I tried to use the CFI driver by adding the CFI macros in the .h file. But the size of my flash is 2MB, but it shows 4MB. I have one doubt, in the board .h file we specify the sectore size. what size i must give the sector size in board .h file. where we specify different sizes of sector in the flash driver file.. (i.e 8 * 4K, 63 * 32 K.)
Regards.
--- Wolfgang Denk wd@denx.de wrote:
First: Please post U-Boot related questions to the mailing list *only* - unless you as ENX for commercial support which we will happily provide, but that's not for free.
In message 183967.9154.qm@web7711.mail.in.yahoo.com you wrote:
CFI supports only the same size sector flash, but
This is not correct. The CFI driver also supports boot sector type flash chips.
is't the right procedure what i am trying to add
the
flash support for AT49BV320C
If the flashis CFI conforming,then you should use the CFI driver.
Best regards,
Wolfgang Denk
-- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de Computers are not intelligent. They only think they are.
5, 50, 500, 5000 - Store N number of mails in your inbox. Go to http://help.yahoo.com/l/in/yahoo/mail/yahoomail/tools/tools-08.html