The code base is generic to add more P1_P2 RDB platforms support as and when required. The folder and file names are such that they can cater to future SOCs of P1/P2 family. P1 P2 processors are 85xx platforms which fall in Low End and Ultra Low End band of Freescale QorIQ series.
Tested the following on P2020RDB: 1. eTSECs(1/2/3) 2. DDR, NAND, NOR, I2C, PCIe, etc
Signed-off-by: Poonam Aggrwal poonam.aggrwal@freescale.com --- -Based of u-boot version 2009.08-rc1 -Incorporated comments of Wolfgang and Kumar Gala. -get_mem_size has not been because the board has onboard fixed memory with pre-known memory size. MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 7 + board/freescale/p1_p2_rdb/Makefile | 53 +++ board/freescale/p1_p2_rdb/config.mk | 32 ++ board/freescale/p1_p2_rdb/ddr.c | 189 +++++++++++ board/freescale/p1_p2_rdb/law.c | 37 +++ board/freescale/p1_p2_rdb/p1_p2_rdb.c | 228 ++++++++++++++ board/freescale/p1_p2_rdb/pci.c | 177 +++++++++++ board/freescale/p1_p2_rdb/tlb.c | 82 +++++ board/freescale/p1_p2_rdb/u-boot.lds | 143 +++++++++ doc/README.p2020rdb | 143 +++++++++ include/configs/P1_P2_RDB.h | 559 +++++++++++++++++++++++++++++++++ 13 files changed, 1655 insertions(+), 0 deletions(-) create mode 100644 board/freescale/p1_p2_rdb/Makefile create mode 100644 board/freescale/p1_p2_rdb/config.mk create mode 100644 board/freescale/p1_p2_rdb/ddr.c create mode 100644 board/freescale/p1_p2_rdb/law.c create mode 100644 board/freescale/p1_p2_rdb/p1_p2_rdb.c create mode 100644 board/freescale/p1_p2_rdb/pci.c create mode 100644 board/freescale/p1_p2_rdb/tlb.c create mode 100644 board/freescale/p1_p2_rdb/u-boot.lds create mode 100644 doc/README.p2020rdb create mode 100644 include/configs/P1_P2_RDB.h
diff --git a/MAINTAINERS b/MAINTAINERS index 620604c..2596233 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -17,6 +17,10 @@ # Board CPU # #########################################################################
+Poonam Aggrwal poonam.aggrwal@freescale.com + + P2020RDB P2020 + Greg Allen gallen@arlut.utexas.edu
UTX8245 MPC8245 diff --git a/MAKEALL b/MAKEALL index dd0b761..af5058c 100755 --- a/MAKEALL +++ b/MAKEALL @@ -390,6 +390,7 @@ LIST_85xx=" \ MPC8572DS_36BIT \ P2020DS \ P2020DS_36BIT \ + P2020RDB \ PM854 \ PM856 \ sbc8540 \ diff --git a/Makefile b/Makefile index 9b36095..0c02304 100644 --- a/Makefile +++ b/Makefile @@ -2491,6 +2491,13 @@ P2020DS_config: unconfig fi @$(MKCONFIG) -a P2020DS ppc mpc85xx p2020ds freescale
+P2020RDB_config: unconfig + @mkdir -p $(obj)include + @echo "#define CONFIG_MP" >>$(obj)include/config.h ; + @$(XECHO) "... setting CONFIG_MP." ; + @echo "#define CONFIG_P2020" >>$(obj)include/config.h ; + @$(MKCONFIG) -a P1_P2_RDB ppc mpc85xx p1_p2_rdb freescale + PM854_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854
diff --git a/board/freescale/p1_p2_rdb/Makefile b/board/freescale/p1_p2_rdb/Makefile new file mode 100644 index 0000000..f952b46 --- /dev/null +++ b/board/freescale/p1_p2_rdb/Makefile @@ -0,0 +1,53 @@ +# +# Copyright 2009 Freescale Semiconductor, Inc. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-y += $(BOARD).o +COBJS-y += law.o +COBJS-y += tlb.o +COBJS-$(CONFIG_PCI) += pci.o +COBJS-y += ddr.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(OBJS) $(SOBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/p1_p2_rdb/config.mk b/board/freescale/p1_p2_rdb/config.mk new file mode 100644 index 0000000..56e3941 --- /dev/null +++ b/board/freescale/p1_p2_rdb/config.mk @@ -0,0 +1,32 @@ +# +# Copyright 2009 Freescale Semiconductor, Inc. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +#p1_p2rdb board +# + +ifndef TEXT_BASE +TEXT_BASE = 0xeff80000 +endif + +PLATFORM_CPPFLAGS += -DCONFIG_E500=1 +PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1 diff --git a/board/freescale/p1_p2_rdb/ddr.c b/board/freescale/p1_p2_rdb/ddr.c new file mode 100644 index 0000000..4efa277 --- /dev/null +++ b/board/freescale/p1_p2_rdb/ddr.c @@ -0,0 +1,189 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/mmu.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_ddr_sdram.h> +#include <asm/io.h> +#include <asm/fsl_law.h> + +extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, + unsigned int ctrl_num); + +#define DATARATE_400MHZ 400000000 +#define DATARATE_534MHZ 534000000 +#define DATARATE_667MHZ 667000000 +#define DATARATE_800MHZ 800000000 + +fsl_ddr_cfg_regs_t ddr_cfg_regs_400 = { + .cs[0].bnds = 0x0000003F, + .cs[0].config = 0x80014202, + .cs[0].config_2 = 0x00000000, + .timing_cfg_3 = 0x00010000, + .timing_cfg_0 = 0x00260802, + .timing_cfg_1 = 0x39355322, + .timing_cfg_2 = 0x1f9048ca, + .ddr_sdram_cfg = 0x43000000, + .ddr_sdram_cfg_2 = 0x24401000, + .ddr_sdram_mode = 0x00480432, + .ddr_sdram_mode_2 = 