On Wed, Feb 10, 2016 at 12:06 AM, Stefan Roese sr@denx.de wrote:
With commit a058052c [net: phy: do not read configuration register on reset], phy_reset() will clear the BMCR register. Resulting in bit 12 being cleared (A/N enable). This leads to autonegotiation link problems, at least on the Marvell Armada ClearFog board. I suspect that other boards using this driver will be affected as well.
At the of m88e1111s_config(), phy_reset() is called. This is not needed for the PHY to load the changed configuration, as phy_reset() is called a few lines before already. So lets call genphy_restart_aneg() here instead to start the AN correctly.
Tested on clearfog.
Signed-off-by: Stefan Roese sr@denx.de Cc: Stefan Agner stefan@agner.ch Cc: Hao Zhang hzhang@ti.com Cc: Michal Simek monstr@monstr.eu Cc: Andy Fleming afleming@gmail.com Cc: Joe Hershberger joe.hershberger@ni.com
Acked-by: Joe Hershberger joe.hershberger@ni.com