On Wednesday, December 23, 2015 at 03:38:25 AM, Chin Liang See wrote:
On Wed, 2015-12-23 at 10:29 +0800, Chin Liang See wrote:
On Wed, 2015-12-23 at 03:27 +0100, Marek Vasut wrote:
On Wednesday, December 23, 2015 at 03:26:07 AM, 圣江 吴 wrote:
[..]
Hi Marek,
Pin mux settings has error, set EMACIO[1-8] [10-13] from 3 to 2, then usb works,
=> usb start starting USB... USB0: Core Release: 2.93a scanning bus 0 for devices... 2 USB Device(s) found => usb tree USB device tree: 1 Hub (480 Mb/s, 0mA)
U-Boot Root Hub
+-2 Mass Storage (480 Mb/s, 98mA) Generic USB Storage 000000000272
Cool, thanks! Patch please ;-)
Nice, guess Altera email is very slow
Yup, it work for me too with the pinmux change and dcache on.
U-Boot SPL 2016.01-rc2-09121-gc339ea5-dirty (Dec 23 2015 - 10:21:29) drivers/ddr/altera/sequencer.c: Preparing to start memory calibration drivers/ddr/altera/sequencer.c: CALIBRATION PASSED drivers/ddr/altera/sequencer.c: Calibration complete Trying to boot from MMC spl: mmc boot mode: raw
U-Boot 2016.01-rc2-09121-gc339ea5-dirty (Dec 23 2015 - 10:21:29 +0800)
CPU: Altera SoCFPGA Platform FPGA: Altera Cyclone V, SE/A6 or SX/C6 or ST/D6, version 0x0 BOOT: SD/MMC External Transceiver (1.8V) Watchdog enabled I2C: ready DRAM: 1 GiB MMC: dwmmc0@ff704000: 0 *** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial Model: Altera SOCFPGA Cyclone V SoC Development Kit Net: Error: ethernet@ff702000 address not set. No ethernet found. Hit any key to stop autoboot: 0 => dcache Data (writethrough) Cache is ON => usb reset resetting USB... USB0: Core Release: 2.93a scanning bus 0 for devices... 2 USB Device(s) found => usb info 1: Hub, USB Revision 1.10
- U-Boot Root Hub
- Class: Hub
- PacketSize: 8 Configurations: 1
- Vendor: 0x0000 Product 0x0000 Version 0.0 Configuration: 1
- Interfaces: 1 Self Powered 0mA Interface: 0
- Alternate Setting 0, Endpoints: 1
- Class Hub
- Endpoint 1 In Interrupt MaxPacket 2 Interval 255ms
2: Mass Storage, USB Revision 2.0
USB DISK 2.0 0781076602A6- Class: (from Interface) Mass Storage
- PacketSize: 64 Configurations: 1
- Vendor: 0x13fe Product 0x1e00 Version 1.16 Configuration: 1
- Interfaces: 1 Bus Powered 200mA Interface: 0
- Alternate Setting 0, Endpoints: 2
- Class Mass Storage, Transp. SCSI, Bulk only
- Endpoint 1 In Bulk MaxPacket 512
- Endpoint 2 Out Bulk MaxPacket 512
Cool, I will pick the patch shortly.