Kim,
the 2nd TSEC has stopped working on both U-Boot and Linux on our MPC8343 based system (MVBLM7). Actually I stumbled over this by accident...
TSEC0+1 are using an VSC8601 connected via RGMII.
Since both Bootloader (U-Boot 2010.3) and OS (Linux 2.6.26.27) are affected I suspect a configuration problem.
The PHY is working fine according to LED signalling.
mvBL-M7> mii info ->TSEC0 unplugged: PHY 0x10: OUI = 0x01C1, Model = 0x02, Rev = 0x01, 10baseT, HDX ->TSEC1 plugged into GigE Network. PHY 0x11: OUI = 0x01C1, Model = 0x02, Rev = 0x01, 100baseT, FDX PHY 0x1F: OUI = 0x0000, Model = 0x00, Rev = 0x00, 10baseT, HDX
mvBL-M7> set ethact TSEC1 mvBL-M7> bootp Speed: 1000, full duplex Random delay: 603 ms... BOOTP broadcast 1 ....
Any hints where to look ? Have I missed some changes lately ?
Regards, André
MATRIX VISION GmbH, Talstrasse 16, DE-71570 Oppenweiler Registergericht: Amtsgericht Stuttgart, HRB 271090 Geschaeftsfuehrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner, Hans-Joachim Reich