Add sfc and flash node to device tree and config options to enable support for booting from SPI NOR flash on Radxa ROCK 5 Model B.
Signed-off-by: Jonas Karlman jonas@kwiboo.se Reviewed-by: Kever Yang kever.yang@rock-chips.com --- v2: - Add and use BROM_BOOTSOURCE_SPINOR_RK3588 enum value - Rebased to resolve conflicts - Collect r-b tag
arch/arm/dts/rk3588-rock-5b-u-boot.dtsi | 24 ++++++++++++++++++++ arch/arm/dts/rk3588s-u-boot.dtsi | 20 ++++++++++++++++ arch/arm/include/asm/arch-rockchip/bootrom.h | 1 + arch/arm/mach-rockchip/rk3588/rk3588.c | 1 + configs/rock5b-rk3588_defconfig | 10 ++++++++ 5 files changed, 56 insertions(+)
diff --git a/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi b/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi index db342e6a9391..1cd8a57a6fa6 100644 --- a/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi +++ b/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi @@ -11,6 +11,7 @@ / { aliases { mmc1 = &sdmmc; + spi0 = &sfc; };
chosen { @@ -54,6 +55,10 @@ bootph-all; };
+&fspim2_pins { + bootph-all; +}; + &pcie2x1l2 { pinctrl-names = "default"; pinctrl-0 = <&pcie2x1l2_pins &pcie_reset_h>; @@ -123,6 +128,25 @@ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_data_strobe &emmc_rstnout>; };
+&sfc { + bootph-pre-ram; + u-boot,spl-sfc-no-dma; + pinctrl-names = "default"; + pinctrl-0 = <&fspim2_pins>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash@0 { + bootph-pre-ram; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + }; +}; + &uart2m0_xfer { bootph-all; }; diff --git a/arch/arm/dts/rk3588s-u-boot.dtsi b/arch/arm/dts/rk3588s-u-boot.dtsi index 2c4cad82b38f..64c309046587 100644 --- a/arch/arm/dts/rk3588s-u-boot.dtsi +++ b/arch/arm/dts/rk3588s-u-boot.dtsi @@ -165,6 +165,15 @@ }; };
+ sfc: spi@fe2b0000 { + compatible = "rockchip,sfc"; + reg = <0x0 0xfe2b0000 0x0 0x4000>; + interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>; + clock-names = "clk_sfc", "hclk_sfc"; + status = "disabled"; + }; + otp: nvmem@fecc0000 { compatible = "rockchip,rk3588-otp"; reg = <0x0 0xfecc0000 0x0 0x400>; @@ -241,3 +250,14 @@ &ioc { bootph-pre-ram; }; + +#ifdef CONFIG_ROCKCHIP_SPI_IMAGE +&binman { + simple-bin-spi { + mkimage { + args = "-n", CONFIG_SYS_SOC, "-T", "rksd"; + offset = <0x8000>; + }; + }; +}; +#endif diff --git a/arch/arm/include/asm/arch-rockchip/bootrom.h b/arch/arm/include/asm/arch-rockchip/bootrom.h index 4276a0f6811a..7dab18fbc3fb 100644 --- a/arch/arm/include/asm/arch-rockchip/bootrom.h +++ b/arch/arm/include/asm/arch-rockchip/bootrom.h @@ -48,6 +48,7 @@ enum { BROM_BOOTSOURCE_SPINOR = 3, BROM_BOOTSOURCE_SPINAND = 4, BROM_BOOTSOURCE_SD = 5, + BROM_BOOTSOURCE_SPINOR_RK3588 = 6, BROM_BOOTSOURCE_USB = 10, BROM_LAST_BOOTSOURCE = BROM_BOOTSOURCE_USB }; diff --git a/arch/arm/mach-rockchip/rk3588/rk3588.c b/arch/arm/mach-rockchip/rk3588/rk3588.c index 18e67b5ca9b2..b1f535fad505 100644 --- a/arch/arm/mach-rockchip/rk3588/rk3588.c +++ b/arch/arm/mach-rockchip/rk3588/rk3588.c @@ -41,6 +41,7 @@ const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { [BROM_BOOTSOURCE_EMMC] = "/mmc@fe2e0000", [BROM_BOOTSOURCE_SPINOR] = "/spi@fe2b0000/flash@0", [BROM_BOOTSOURCE_SD] = "/mmc@fe2c0000", + [BROM_BOOTSOURCE_SPINOR_RK3588] = "/spi@fe2b0000/flash@0", };
static struct mm_region rk3588_mem_map[] = { diff --git a/configs/rock5b-rk3588_defconfig b/configs/rock5b-rk3588_defconfig index 5fe3a3542e11..9d0b55c01ac9 100644 --- a/configs/rock5b-rk3588_defconfig +++ b/configs/rock5b-rk3588_defconfig @@ -8,15 +8,20 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=2 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000 +CONFIG_SF_DEFAULT_SPEED=24000000 +CONFIG_SF_DEFAULT_MODE=0x2000 CONFIG_DEFAULT_DEVICE_TREE="rk3588-rock-5b" CONFIG_ROCKCHIP_RK3588=y CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y +CONFIG_ROCKCHIP_SPI_IMAGE=y CONFIG_SPL_SERIAL=y CONFIG_SPL_STACK_R_ADDR=0x600000 CONFIG_TARGET_ROCK5B_RK3588=y CONFIG_SPL_STACK=0x400000 CONFIG_DEBUG_UART_BASE=0xFEB50000 CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0xc00800 CONFIG_PCI=y CONFIG_DEBUG_UART=y @@ -36,6 +41,8 @@ CONFIG_SPL_BSS_MAX_SIZE=0x4000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set CONFIG_SPL_STACK_R=y +CONFIG_SPL_SPI_LOAD=y +CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000 CONFIG_SPL_ATF=y CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y @@ -61,6 +68,8 @@ CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_SDMA=y # CONFIG_SPL_MMC_SDHCI_SDMA is not set CONFIG_MMC_SDHCI_ROCKCHIP=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_XTX=y CONFIG_ETH_DESIGNWARE=y CONFIG_GMAC_ROCKCHIP=y CONFIG_PCIE_DW_ROCKCHIP=y @@ -73,6 +82,7 @@ CONFIG_SPL_RAM=y CONFIG_BAUDRATE=1500000 CONFIG_DEBUG_UART_SHIFT=2 CONFIG_SYS_NS16550_MEM32=y +CONFIG_ROCKCHIP_SFC=y CONFIG_SYSRESET=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y