode) { - case PHY_INTERFACE_MODE_RGMII: - case PHY_INTERFACE_MODE_RGMII_ID: - case PHY_INTERFACE_MODE_RGMII_RXID: - case PHY_INTERFACE_MODE_RGMII_TXID: - /* Set RGMII mode */ - setbits_le32(GX_ETH_REG_0, GX_ETH_REG_0_PHY_INTF | - GX_ETH_REG_0_TX_PHASE(1) | - GX_ETH_REG_0_TX_RATIO(4) | - GX_ETH_REG_0_PHY_CLK_EN | - GX_ETH_REG_0_CLK_EN); - - break; - - case PHY_INTERFACE_MODE_RMII: - /* Set RMII mode */ - out_le32(GX_ETH_REG_0, GX_ETH_REG_0_INVERT_RMII_CLK | - GX_ETH_REG_0_CLK_EN); - - if (!IS_ENABLED(CONFIG_MESON_GXBB)) - writel(0x10110181, GX_ETH_REG_2); - - break; - - default: - printf("Invalid Ethernet interface mode\n"); - return; - } -} - #if CONFIG_IS_ENABLED(USB_DWC3_MESON_GXL) && \ CONFIG_IS_ENABLED(USB_GADGET_DWC2_OTG) static struct dwc2_plat_otg_data meson_gx_dwc2_data; diff --git a/board/amlogic/beelink-s922x/beelink-s922x.c b/board/amlogic/beelink-s922x/beelink-s922x.c index dc0d933a39..bb74426266 100644 --- a/board/amlogic/beelink-s922x/beelink-s922x.c +++ b/board/amlogic/beelink-s922x/beelink-s922x.c @@ -28,8 +28,6 @@ int misc_init_r(void) meson_get_soc_rev(tmp, sizeof(tmp)) > 0) env_set("soc_rev", tmp);
- meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0); - if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, efuse_mac_addr, EFUSE_MAC_SIZE); diff --git a/board/amlogic/odroid-n2/odroid-n2.c b/board/amlogic/odroid-n2/odroid-n2.c index 863975e51b..88a60f34fe 100644 --- a/board/amlogic/odroid-n2/odroid-n2.c +++ b/board/amlogic/odroid-n2/odroid-n2.c @@ -115,8 +115,6 @@ int misc_init_r(void) meson_get_soc_rev(tmp, sizeof(tmp)) > 0) env_set("soc_rev", tmp);
- meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0); - if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, efuse_mac_addr, EFUSE_MAC_SIZE); diff --git a/board/amlogic/p200/p200.c b/board/amlogic/p200/p200.c index 8f1bf8bfda..7c432f9d28 100644 --- a/board/amlogic/p200/p200.c +++ b/board/amlogic/p200/p200.c @@ -25,8 +25,6 @@ int misc_init_r(void) char serial[EFUSE_SN_SIZE]; ssize_t len;
- meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0); - if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, mac_addr, EFUSE_MAC_SIZE); diff --git a/board/amlogic/p201/p201.c b/board/amlogic/p201/p201.c index 597bb71cbf..7c432f9d28 100644 --- a/board/amlogic/p201/p201.c +++ b/board/amlogic/p201/p201.c @@ -25,8 +25,6 @@ int misc_init_r(void) char serial[EFUSE_SN_SIZE]; ssize_t len;
- meson_eth_init(PHY_INTERFACE_MODE_RMII, 0); - if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, mac_addr, EFUSE_MAC_SIZE); diff --git a/board/amlogic/p212/p212.c b/board/amlogic/p212/p212.c index fbc49e9565..fcef90bce5 100644 --- a/board/amlogic/p212/p212.c +++ b/board/amlogic/p212/p212.c @@ -26,9 +26,6 @@ int misc_init_r(void) char serial[EFUSE_SN_SIZE]; ssize_t len;
- meson_eth_init(PHY_INTERFACE_MODE_RMII, - MESON_USE_INTERNAL_RMII_PHY); - if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, mac_addr, EFUSE_MAC_SIZE); diff --git a/board/amlogic/q200/q200.c b/board/amlogic/q200/q200.c index 62e6fa3d19..3aa6d8f200 100644 --- a/board/amlogic/q200/q200.c +++ b/board/amlogic/q200/q200.c @@ -26,8 +26,6 @@ int misc_init_r(void) char serial[EFUSE_SN_SIZE]; ssize_t len;
- meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0); - if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, mac_addr, EFUSE_MAC_SIZE); diff --git a/board/amlogic/s400/s400.c b/board/amlogic/s400/s400.c index b081942dcc..06a9044fd8 100644 --- a/board/amlogic/s400/s400.c +++ b/board/amlogic/s400/s400.c @@ -16,8 +16,6 @@
int misc_init_r(void) { - meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0); - meson_generate_serial_ethaddr();
return 0; diff --git a/board/amlogic/sei510/sei510.c b/board/amlogic/sei510/sei510.c index 5a5148ea68..bb188c21f7 100644 --- a/board/amlogic/sei510/sei510.c +++ b/board/amlogic/sei510/sei510.c @@ -18,9 +18,6 @@
int misc_init_r(void) { - meson_eth_init(PHY_INTERFACE_MODE_RMII, - MESON_USE_INTERNAL_RMII_PHY); - meson_generate_serial_ethaddr();
env_set("serial#", "AMLG12ASEI510"); diff --git a/board/amlogic/sei610/sei610.c b/board/amlogic/sei610/sei610.c index 27dba93582..6490bac9eb 100644 --- a/board/amlogic/sei610/sei610.c +++ b/board/amlogic/sei610/sei610.c @@ -18,9 +18,6 @@
int misc_init_r(void) { - meson_eth_init(PHY_INTERFACE_MODE_RMII, - MESON_USE_INTERNAL_RMII_PHY); - meson_generate_serial_ethaddr();
env_set("serial#", "AMLG12ASEI610"); diff --git a/board/amlogic/u200/u200.c b/board/amlogic/u200/u200.c index 373235d77a..06a9044fd8 100644 --- a/board/amlogic/u200/u200.c +++ b/board/amlogic/u200/u200.c @@ -16,8 +16,7 @@
int misc_init_r(void) { - meson_eth_init(PHY_INTERFACE_MODE_RMII, - MESON_USE_INTERNAL_RMII_PHY); + meson_generate_serial_ethaddr();
return 0; } diff --git a/board/amlogic/vim3/vim3.c b/board/amlogic/vim3/vim3.c index 7b09617cdc..6cd5f2e115 100644 --- a/board/amlogic/vim3/vim3.c +++ b/board/amlogic/vim3/vim3.c @@ -149,8 +149,6 @@ int misc_init_r(void) char efuse_mac_addr[EFUSE_MAC_SIZE], tmp[3]; ssize_t len;
- meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0); - if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, efuse_mac_addr, EFUSE_MAC_SIZE); diff --git a/board/amlogic/w400/w400.c b/board/amlogic/w400/w400.c index 47a51710dc..4199198496 100644 --- a/board/amlogic/w400/w400.c +++ b/board/amlogic/w400/w400.c @@ -14,7 +14,7 @@
int misc_init_r(void) { - meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0); + meson_generate_serial_ethaddr();
return 0; }