This converts the clint driver from the riscv-specific interface to be a DM-based UCLASS_TIMER driver. In addition, the SiFive DDR driver previously implicitly depended on the CLINT to select REGMAP.
Unlike Andes's PLMT/PLIC (which AFAIK never have anything pass it a dtb), the SiFive CLINT is part of the device tree passed in by qemu. This device tree doesn't have a clocks or clock-frequency property on clint, so we need to fall back on the timebase-frequency property. Perhaps in the future we can get a clock-frequency property added to the qemu dtb.
Unlike with the Andes PLMT, the Sifive CLINT is also an IPI controller. RISCV_SYSCON_CLINT is retained for this purpose.
Signed-off-by: Sean Anderson seanga2@gmail.com Reviewed-by: Pragnesh Patel pragnesh.patel@openfive.com --- This patch builds but has only been tested on the K210 and QEMU. It has NOT been tested on a HiFive.
Changes in v5: - Don't add a dependency on REGMAP for SIFIVE_FU540_DDR. Instead, depend on Bin Meng's patch.
Changes in v4: - Use timer_timebase_fallback
Changes in v3: - Don't initialize the IPI in spl_invoke_opensbi. Further testing has revealed it to be unnecessary.
arch/riscv/Kconfig | 4 --- arch/riscv/lib/sifive_clint.c | 66 +++++++++++++++++++---------------- 2 files changed, 36 insertions(+), 34 deletions(-)
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index d9155b9bab..aaa3b833a5 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -155,10 +155,6 @@ config 64BIT config SIFIVE_CLINT bool depends on RISCV_MMODE || SPL_RISCV_MMODE - select REGMAP - select SYSCON - select SPL_REGMAP if SPL - select SPL_SYSCON if SPL help The SiFive CLINT block holds memory-mapped control and status registers associated with software and timer interrupts. diff --git a/arch/riscv/lib/sifive_clint.c b/arch/riscv/lib/sifive_clint.c index b9a2c649cc..c9704c596f 100644 --- a/arch/riscv/lib/sifive_clint.c +++ b/arch/riscv/lib/sifive_clint.c @@ -8,9 +8,9 @@ */
#include <common.h> +#include <clk.h> #include <dm.h> -#include <regmap.h> -#include <syscon.h> +#include <timer.h> #include <asm/io.h> #include <asm/syscon.h> #include <linux/err.h> @@ -24,35 +24,19 @@
DECLARE_GLOBAL_DATA_PTR;
-int riscv_get_time(u64 *time) -{ - /* ensure timer register base has a sane value */ - riscv_init_ipi(); - - *time = readq((void __iomem *)MTIME_REG(gd->arch.clint)); - - return 0; -} - -int riscv_set_timecmp(int hart, u64 cmp) -{ - /* ensure timer register base has a sane value */ - riscv_init_ipi(); - - writeq(cmp, (void __iomem *)MTIMECMP_REG(gd->arch.clint, hart)); - - return 0; -} - int riscv_init_ipi(void) { - if (!gd->arch.clint) { - long *ret = syscon_get_first_range(RISCV_SYSCON_CLINT); + int ret; + struct udevice *dev;
- if (IS_ERR(ret)) - return PTR_ERR(ret); - gd->arch.clint = ret; - } + ret = uclass_get_device_by_driver(UCLASS_TIMER, + DM_GET_DRIVER(sifive_clint), &dev); + if (ret) + return ret; + + gd->arch.clint = dev_read_addr_ptr(dev); + if (!gd->arch.clint) + return -EINVAL;
return 0; } @@ -78,14 +62,36 @@ int riscv_get_ipi(int hart, int *pending) return 0; }
+static int sifive_clint_get_count(struct udevice *dev, u64 *count) +{ + *count = readq((void __iomem *)MTIME_REG(dev->priv)); + + return 0; +} + +static const struct timer_ops sifive_clint_ops = { + .get_count = sifive_clint_get_count, +}; + +static int sifive_clint_probe(struct udevice *dev) +{ + dev->priv = dev_read_addr_ptr(dev); + if (!dev->priv) + return -EINVAL; + + return timer_timebase_fallback(dev); +} + static const struct udevice_id sifive_clint_ids[] = { - { .compatible = "riscv,clint0", .data = RISCV_SYSCON_CLINT }, + { .compatible = "riscv,clint0" }, { } };
U_BOOT_DRIVER(sifive_clint) = { .name = "sifive_clint", - .id = UCLASS_SYSCON, + .id = UCLASS_TIMER, .of_match = sifive_clint_ids, + .probe = sifive_clint_probe, + .ops = &sifive_clint_ops, .flags = DM_FLAG_PRE_RELOC, };