1 Feb
2019
1 Feb
'19
2:10 p.m.
Am 29.01.19 um 10:58 schrieb Horatiu Vultur:
When power cycle the Jaguar2 boards, it couldn't read the phys, therefore it always deduce that the board type is pcb111.
Add a small delay after setting the gpio pins, fix the issue.
Signed-off-by: Horatiu Vultur horatiu.vultur@microchip.com
board/mscc/jr2/jr2.c | 3 +++ 1 file changed, 3 insertions(+)
applied to u-boot-mips, thanks.
--
- Daniel