Hi Kever,
On 07/25/2016 01:50 PM, Kever Yang wrote:
Signed-off-by: Kever Yang kever.yang@rock-chips.com
drivers/mmc/rockchip_sdhci.c | 10 +++++++++- include/configs/rk3399_common.h | 2 +- 2 files changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/rockchip_sdhci.c b/drivers/mmc/rockchip_sdhci.c index 023c29b..a761a86 100644 --- a/drivers/mmc/rockchip_sdhci.c +++ b/drivers/mmc/rockchip_sdhci.c @@ -7,6 +7,7 @@ */
#include <common.h> +#include <clk.h> #include <dm.h> #include <fdtdec.h> #include <libfdt.h> @@ -32,15 +33,22 @@ static int arasan_sdhci_probe(struct udevice *dev) struct rockchip_sdhc_plat *plat = dev_get_platdata(dev); struct rockchip_sdhc *prv = dev_get_priv(dev); struct sdhci_host *host = &prv->host;
struct clk clk; int ret; u32 caps;
host->version = sdhci_readw(host, SDHCI_HOST_VERSION); host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD;
ret = clk_get_by_index(dev, 0, &clk);
if (ret < 0)
debug("%s get clock fail\n", __func__);ret = clk_set_rate(&clk, CONFIG_ROCKCHIP_SDHCI_MAX_FREQ);
Even if failed to get the clk, clk_set_rate() is called...right?
- caps = sdhci_readl(host, SDHCI_CAPABILITIES); ret = sdhci_setup_cfg(&plat->cfg, dev->name, host->bus_width,
caps, CONFIG_ROCKCHIP_SDHCI_MAX_FREQ, EMMC_MIN_FREQ,
caps, ret, EMMC_MIN_FREQ,
Don't use "ret"..use the meaningful variable for maximum clock.
host->version, host->quirks, 0);host->mmc = &plat->mmc; diff --git a/include/configs/rk3399_common.h b/include/configs/rk3399_common.h index 6ce1aa7..eacbe4b 100644 --- a/include/configs/rk3399_common.h +++ b/include/configs/rk3399_common.h @@ -32,7 +32,7 @@ #define CONFIG_GENERIC_MMC #define CONFIG_SDHCI #define CONFIG_BOUNCE_BUFFER -#define CONFIG_ROCKCHIP_SDHCI_MAX_FREQ 200000000 +#define CONFIG_ROCKCHIP_SDHCI_MAX_FREQ (198*1000000)
Why change from 200MHz to 198MHz?
Best Regards, Jaehoon Chung
#define CONFIG_FAT_WRITE