0x00000000, + .ddr_sdram_md_cntl = 0x00000000, + .ddr_sdram_interval = 0x06180100, + .ddr_data_init =0x00000000, + .ddr_sdram_clk_cntl = 0x02800000, + .ddr_init_addr = 0x00000000, + .ddr_init_ext_addr = 0x00000000, + .timing_cfg_4 = 0x00000000 , + .timing_cfg_5 = 0x00000000 , + .ddr_zq_cntl = 0x00000000, + .ddr_wrlvl_cntl = 0x00000000, + .ddr_pd_cntl = 0x00000000, + .ddr_sr_cntr = 0x00000000, + .ddr_sdram_rcw_1 = 0x00000000, + .ddr_sdram_rcw_2 = 0x00000000 +}; + +fsl_ddr_cfg_regs_t ddr_cfg_regs_533 = { + .cs[0].bnds = 0x0000003F, + .cs[0].config = 0x80014202, + .cs[0].config_2 = 0x00000000, + .timing_cfg_3 = 0x00020000, + .timing_cfg_0 = 0x00260802, + .timing_cfg_1 = 0x4c47c432, + .timing_cfg_2 = 0x0f9848ce, + .ddr_sdram_cfg = 0x43000000, + .ddr_sdram_cfg_2 = 0x24401000, + .ddr_sdram_mode = 0x00040642, + .ddr_sdram_mode_2 = 0x00000000, + .ddr_sdram_md_cntl = 0x00000000, + .ddr_sdram_interval = 0x08200100, + .ddr_data_init =0x00000000, + .ddr_sdram_clk_cntl = 0x02800000, + .ddr_init_addr = 0x00000000, + .ddr_init_ext_addr = 0x00000000, + .timing_cfg_4 = 0x00000000 , + .timing_cfg_5 = 0x00000000 , + .ddr_zq_cntl = 0x00000000, + .ddr_wrlvl_cntl = 0x00000000, + .ddr_pd_cntl = 0x00000000, + .ddr_sr_cntr = 0x00000000, + .ddr_sdram_rcw_1 = 0x00000000, + .ddr_sdram_rcw_2 = 0x00000000 +}; + +fsl_ddr_cfg_regs_t ddr_cfg_regs_667 = { + .cs[0].bnds = 0x0000003F, + .cs[0].config = 0x80014202, + .cs[0].config_2 = 0x00000000, + .timing_cfg_3 = 0x00030000, + .timing_cfg_0 = 0x55770802, + .timing_cfg_1 = 0x5f599543, + .timing_cfg_2 = 0x0fa074d1, + .ddr_sdram_cfg = 0x43000000, + .ddr_sdram_cfg_2 = 0x24401000, + .ddr_sdram_mode = 0x00040852, + .ddr_sdram_mode_2 = 0x00000000, + .ddr_sdram_md_cntl = 0x00000000, + .ddr_sdram_interval = 0x0a280100, + .ddr_data_init =0x00000000, + .ddr_sdram_clk_cntl = 0x02800000, + .ddr_init_addr = 0x00000000, + .ddr_init_ext_addr = 0x00000000, + .timing_cfg_4 = 0x00000000 , + .timing_cfg_5 = 0x00000000 , + .ddr_zq_cntl = 0x00000000, + .ddr_wrlvl_cntl = 0x00000000, + .ddr_pd_cntl = 0x00000000, + .ddr_sr_cntr = 0x00000000, + .ddr_sdram_rcw_1 = 0x00000000, + .ddr_sdram_rcw_2 = 0x00000000 +}; + +fsl_ddr_cfg_regs_t ddr_cfg_regs_800 = { + .cs[0].bnds = 0x0000003F, + .cs[0].config = 0x80014202, + .cs[0].config_2 = 0x00000000, + .timing_cfg_3 = 0x00040000, + .timing_cfg_0 = 0x55770802, + .timing_cfg_1 = 0x6f6b6543, + .timing_cfg_2 = 0x0fa074d1, + .ddr_sdram_cfg = 0x43000000, + .ddr_sdram_cfg_2 = 0x24401000, + .ddr_sdram_mode = 0x00440862, + .ddr_sdram_mode_2 = 0x00000000, + .ddr_sdram_md_cntl = 0x00000000, + .ddr_sdram_interval = 0x0a280100, + .ddr_data_init =0x00000000, + .ddr_sdram_clk_cntl = 0x02000000, + .ddr_init_addr = 0x00000000, + .ddr_init_ext_addr = 0x00000000, + .timing_cfg_4 = 0x00000000 , + .timing_cfg_5 = 0x00000000 , + .ddr_zq_cntl = 0x00000000, + .ddr_wrlvl_cntl = 0x00000000, + .ddr_pd_cntl = 0x00000000, + .ddr_sr_cntr = 0x00000000, + .ddr_sdram_rcw_1 = 0x00000000, + .ddr_sdram_rcw_2 = 0x00000000 +}; + +/* + * Fixed sdram init -- doesn't use serial presence detect. + */ + +phys_size_t fixed_sdram (void) +{ + volatile ccsr_ddr_t *ddr= (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR; + sys_info_t sysinfo; + char buf[32]; + phys_size_t dram_size; + + get_sys_info(&sysinfo); + printf("Configuring DDR for %s MT/s data rate\n", + strmhz(buf, sysinfo.freqDDRBus)); + + if(sysinfo.freqDDRBus <= DATARATE_400MHZ) + fsl_ddr_set_memctl_regs(&ddr_cfg_regs_800, 0); + else if(sysinfo.freqDDRBus <= DATARATE_534MHZ) + fsl_ddr_set_memctl_regs(&ddr_cfg_regs_800, 0); + else if(sysinfo.freqDDRBus <= DATARATE_667MHZ) + fsl_ddr_set_memctl_regs(&ddr_cfg_regs_800, 0); + else if(sysinfo.freqDDRBus <= DATARATE_800MHZ) + fsl_ddr_set_memctl_regs(&ddr_cfg_regs_800, 0); + + return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; +} + +phys_size_t initdram(int board_type) +{ + phys_size_t dram_size = 0; + + dram_size = fixed_sdram(); + set_ddr_laws(0, dram_size, LAW_TRGT_IF_DDR_1); + + dram_size = setup_ddr_tlbs(dram_size / 0x100000); + dram_size *= 0x100000; + + puts(" DDR: "); + return dram_size; +} diff --git a/board/freescale/p1_p2_rdb/law.c b/board/freescale/p1_p2_rdb/law.c new file mode 100644 index 0000000..61622dc --- /dev/null +++ b/board/freescale/p1_p2_rdb/law.c @@ -0,0 +1,37 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/mmu.h> + +struct law_entry law_table[] = { + SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_LBC), + SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_1), + SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1), + SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_2), + SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2), + SET_LAW(CONFIG_SYS_VSC7385_BASE_PHYS, LAW_SIZE_128K, LAW_TRGT_IF_LBC), + SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC), +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/p1_p2_rdb/p1_p2_rdb.c