The Allwinner T113-s SoC is apparently using the same (or at least a very similar) die as the D1/D1s, but replaces the single RISC-V core with two Arm Cortex-A7 cores. Since the D1 core .dtsi already describes all common peripherals, we just need a DT describing the ARM specific peripherals: the CPU cores, the Generic Timer, the GIC and the PMU. We include the core .dtsi directly from the riscv DT directory.
The ARM core version of the DT specifies the CPUX watchdog as "reserved", which means it won't be recognised by U-Boot. Override this in our generic sunxi-u-boot.dtsi, to let U-Boot pick up this watchdog, so that the generic reset driver will work.
Signed-off-by: Andre Przywara andre.przywara@arm.com --- arch/arm/dts/sun8i-t113s.dtsi | 59 ++++++++++++++++++++++++++++++++++ arch/arm/dts/sunxi-u-boot.dtsi | 7 ++++ 2 files changed, 66 insertions(+) create mode 100644 arch/arm/dts/sun8i-t113s.dtsi
diff --git a/arch/arm/dts/sun8i-t113s.dtsi b/arch/arm/dts/sun8i-t113s.dtsi new file mode 100644 index 00000000000..ce008831307 --- /dev/null +++ b/arch/arm/dts/sun8i-t113s.dtsi @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +// Copyright (C) 2022 Arm Ltd. + +#define SOC_PERIPHERAL_IRQ(nr) GIC_SPI nr + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <../../riscv/dts/sunxi-d1s-t113.dtsi> +#include <../../riscv/dts/sunxi-d1-t113.dtsi> + +/ { + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; + }; + }; + + gic: interrupt-controller@1c81000 { + compatible = "arm,gic-400"; + reg = <0x03021000 0x1000>, + <0x03022000 0x2000>, + <0x03024000 0x2000>, + <0x03026000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; +}; diff --git a/arch/arm/dts/sunxi-u-boot.dtsi b/arch/arm/dts/sunxi-u-boot.dtsi index af419c7e590..a0c8abb7033 100644 --- a/arch/arm/dts/sunxi-u-boot.dtsi +++ b/arch/arm/dts/sunxi-u-boot.dtsi @@ -23,6 +23,13 @@ }; };
+/* Let U-Boot be the firmware layer that controls the watchdog. */ +#ifdef CONFIG_MACH_SUN8I_R528 +&wdt { + status = "okay"; +}; +#endif + &binman { u-boot-sunxi-with-spl { filename = "u-boot-sunxi-with-spl.bin";