On 17.10.2016 23:28, Moritz Fischer wrote:
Hi Oscar,
On Mon, Oct 17, 2016 at 5:33 PM, Oscar Gomez Fuente oscargomezf@gmail.com wrote:
Ok Michal,
Then you're suggesting change the zynq-picozed.dts file to:
If you're planning to include this into others, make it a .dtsi file.
diff --git a/arch/arm/dts/zynq-picozed.dts b/arch/arm/dts/zynq-picozed.dts index 3408df8..d8ed298 100644 --- a/arch/arm/dts/zynq-picozed.dts +++ b/arch/arm/dts/zynq-picozed.dts @@ -14,6 +14,8 @@
aliases { serial0 = &uart1;
spi0 = &qspi;ethernet0 = &gem0; }; memory {@@ -26,3 +28,18 @@ u-boot,dm-pre-reloc; status = "okay"; };
+&qspi {
u-boot,dm-pre-reloc;status = "okay";+};
+&gem0 {
status = "okay";phy-mode = "rgmii-id";phy-handle = <ðernet_phy>;ethernet_phy: ethernet-phy@0 {reg = <0>;};+};
And add a new dts file with the configuration of the PizoZed FMC Carrier V2 (in this case V2. Avnet has two PicoZed FMC carriers V1 and V2). For example: zynq-picozed-fmc-v2.dts
- Avnet PicoZed FMC carrier V2 DTS
- Copyright (C) 2015 Xilinx, Inc.
- SPDX-License-Identifier: GPL-2.0+
*/ /dts-v1/; #include "zynq-picozed.dts"
should be a .dtsi file then.
If you can't use picozed without carrier board then zynq-picozed should be dtsi.
Thanks, Michal