These are some improvements that were stuck in my tree for a while, time to expunge them, please consider applying.
Tested on: * DENX M28EVK v2.0 * DENX M28EVK v1.1 * Mysterious board #1 ... * Unnamed board #2 ...
Marek Vasut (13): FEC: Abstract out register setup M28EVK: Implement support for new board V2.0 M28EVK: Add SD update command i.MX28: Improve passing of data from SPL to U-Boot i.MX28: Implement boot pads sampling and reporting i.MX28: Add LCDIF register definitions i.MX28: Shut down the LCD controller before reset i.MX28: Add LRADC register definitions i.MX28: Add LRADC init to i.MX28 SPL i.MX28: Reorder battery status functions in SPL i.MX28: Add battery boot components to SPL i.MX28: Check if WP detection is implemented at all i.MX28: Avoid redefining serial_put[cs]()
arch/arm/cpu/arm926ejs/mx28/Makefile | 2 +- arch/arm/cpu/arm926ejs/mx28/mx28.c | 29 +- arch/arm/cpu/arm926ejs/mx28/mx28_init.h | 4 + arch/arm/cpu/arm926ejs/mx28/spl_boot.c | 57 ++++ arch/arm/cpu/arm926ejs/mx28/spl_lradc_init.c | 86 ++++++ arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c | 10 +- arch/arm/cpu/arm926ejs/mx28/spl_power_init.c | 224 ++++++++++----- arch/arm/include/asm/arch-mx28/imx-regs.h | 2 + arch/arm/include/asm/arch-mx28/regs-lcdif.h | 212 ++++++++++++++ arch/arm/include/asm/arch-mx28/regs-lradc.h | 400 ++++++++++++++++++++++++++ arch/arm/include/asm/arch-mx28/sys_proto.h | 30 ++ board/denx/m28evk/m28evk.c | 20 +- board/denx/m28evk/spl_boot.c | 8 +- drivers/mmc/mxsmmc.c | 3 +- drivers/net/fec_mxc.c | 84 +++--- include/configs/m28evk.h | 10 + include/configs/mx28evk.h | 1 + 17 files changed, 1043 insertions(+), 139 deletions(-) create mode 100644 arch/arm/cpu/arm926ejs/mx28/spl_lradc_init.c create mode 100644 arch/arm/include/asm/arch-mx28/regs-lcdif.h create mode 100644 arch/arm/include/asm/arch-mx28/regs-lradc.h
Cc: Detlev Zundel dzu@denx.de Cc: Fabio Estevam fabio.estevam@freescale.com Cc: Stefano Babic sbabic@denxde Cc: Wolfgang Denk wd@denx.de