Add a driver-model version of this driver which mostly uses the existing code. The old code can be removed once all boards are switched over.
Signed-off-by: Simon Glass sjg@chromium.org ---
drivers/mmc/sunxi_mmc.c | 134 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 134 insertions(+)
diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c index 23bef94f24..8886e351f0 100644 --- a/drivers/mmc/sunxi_mmc.c +++ b/drivers/mmc/sunxi_mmc.c @@ -9,6 +9,7 @@ */
#include <common.h> +#include <dm.h> #include <errno.h> #include <malloc.h> #include <mmc.h> @@ -19,14 +20,21 @@ #include <asm/arch/mmc.h> #include <asm-generic/gpio.h>
+struct sunxi_mmc_plat { + struct mmc_config cfg; + struct mmc mmc; +}; + struct sunxi_mmc_priv { unsigned mmc_no; uint32_t *mclkreg; unsigned fatal_err; + struct gpio_desc cd_gpio; /* Change Detect GPIO */ struct sunxi_mmc *reg; struct mmc_config cfg; };
+#if !CONFIG_IS_ENABLED(DM_MMC) /* support 4 mmc hosts */ struct sunxi_mmc_priv mmc_host[4];
@@ -83,6 +91,7 @@ static int mmc_resource_init(int sdc_no)
return ret; } +#endif
static int mmc_set_mod_clk(struct sunxi_mmc_priv *priv, unsigned int hz) { @@ -224,6 +233,7 @@ static int sunxi_mmc_set_ios_common(struct sunxi_mmc_priv *priv, return 0; }
+#if !CONFIG_IS_ENABLED(DM_MMC) static int sunxi_mmc_core_init(struct mmc *mmc) { struct sunxi_mmc_priv *priv = mmc->priv; @@ -234,6 +244,7 @@ static int sunxi_mmc_core_init(struct mmc *mmc)
return 0; } +#endif
static int mmc_trans_data_by_cpu(struct sunxi_mmc_priv *priv, struct mmc *mmc, struct mmc_data *data) @@ -408,6 +419,7 @@ out: return error; }
+#if !CONFIG_IS_ENABLED(DM_MMC) static int sunxi_mmc_set_ios_legacy(struct mmc *mmc) { struct sunxi_mmc_priv *priv = mmc->priv; @@ -488,3 +500,125 @@ struct mmc *sunxi_mmc_init(int sdc_no)
return mmc_create(cfg, mmc_host); } +#else + +static int sunxi_mmc_set_ios(struct udevice *dev) +{ + struct sunxi_mmc_plat *plat = dev_get_platdata(dev); + struct sunxi_mmc_priv *priv = dev_get_priv(dev); + + return sunxi_mmc_set_ios_common(priv, &plat->mmc); +} + +static int sunxi_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd, + struct mmc_data *data) +{ + struct sunxi_mmc_plat *plat = dev_get_platdata(dev); + struct sunxi_mmc_priv *priv = dev_get_priv(dev); + + return sunxi_mmc_send_cmd_common(priv, &plat->mmc, cmd, data); +} + +static int sunxi_mmc_getcd(struct udevice *dev) +{ + struct sunxi_mmc_priv *priv = dev_get_priv(dev); + + if (dm_gpio_is_valid(&priv->cd_gpio)) + return dm_gpio_get_value(&priv->cd_gpio); + + return 1; +} + +static const struct dm_mmc_ops sunxi_mmc_ops = { + .send_cmd = sunxi_mmc_send_cmd, + .set_ios = sunxi_mmc_set_ios, + .get_cd = sunxi_mmc_getcd, +}; + +static int sunxi_mmc_probe(struct udevice *dev) +{ + struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); + struct sunxi_mmc_plat *plat = dev_get_platdata(dev); + struct sunxi_mmc_priv *priv = dev_get_priv(dev); + struct mmc_config *cfg = &plat->cfg; + struct ofnode_phandle_args args; + u32 *gate_reg; + int bus_width, ret; + + cfg->name = dev->name; + bus_width = dev_read_u32_default(dev, "bus-width", 1); + + cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; + cfg->host_caps = 0; + if (bus_width == 8) + cfg->host_caps |= MMC_MODE_8BIT; + if (bus_width >= 4) + cfg->host_caps |= MMC_MODE_4BIT; + cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS; + cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT; + + cfg->f_min = 400000; + cfg->f_max = 52000000; + + priv->reg = (void *)dev_read_addr(dev); + + /* We don't have a sunxi clock driver so find the clock address here */ + ret = dev_read_phandle_with_args(dev, "clocks", "#clock-cells", 0, + 1, &args); + if (ret) + return ret; + priv->mclkreg = (u32 *)ofnode_get_addr(args.node); + + ret = dev_read_phandle_with_args(dev, "clocks", "#clock-cells", 0, + 0, &args); + if (ret) + return ret; + gate_reg = (u32 *)ofnode_get_addr(args.node); + setbits_le32(gate_reg, 1 << args.args[0]); + priv->mmc_no = args.args[0] - 8; + + ret = mmc_set_mod_clk(priv, 24000000); + if (ret) + return ret; + + /* This GPIO is optional */ + if (!gpio_request_by_name(dev, "cd-gpios", 0, &priv->cd_gpio, + GPIOD_IS_IN)) { + int cd_pin = gpio_get_number(&priv->cd_gpio); + + printf("cd_pin = %d\n", cd_pin); + sunxi_gpio_set_pull(cd_pin, SUNXI_GPIO_PULL_UP); + } + + upriv->mmc = &plat->mmc; + + /* Reset controller */ + writel(SUNXI_MMC_GCTRL_RESET, &priv->reg->gctrl); + udelay(1000); + + return 0; +} + +static int sunxi_mmc_bind(struct udevice *dev) +{ + struct sunxi_mmc_plat *plat = dev_get_platdata(dev); + + return mmc_bind(dev, &plat->mmc, &plat->cfg); +} + +static const struct udevice_id sunxi_mmc_ids[] = { + { .compatible = "allwinner,sun5i-a13-mmc" }, + { } +}; + +U_BOOT_DRIVER(sunxi_mmc_drv) = { + .name = "sunxi_mmc", + .id = UCLASS_MMC, + .of_match = sunxi_mmc_ids, + .bind = sunxi_mmc_bind, + .probe = sunxi_mmc_probe, + .ops = &sunxi_mmc_ops, + .platdata_auto_alloc_size = sizeof(struct sunxi_mmc_plat), + .priv_auto_alloc_size = sizeof(struct sunxi_mmc_priv), +}; +#endif