30 Apr
2015
30 Apr
'15
11:40 p.m.
On Thu, Apr 30, 2015 at 6:26 PM, Vagrant Cascadian vagrant@aikidev.net wrote:
Removing those options broke network boot. With this patch, u-boot reports:
Net: Phy 0 not found
And the dhcp command fails to get an ip address.
With both CONFIG_USB_HOST_ETHER and CONFIG_USB_ETHER_ASIX defined in mx6cuboxi.h, u-boot reports:
Net: FEC
And then the dhcp command works as expected...
Perhaps the CONFIG_USB*ETHER options conditionall enable some other feature that FEC depends on?
Could you try?
=> setenv ethaddr => save => reset
TFTP transfer is working fine here.
Regards,
Fabio Estevam