PXA25X chips don't support alternate settings so code in ether.c disables usage of CDC. But only code defined between DEV_CONFIG_CDC signals that network is up. This patch is fixing this bug by addding pxa_connect_gadget() which on pxa25x chips signals that network is up and do nothing on any other chips.
Signed-off-by: Łukasz Dałek luk0104@gmail.com --- drivers/usb/gadget/ether.c | 21 ++++++++++++++++++++- 1 files changed, 20 insertions(+), 1 deletions(-)
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index d975fb6..964fe2e 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -44,7 +44,12 @@ extern struct platform_data brd;
unsigned packet_received, packet_sent;
-#define DEV_CONFIG_CDC 1 +#ifdef CONFIG_USB_GADGET_PXA2XX +# undef DEV_CONFIG_CDC +# define DEV_CONFIG_SUBSET 1 +#else +# define DEV_CONFIG_CDC 1 +#endif #define GFP_ATOMIC ((gfp_t) 0) #define GFP_KERNEL ((gfp_t) 0)
@@ -864,7 +869,9 @@ static struct usb_gadget_strings stringtab = {
/*============================================================================*/ static u8 control_req[USB_BUFSIZ]; +#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS) static u8 status_req[STATUS_BYTECOUNT] __attribute__ ((aligned(4))); +#endif
/** @@ -1252,6 +1259,17 @@ static void rndis_command_complete(struct usb_ep *ep, struct usb_request *req)
#endif /* RNDIS */
+#ifdef CONFIG_USB_GADGET_PXA2XX +static inline void pxa_connect_gadget(void) +{ + debug("PXA connecting gadget...\n"); + l_ethdev.network_started = 1; + printf("USB network up!\n"); +} +#else +static inline void pxa_connect_gadget(void) { } +#endif + /* * The setup() callback implements all the ep0 functionality that's not * handled lower down. CDC has a number of less-common features: @@ -1352,6 +1370,7 @@ eth_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) if (gadget_is_pxa(gadget)) { value = eth_set_config(dev, DEV_CONFIG_VALUE, GFP_ATOMIC); + pxa_connect_gadget(); goto done_set_intf; }