b/board/freescale/p1_p2_rdb/p1_p2_rdb.c new file mode 100644 index 0000000..ac2c8ff --- /dev/null +++ b/board/freescale/p1_p2_rdb/p1_p2_rdb.c @@ -0,0 +1,228 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <asm/processor.h> +#include <asm/mmu.h> +#include <asm/cache.h> +#include <asm/immap_85xx.h> +#include <asm/io.h> +#include <miiphy.h> +#include <libfdt.h> +#include <fdt_support.h> +#include <tsec.h> +#include <vsc7385.h> +#include <netdev.h> + + +#define GPIO_DIR 0x060f0000 +#define BOARD_PERI_RST 0x020f0000 +#define USB_RST 0x08000000 + +#define SYSCLK_MASK 0x00200000 +#define BOARDREV_MASK 0x10100000 +#define BOARDREV_B 0x10100000 +#define BOARDREV_C 0x00100000 + +#define SYSCLK_66 66666666 +#define SYSCLK_50 50000000 +#define SYSCLK_100 100000000 +DECLARE_GLOBAL_DATA_PTR; + +unsigned long get_board_sys_clk(ulong dummy) +{ + volatile ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); + u32 val, sysclk, temp; + + val = pgpio->gpdat; + sysclk = val & SYSCLK_MASK; + temp = val & BOARDREV_MASK; + if (temp == BOARDREV_C) { + if(sysclk == 0) + return SYSCLK_66; + else + return SYSCLK_100; + } else if (temp == BOARDREV_B) { + if(sysclk == 0) + return SYSCLK_66; + else + return SYSCLK_50; + } + return 0; +} + +#ifdef CONFIG_MMC +int board_early_init_f (void) +{ + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + + setbits_be32(&gur->pmuxcr, + (MPC85xx_PMUXCR_SDHC_CD | + MPC85xx_PMUXCR_SDHC_WP)); + return 0; +} +#endif + +int checkboard (void) +{ + u32 val, temp; + volatile ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); + char board_rev = 0; + struct cpu_type *cpu; + + val = pgpio->gpdat; + temp = val & BOARDREV_MASK; + if (temp == BOARDREV_C) + board_rev = 'C'; + else if (temp == BOARDREV_B) + board_rev = 'B'; + else + panic ("!!Unexpected Board REV detected!!\n"); + + cpu = gd->cpu; + printf ("Board: %sRDB Rev%c, System ID: 0x%02x, " + "System Version: 0x%02x\n", cpu->name, + board_rev, 0, 0); + +/* Bringing the following peripherals out of reset via GPIOs + * 0= reset and 1= out of reset + * GPIO12 - Reset to Ethernet Switch + * GPIO13 - Reset to SLIC/SLAC devices + * GPIO14 - Reset to SGMII_PHY_N + * GPIO15 - Reset to PCIe slots + * GPIO6 - Reset to RGMII PHY + * GPIO5 - Reset to USB3300 devices 1= reset and 0= out of reset + */ + val = pgpio->gpdir; + val |= GPIO_DIR; + setbits_be32(&pgpio->gpdir, GPIO_DIR); + + val = pgpio->gpdat; + clrsetbits_be32(&pgpio->gpdat, USB_RST, BOARD_PERI_RST); + + return 0; +} + +int board_early_init_r(void) +{ + const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; + const u8 flash_esel = 2; + + /* + * Remap Boot flash region to caching-inhibited + * so that flash can be erased properly. + */ + + /* Flush d-cache and invalidate i-cache of any FLASH data */ + flush_dcache(); + invalidate_icache(); + + /* invalidate existing TLB entry for flash */ + disable_tlb(flash_esel); + + set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, flash_esel, BOOKE_PAGESZ_16M, 1); + return 0; +} + + +#ifdef CONFIG_TSEC_ENET +int board_eth_init(bd_t *bis) +{ + struct tsec_info_struct tsec_info[4]; + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + int num = 0; + char *tmp; + unsigned int vscfw_addr; + +#ifdef CONFIG_TSEC1 + SET_STD_TSEC_INFO(tsec_info[num], 1); + num++; +#endif +#ifdef CONFIG_TSEC2 + SET_STD_TSEC_INFO(tsec_info[num], 2); + num++; +#endif +#ifdef CONFIG_TSEC3 + SET_STD_TSEC_INFO(tsec_info[num], 3); + if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS)) + tsec_info[num].flags |= TSEC_SGMII; + num++; +#endif + + if (!num) { + printf("No TSECs initialized\n"); + + return 0; + } + +#ifdef CONFIG_VSC7385_ENET +/* If a VSC7385 microcode image is present, then upload it. */ + if ((tmp = getenv ("vscfw_addr")) != NULL) { + vscfw_addr = simple_strtoul (tmp, NULL, 16); + printf("uploading VSC7385 microcode from %x\n", vscfw_addr); + if (vsc7385_upload_firmware((void *) vscfw_addr, + CONFIG_VSC7385_IMAGE_SIZE)) + puts("Failure uploading VSC7385 microcode.\n"); + } else + puts("No address specified for VSC7385 microcode.\n"); +#endif + + tsec_eth_init(bis, tsec_info, num); + + return pci_eth_init(bis); +} +#endif + +#ifdef CONFIG_PCI +extern void ft_pci_board_setup(void *blob); +#endif + +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ + phys_addr_t base; + phys_size_t size; + + ft_cpu_setup(blob, bd); + + base = getenv_bootm_low(); + size = getenv_bootm_size(); + + fdt_fixup_memory(blob, (u64)base, (u64)size); + +#ifdef CONFIG_PCI + ft_pci_board_setup(blob); +#endif +} +#endif + +#ifdef CONFIG_MP +extern void cpu_mp_lmb_reserve(struct lmb *lmb); + +void board_lmb_reserve(struct lmb *lmb) +{ + cpu_mp_lmb_reserve(lmb); +} +#endif diff --git a/board/freescale/p1_p2_rdb/pci.c b/board/freescale/p1_p2_rdb/pci.c new file mode 100644 index 0000000..614a0c4 --- /dev/null +++ b/board/freescale/p1_p2_rdb/pci.c @@ -0,0 +1,177 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <pci.