On 2024/7/30 22:51, Jonas Karlman wrote:
With the emmc and uart0 DT nodes updated to v6.11-rc1 in dts/upstream there is no longer any need to keep overrides in board u-boot dtsi.
Signed-off-by: Jonas Karlman jonas@kwiboo.se
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Thanks, - Kever
arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi | 19 ------------------- 1 file changed, 19 deletions(-)
diff --git a/arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi b/arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi index a6fb8b12da38..ff5bab316a34 100644 --- a/arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi +++ b/arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi @@ -4,17 +4,6 @@ */ #include "rk3308-u-boot.dtsi"
-&emmc {
- cap-sd-highspeed;
- pinctrl-names = "default";
- pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus4>;
-};
-&emmc_bus4 {
- bootph-pre-ram;
- bootph-some-ram;
-};
- &u2phy_otg { /delete-property/ phy-supply; };
@@ -24,14 +13,6 @@ clock-frequency = <24000000>; };
-&uart0_cts {
- bootph-all;
-};
-&uart0_rts {
- bootph-all;
-};
- &uart0_xfer { bootph-all; };