Yuli Barcohen <yuli <at> arabellasw.com> writes:
The attached patch adds support for EmbeddedPlanet EP88x boards. It was tested on EP88xC board with MPC885 processor, 64MB RAM, and 16MB flash.
Thank you for the patch. The code should help me a lot. However, when I tried to test it with my board and EP885C, I got no output to the terminal. When I try to step through it, everything goes fine until it appears to go into an infinite loop in sdram_table. The point where it loops looks like this in the debugger:
0xfc01b410 in sdram_table () (gdb) 0xfc01b348 in sdram_table () (gdb)
Do you have any idea why it would be doing this?
Also, because it may solve the problem, what version of u-boot did you write the patch against? I am using the stable 1.1.2 build, but I guess you may have used some CVS version.