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_pci.h> +#include <libfdt.h> +#include <fdt_support.h> + + +DECLARE_GLOBAL_DATA_PTR; + + +#ifdef CONFIG_PCIE1 +static struct pci_controller pcie1_hose; +#endif + +#ifdef CONFIG_PCIE2 +static struct pci_controller pcie2_hose; +#endif + +int first_free_busno=0; +void pci_init_board(void) +{ + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + uint devdisr = gur->devdisr; + uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; + uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16; + + volatile ccsr_fsl_pci_t *pci; + struct pci_controller *hose; + int pcie_ep, pcie_configured; + struct pci_region *r; + + debug (" pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n", + devdisr, io_sel, host_agent); + + if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS)) + printf (" eTSEC2 is in sgmii mode.\n"); + +#ifdef CONFIG_PCIE2 + pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR; + hose = &pcie2_hose; + pcie_ep = (host_agent == 2) || (host_agent == 4) || + (host_agent == 6) || (host_agent == 0); + pcie_configured = (io_sel == 0xE); + r = hose->regions; + + if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ + printf ("\n PCIE2 connected to Slot 1 as %s (base address %x)", + pcie_ep ? "End Point": "Root Complex", (uint)pci); + if (pci->pme_msg_det) { + pci->pme_msg_det = 0xffffffff; + debug (" with errors. Clearing. Now 0x%08x", + pci->pme_msg_det); + } + printf ("\n"); + + /* inbound */ + r += fsl_pci_setup_inbound_windows(r); + + /* outbound memory */ + pci_set_region(r++, + CONFIG_SYS_PCIE2_MEM_BUS, + CONFIG_SYS_PCIE2_MEM_PHYS, + CONFIG_SYS_PCIE2_MEM_SIZE, + PCI_REGION_MEM); + + /* outbound io */ + pci_set_region(r++, + CONFIG_SYS_PCIE2_IO_BUS, + CONFIG_SYS_PCIE2_IO_PHYS, + CONFIG_SYS_PCIE2_IO_SIZE, + PCI_REGION_IO); + + hose->region_count = r - hose->regions; + hose->first_busno=first_free_busno; + pci_setup_indirect(hose, (int) &pci->cfg_addr, + (int) &pci->cfg_data); + + fsl_pci_init(hose); + first_free_busno=hose->last_busno+1; + printf (" PCIE2 on bus %02x - %02x\n", + hose->first_busno,hose->last_busno); + + } else { + printf (" PCIE2: disabled\n"); + } +#else + gur->devdisr |= MPC85xx_DEVDISR_PCIE2; /* disable */ +#endif +#ifdef CONFIG_PCIE1 + pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR; + hose = &pcie1_hose; + pcie_ep = (host_agent <= 1) || (host_agent == 4) || + (host_agent == 5); + pcie_configured = (io_sel == 0xE); + r = hose->regions; + + if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ + printf ("\n PCIE1 connected to Slot 2 as %s (base address %x)", + pcie_ep ? "End Point" : "Root Complex", + (uint)pci); + if (pci->pme_msg_det) { + pci->pme_msg_det = 0xffffffff; + debug (" with errors. Clearing. Now 0x%08x", + pci->pme_msg_det); + } + printf ("\n"); + + /* inbound */ + r += fsl_pci_setup_inbound_windows(r); + + /* outbound memory */ + pci_set_region(r++, + CONFIG_SYS_PCIE1_MEM_BUS, + CONFIG_SYS_PCIE1_MEM_PHYS, + CONFIG_SYS_PCIE1_MEM_SIZE, + PCI_REGION_MEM); + + /* outbound io */ + pci_set_region(r++, + CONFIG_SYS_PCIE1_IO_BUS, + CONFIG_SYS_PCIE1_IO_PHYS, + CONFIG_SYS_PCIE1_IO_SIZE, + PCI_REGION_IO); + + hose->region_count = r - hose->regions; + hose->first_busno=first_free_busno; + + pci_setup_indirect(hose, (int)&pci->cfg_addr, + (int)&pci->cfg_data); + + fsl_pci_init(hose); + + first_free_busno=hose->last_busno+1; + printf(" PCIE1 on bus %02x - %02x\n", + hose->first_busno,hose->last_busno); + + } else { + printf (" PCIE1: disabled\n"); + } +#else + gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */ +#endif +} + +void ft_pci_board_setup(void *blob) +{ +#ifdef CONFIG_PCIE2 + ft_fsl_pci_setup(blob, "pci1", &pcie2_hose); +#endif +#ifdef CONFIG_PCIE1 + ft_fsl_pci_setup(blob, "pci2", &pcie1_hose); +#endif +} diff --git a/board/freescale/p1_p2_rdb/tlb.c b/board/freescale/p1_p2_rdb/tlb.c new file mode 100644 index 0000000..ca5a33c --- /dev/null +++ b/board/freescale/p1_p2_rdb/tlb.c @@ -0,0 +1,82 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/mmu.h> + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , + CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , + CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , + CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + + /* TLB 1 */ + /* *I*** - Covers boot page */ + SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I, + 0, 0, BOOKE_PAGESZ_4K, 1), + + /* *I*G* - CCSRBAR */ + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 1, BOOKE_PAGESZ_1M, 1), + + /* W**G* - Flash/promjet, localbus */ + /* This will be changed to *I*G* after relocation to RAM. */ + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, + 0, 2, BOOKE_PAGESZ_16M, 1), + + /* *I*G* - PCI */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE2_MEM_VIRT, CONFIG_SYS_PCIE2_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 3, BOOKE_PAGESZ_1G, 1), + + /* *I*G* - PCI I/O */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE2_IO_VIRT, CONFIG_SYS_PCIE2_IO_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 4, BOOKE_PAGESZ_256K, 1), + + /* *I*G - NAND */ + SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 5, BOOKE_PAGESZ_1M, 1), + + SET_TLB_ENTRY(1, CONFIG_SYS_VSC7385_BASE, CONFIG_SYS_VSC7385_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 6, BOOKE_PAGESZ_1M, 1), + +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/p1_p2_rdb/u-boot.lds b/board/freescale/p1_p2_rdb/u-boot.lds new file mode 100644 index 0000000..649ebf9 --- /dev/null +++ b/board/freescale/p1_p2_rdb/u-boot.lds @@ -0,0 +1,143 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +PHDRS +{ + text PT_LOAD; + bss PT_LOAD; +} + +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + *(.text) + *(.fixup) + *(.got1) + } :text + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.eh_frame) + *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) + } :text + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + .bootpg ADDR(.text) + 0x7f000 : + { + cpu/mpc85xx/start.o (.bootpg) + } :text = 0xffff + + .resetvec ADDR(.text) + 0x7fffc : + { + *(.resetvec) + } :text = 0xffff + + . = ADDR(.text) + 0x80000; + + __bss_start = .; + .bss (NOLOAD) : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } :bss + + . = ALIGN(4); + _end = . ; + PROVIDE (end = .); +} diff --git a/doc/README.p2020rdb b/doc/README.p2020rdb new file mode 100644 index 0000000..a9c807b --- /dev/null +++ b/doc/README.p2020rdb @@ -0,0 +1,143 @@ +Overview +-------- +P2020RDB is a Low End Dual core platform supporting the P2020 processor of QorIQ +series. + +Building U-boot +----------- +To build the u-boot for P2020RDB: + make P2020RDB_config + make + + +NOR Flash Banks +----------- +RDB board for P2020 has two flash banks. They are both present on boot. + +Booting by default is always from the boot bank at 0xef00_0000. + + +Memory Map +---------- +0xef00_0000 - 0xef7f_ffff Alernate bank 8MB +0xe800_0000 - 0xefff_ffff Boot bank 8MB + +0xef78_0000 - 0xef7f_ffff Alternate u-boot address 512KB +0xeff8_0000 - 0xefff_ffff Boot u-boot address 512KB + +Switch settings to boot from the NOR flash banks +------------------------------------------------ +SW4[8]=0 default NOR Flash bank +SW4[8]=1 Alternate NOR Flash bank + +Flashing Images +--------------- +To place a new u-boot image in the alternate flash bank and then reset with that + new image temporarily, use this: + tftp 1000000 u-boot.bin + erase ef780000 ef7fffff + cp.b 1000000 ef780000 80000 + +Now to boot from the alternate bank change the SW4[8] from 0 to 1. + +To program the image in the boot flash bank: + tftp 1000000 u-boot.bin + protect off all + erase eff80000 ffffffff + cp.b 1000000 eff80000 80000 + +Using the Device Tree Source File +--------------------------------- +To create the DTB (Device Tree Binary) image file, +use a command similar to this: + + dtc -b 0 -f -I dts -O dtb p2020rdb.dts > p2020rdb.dtb + +Likely, that .dts file will come from here; + + linux-2.6/arch/powerpc/boot/dts/p2020rdb.dts + + +Booting Linux +------------- + +Place a linux uImage in the TFTP disk area. + + tftp 1000000 uImage.p2020rdb + tftp 2000000 rootfs.ext2.gz.uboot + tftp c00000 p2020rdb.dtb + bootm 1000000 2000000 c00000 + + + +Implementing AMP(Asymmetric MultiProcessing) +--------------------------------------------- +1. Build kernel image for core0: + + a. $ make 85xx/p1_p2_rdb_defconfig + + b. $ make menuconfig + - un-select "Processor support"->"Symetric multi-processing support" + + c. $ make uImage + + d. $ cp arch/powerpc/boot/uImage /tftpboot/uImage.core0 + +2. Build kernel image for core1: + + a. $ make 85xx/p1_p2_rdb_defconfig + + b. $ make menuconfig + - Un-select "Processor support"->"Symetric multi-processing support" + - Select "Advanced setup" -> " Prompt for advanced kernel + configuration options" + - Select "Set physical address where the kernel is loaded" and + set it to 0x20000000, asssuming core1 will start from 512MB. + - Select "Set custom page offset address" + - Select "Set custom kernel base address" + - Select "Set maximum low memory" + - "Exit" and save the selection. + + c. $ make uImage + + d. $ cp arch/powerpc/boot/uImage /tftpboot/uImage.core1 + +3. Create dtb for core0: + + $ dtc -I dts -O dtb -f -b 0 arch/powerpc/boot/dts/p2020rdb_camp_core0.dts > /tftpboot/p2020rdb_camp_core0.dtb + +4. Create dtb for core1: + + $ dtc -I dts -O dtb -f -b 1 arch/powerpc/boot/dts/p2020rdb_camp_core1.dts > /tftpboot/p2020rdb_camp_core1.dtb + +5. Bring up two cores separately: + + a. Power on the board, under u-boot prompt: + => setenv <serverip> + => setenv <ipaddr> + => setenv bootargs root=/dev/ram rw console=ttyS0,115200 + b. Bring up core1's kernel first: + => setenv bootm_low 0x20000000 + => setenv bootm_size 0x10000000 + => tftp 21000000 uImage.core1 + => tftp 22000000 ramdiskfile + => tftp 20c00000 p2020rdb_camp_core1.dtb + => interrupts off + => bootm start 21000000 22000000 20c00000 + => bootm loados + => bootm ramdisk + => bootm fdt + => fdt boardsetup + => fdt chosen $initrd_start $initrd_end + => bootm prep + => cpu 1 release $bootm_low - $fdtaddr - + c. Bring up core0's kernel(on the same u-boot console): + => setenv bootm_low 0 + => setenv bootm_size 0x20000000 + => tftp 1000000 uImage.core0 + => tftp 2000000 ramdiskfile + => tftp c00000 p2020rdb_camp_core0.dtb + => bootm 1000000 2000000 c00000 + +Please note only core0 will run u-boot, core1 starts kernel directly after +"cpu release" command is issued. diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h new file mode 100644 index 0000000..cff2de6 --- /dev/null +++ b/include/configs/P1_P2_RDB.h @@ -0,0 +1,559 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * P1 P2 RDB board configuration file + * This file is intends to address a set of Low End and Ultra Low End + * Freescale SOCs of QorIQ series(RDB platforms). + * Currently only P2020RDB + * + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +/* High Level Configuration Options */ +#define CONFIG_BOOKE 1 /* BOOKE */ +#define CONFIG_E500 1 /* BOOKE e500 family */ +#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48/P1020/P2020,etc*/ +#define CONFIG_FSL_ELBC 1 /* Enable eLBC Support */ +#define CONFIG_PCI 1 /* Enable PCI/PCIE */ +#define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */ +#define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */ +#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ +#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ +#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ +#define CONFIG_FSL_LAW 1 /* Use common FSL init code */ +#define CONFIG_TSEC_ENET /* tsec ethernet support */ +#define CONFIG_ENV_OVERWRITE + + +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /*sysclk for P1_P2 RDB */ +#define CONFIG_DDR_CLK_FREQ 66666666 /* DDRCLK on P1_P2 RDB */ + +/* + * These can be toggled for performance analysis, otherwise use default. + */ +#define CONFIG_L2_CACHE /* toggle L2 cache */ +#define CONFIG_BTB /* toggle branch predition */ + +#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ + +#define CONFIG_ENABLE_36BIT_PHYS 1 + +#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x1fffffff +#define CONFIG_PANIC_HANG /* do not reset board on panic */ + +/* + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + */ +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ +#define CONFIG_SYS_CCSRBAR 0xffe00000 /* relocated CCSRBAR */ +#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of */ + /* CCSRBAR */ +#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses */ + /* CONFIG_SYS_IMMR */ + +#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) +#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) + +/* DDR Setup */ +#define CONFIG_FSL_DDR2 +#undef CONFIG_FSL_DDR_INTERACTIVE +#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ +#undef CONFIG_DDR_DLL + +#define CONFIG_MEM_INIT_VALUE 0xDeadBeef + +#define CONFIG_SYS_SDRAM_SIZE 1024 /* DDR size on P1_P2 RDBs */ +#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE + +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL 1 + +#define CONFIG_SYS_DDR_ERR_INT_EN 0x0000000d +#define CONFIG_SYS_DDR_ERR_DIS 0x00000000 +#define CONFIG_SYS_DDR_SBE 0x00FF0000 + +#define CONFIG_SYS_DDR_TLB_START 9 + +/* + * Memory map + * + * 0x0000_0000 0x3fff_ffff DDR 1G cacheablen + * 0xa000_0000 0xbfff_ffff PCI Express Mem 1G non-cacheable + * 0xffc2_0000 0xffc5_ffff PCI IO range 256K non-cacheable + * + * Localbus cacheable (TBD) + * 0xXXXX_XXXX 0xXXXX_XXXX SRAM YZ M Cacheable + * + * Localbus non-cacheable + * 0xef00_0000 0xefff_ffff FLASH 16M non-cacheable + * 0xffa0_0000 0xffaf_ffff NAND 1M non-cacheable + * 0xffb0_0000 0xffbf_ffff VSC7385 switch 1M non-cacheable + * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 + * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable + */ + +/* + * Local Bus Definitions + */ +#define CONFIG_SYS_FLASH_BASE 0xef000000 /* start of FLASH 16M */ + +#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE + +#define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ + BR_PS_16 | BR_V) +#define CONFIG_FLASH_OR_PRELIM 0xff000ff7 + +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} +#define CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 128 /* sectors per device */ +#undef CONFIG_SYS_FLASH_CHECKSUM +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 + +#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ + + +#define CONFIG_SYS_INIT_RAM_LOCK 1 +#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ +#define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */ + +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END \ + - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon*/ +#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc*/ + +#define CONFIG_SYS_NAND_BASE 0xffa00000 +#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE +#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS 1 +#define CONFIG_MTD_NAND_VERIFY_WRITE +#define CONFIG_CMD_NAND 1 +#define CONFIG_NAND_FSL_ELBC 1 +#define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024) + +/* NAND flash config */ +#define CONFIG_NAND_BR_PRELIM (CONFIG_SYS_NAND_BASE_PHYS \ + | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ + | BR_PS_8 /* Port Size = 8 bit */ \ + | BR_MS_FCM /* MSEL = FCM */ \ + | BR_V) /* valid */ + +#define CONFIG_NAND_OR_PRELIM (0xFFF80000 /* length 32K */ \ + | OR_FCM_CSCT \ + | OR_FCM_CST \ + | OR_FCM_CHT \ + | OR_FCM_SCY_1 \ + | OR_FCM_TRLX \ + | OR_FCM_EHTR) + +#define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ +#define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ +#define CONFIG_SYS_BR1_PRELIM CONFIG_NAND_BR_PRELIM /* NAND Base Address */ +#define CONFIG_SYS_OR1_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ + +#define CONFIG_SYS_VSC7385_BASE 0xffb00000 + +#define CONFIG_SYS_VSC7385_BASE_PHYS CONFIG_SYS_VSC7385_BASE + +#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_VSC7385_BASE | BR_PS_8 | BR_V) +#define CONFIG_SYS_OR2_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | OR_GPCM_XACS | \ + OR_GPCM_SCY_15 | OR_GPCM_SETA | OR_GPCM_TRLX | \ + OR_GPCM_EHTR | OR_GPCM_EAD) + +/* Serial Port - controlled on board with jumper J8 + * open - index 2 + * shorted - index 1 + */ +#define CONFIG_CONS_INDEX 1 +//#define CONFIG_CONS_INDEX 2 +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) + +#define CONFIG_SERIAL_MULTI 1 /* Enable both serial ports */ +#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ + +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) + +/* Use the HUSH parser */ +#define CONFIG_SYS_HUSH_PARSER +#ifdef CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#endif + +/* + * Pass open firmware flat tree + */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 + +#define CONFIG_SYS_64BIT_VSPRINTF 1 +#define CONFIG_SYS_64BIT_STRTOUL 1 + +/* new uImage format support */ +#define CONFIG_FIT 1 +#define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ + +/* I2C */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_CMD_TREE +#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address*/ +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_NOPROBES {{0,0x29}} /* Don't probe these addrs */ +#define CONFIG_SYS_I2C_OFFSET 0x3000 +#define CONFIG_SYS_I2C2_OFFSET 0x3100 + +/* + * I2C2 EEPROM + */ +#define CONFIG_ID_EEPROM +#ifdef CONFIG_ID_EEPROM +#define CONFIG_SYS_I2C_EEPROM_NXID +#endif +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_EEPROM_BUS_NUM 1 + +#define CONFIG_RTC_DS1337 +#define CONFIG_SYS_I2C_RTC_ADDR 0x68 +/* + * General PCI + * Memory space is mapped 1-1, but I/O space must start from 0. + */ + +/* controller 2, Slot 2, tgtid 2, Base address 9000 */ +#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 +#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 +#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE2_IO_VIRT 0xffc20000 +#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE2_IO_PHYS 0xffc20000 +#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ + +/* controller 1, Slot 1, tgtid 1, Base address a000 */ +#define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 +#define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000 +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc30000 +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE1_IO_PHYS 0xffc30000 +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ + +#if defined(CONFIG_PCI) +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + +#undef CONFIG_EEPRO100 +#undef CONFIG_TULIP +#undef CONFIG_RTL8139 + +#ifdef CONFIG_RTL8139 +/* This macro is used by RTL8139 but not defined in PPC architecture */ +#define KSEG1ADDR(x) (x) +#define _IO_BASE 0x00000000 +#endif + + +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CONFIG_DOS_PARTITION + +#endif /* CONFIG_PCI */ + +/************************************************************ + * USB support + ************************************************************/ + +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_FSL +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET + +#if defined(CONFIG_TSEC_ENET) + +#ifndef CONFIG_NET_MULTI +#define CONFIG_NET_MULTI 1 +#endif + +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "eTSEC1" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "eTSEC2" +#define CONFIG_TSEC3 1 +#define CONFIG_TSEC3_NAME "eTSEC3" + +#define TSEC1_PHY_ADDR 2 +#define TSEC2_PHY_ADDR 0 +#define TSEC3_PHY_ADDR 1 + +#define CONFIG_VSC7385_ENET + +#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) + +#define TSEC1_PHYIDX 0 +#define TSEC2_PHYIDX 0 +#define TSEC3_PHYIDX 0 + +/* Vitesse 7385 */ + +#ifdef CONFIG_VSC7385_ENET +/* The size of the VSC7385 firmware image */ +#define CONFIG_VSC7385_IMAGE_SIZE 8192 +#endif + +#define CONFIG_ETHPRIME "eTSEC1" + +#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ +#endif /* CONFIG_TSEC_ENET */ + +/* + * Environment + */ +#define CONFIG_ENV_IS_IN_FLASH 1 +#if CONFIG_SYS_MONITOR_BASE > 0xfff80000 +#define CONFIG_ENV_ADDR 0xfff80000 +#else +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#endif +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_DATE +#define CONFIG_CMD_ELF +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_SETEXPR + +#if defined(CONFIG_PCI) +#define CONFIG_CMD_PCI +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_NET +#endif + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +#define CONFIG_MMC 1 + +#ifdef CONFIG_MMC +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#ifdef CONFIG_P2020 +#define CONFIG_SYS_FSL_ESDHC_USE_PIO /* P2020 eSDHC DMA is not functional*/ +#endif +#endif +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) + /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 16 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (16 << 20)/* Initial Memory map for Linux*/ + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ + +#if defined(CONFIG_TSEC_ENET) +#define CONFIG_HAS_ETH0 +#define CONFIG_HAS_ETH1 +#define CONFIG_HAS_ETH2 +#endif + +#define CONFIG_HOSTNAME unknown +#define CONFIG_ROOTPATH /opt/nfsroot +#define CONFIG_BOOTFILE uImage +#define CONFIG_UBOOTPATH u-boot.bin/* U-Boot image on TFTP server */ + +/* default location for tftp and bootm */ +#define CONFIG_LOADADDR 1000000 + +#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ +#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ + "loadaddr=1000000\0" \ + "bootfile=uImage\0" \ + "tftpflash=tftpboot $loadaddr $uboot; " \ + "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ + "erase " MK_STR(TEXT_BASE) " +$filesize; " \ + "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ + "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ + "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=rootfs.ext2.gz.uboot\0" \ + "fdtaddr=c00000\0" \ + "fdtfile=p2020rdb.dtb\0" \ + "bdev=sda1\0" \ + "jffs2nor=mtdblock3\0" \ + "norbootaddr=ef080000\0" \ + "norfdtaddr=ef040000\0" \ + "jffs2nand=mtdblock9\0" \ + "nandbootaddr=100000\0" \ + "nandfdtaddr=80000\0" \ + "nandimgsize=400000\0" \ + "nandfdtsize=80000\0" \ + "usb_phy_type=ulpi\0" \ + "vscfw_addr=ef000000\0" \ + "othbootargs=ramdisk_size=600000\0" \ + "usbfatboot=setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs; " \ + "usb start;" \ + "fatload usb 0:2 $loadaddr $bootfile;" \ + "fatload usb 0:2 $fdtaddr $fdtfile;" \ + "fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ + "usbext2boot=setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs; " \ + "usb start;" \ + "ext2load usb 0:4 $loadaddr $bootfile;" \ + "ext2load usb 0:4 $fdtaddr $fdtfile;" \ + "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ + "norboot=setenv bootargs root=/dev/$jffs2nor rw " \ + "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;" \ + "bootm $norbootaddr - $norfdtaddr\0" \ + "nandboot=setenv bootargs root=/dev/$jffs2nand rw rootfstype=jffs2 " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "nand read 2000000 $nandbootaddr $nandimgsize;" \ + "nand read 3000000 $nandfdtaddr $nandfdtsize;" \ + "bootm 2000000 - 3000000;\0" + + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_HDBOOT \ + "setenv bootargs root=/dev/$bdev rw rootdelay=30 " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "usb start;" \ + "ext2load usb 0:1 $loadaddr /boot/$bootfile;" \ + "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs; " \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND CONFIG_HDBOOT + +#endif /* __CONFIG_H */