Align the list of default commands mentioned in the configuration options paragraph of the README with the actual definitions found in include/config_cmd_default.h
Signed-off-by: Vincent Stehlé vincent.stehle@freescale.com --- README | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/README b/README index cd0336c..787d40f 100644 --- a/README +++ b/README @@ -843,7 +843,7 @@ The following options need to be configured: CONFIG_CMD_FDOS * Dos diskette Support CONFIG_CMD_FLASH flinfo, erase, protect CONFIG_CMD_FPGA FPGA device initialization support - CONFIG_CMD_FUSE Device fuse support + CONFIG_CMD_FUSE * Device fuse support CONFIG_CMD_GETTIME * Get time since boot CONFIG_CMD_GO * the 'go' command (exec code) CONFIG_CMD_GREPENV * search environment @@ -853,7 +853,7 @@ The following options need to be configured: CONFIG_CMD_IDE * IDE harddisk support CONFIG_CMD_IMI iminfo CONFIG_CMD_IMLS List all images found in NOR flash - CONFIG_CMD_IMLS_NAND List all images found in NAND flash + CONFIG_CMD_IMLS_NAND * List all images found in NAND flash CONFIG_CMD_IMMAP * IMMR dump support CONFIG_CMD_IMPORTENV * import an environment CONFIG_CMD_INI * import data from an ini file into the env @@ -861,23 +861,24 @@ The following options need to be configured: CONFIG_CMD_ITEST Integer/string test of 2 values CONFIG_CMD_JFFS2 * JFFS2 Support CONFIG_CMD_KGDB * kgdb - CONFIG_CMD_LDRINFO ldrinfo (display Blackfin loader) + CONFIG_CMD_LDRINFO * ldrinfo (display Blackfin loader) CONFIG_CMD_LINK_LOCAL * link-local IP address auto-configuration (169.254.*.*) CONFIG_CMD_LOADB loadb CONFIG_CMD_LOADS loads - CONFIG_CMD_MD5SUM print md5 message digest + CONFIG_CMD_MD5SUM * print md5 message digest (requires CONFIG_CMD_MEMORY and CONFIG_MD5) CONFIG_CMD_MEMINFO * Display detailed memory information CONFIG_CMD_MEMORY md, mm, nm, mw, cp, cmp, crc, base, loop, loopw - CONFIG_CMD_MEMTEST mtest + CONFIG_CMD_MEMTEST * mtest CONFIG_CMD_MISC Misc functions like sleep etc CONFIG_CMD_MMC * MMC memory mapped support CONFIG_CMD_MII * MII utility commands CONFIG_CMD_MTDPARTS * MTD partition support CONFIG_CMD_NAND * NAND support CONFIG_CMD_NET bootp, tftpboot, rarpboot + CONFIG_CMD_NFS NFS support CONFIG_CMD_PCA953X * PCA953x I2C gpio commands CONFIG_CMD_PCA953X_INFO * PCA953x I2C gpio info command CONFIG_CMD_PCI * pciinfo @@ -896,7 +897,7 @@ The following options need to be configured: CONFIG_CMD_SETGETDCR Support for DCR Register access (4xx only) CONFIG_CMD_SF * Read/write/erase SPI NOR flash - CONFIG_CMD_SHA1SUM print sha1 memory digest + CONFIG_CMD_SHA1SUM * print sha1 memory digest (requires CONFIG_CMD_MEMORY) CONFIG_CMD_SOFTSWITCH * Soft switch setting command for BF60x CONFIG_CMD_SOURCE "source" command Support @@ -908,6 +909,7 @@ The following options need to be configured: CONFIG_CMD_USB * USB support CONFIG_CMD_CDP * Cisco Discover Protocol support CONFIG_CMD_MFSL * Microblaze FSL support + CONFIG_CMD_XIMG Load part of Multi Image
EXAMPLE: If you want all functions except of network