Add fsl_ddr:ecc=on in hwconfig. If ECC is enabled in board configuration file, ECC can be turned on/off by this switch. If this switch is omitted, it is ON by default.
Syntax is hwconfig=fsl_ddr:ecc=on
Signed-off-by: York Sun yorksun@freescale.com --- arch/powerpc/cpu/mpc8xxx/ddr/options.c | 9 ++++++--- doc/README.fsl-ddr | 7 +++++++ 2 files changed, 13 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/options.c b/arch/powerpc/cpu/mpc8xxx/ddr/options.c index 774c0e4..38260f5 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/options.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/options.c @@ -81,10 +81,13 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, /* Operational Mode Paramters */
/* Pick ECC modes */ -#ifdef CONFIG_DDR_ECC - popts->ECC_mode = 1; /* 0 = disabled, 1 = enabled */ -#else popts->ECC_mode = 0; /* 0 = disabled, 1 = enabled */ +#ifdef CONFIG_DDR_ECC + if (hwconfig_sub("fsl_ddr", "ecc")) { + if (hwconfig_subarg_cmp("fsl_ddr", "ecc", "on")) + popts->ECC_mode = 1; + } else + popts->ECC_mode = 1; #endif popts->ECC_init_using_memctl = 1; /* 0 = use DMA, 1 = use memctl */
diff --git a/doc/README.fsl-ddr b/doc/README.fsl-ddr index 1657ef6..9e3c539 100644 --- a/doc/README.fsl-ddr +++ b/doc/README.fsl-ddr @@ -78,6 +78,13 @@ If the DDR controller supports address hashing, it can be enabled by hwconfig. Syntax is: hwconfig=fsl_ddr:addr_hash=true
+Memory controller ECC on/off +============================ +If ECC is enabled in board configuratoin file, i.e. #define CONFIG_DDR_ECC, +ECC can be turned on/off by hwconfig. + +Syntax is +hwconfig=fsl_ddr:ecc=off
Memory testing options for mpc85xx ==================================