After moving the KM specific configurations to Kconfig, the associated preprocessor definitions can now be removed in the headers. Moreover, the whitelist has been adapted correspondingly.
Signed-off-by: Pascal Linder pascal.linder@edu.hefr.ch Signed-off-by: Holger Brunck holger.brunck@ch.abb.com --- board/keymile/common/common.h | 4 ---- include/configs/km/keymile-common.h | 6 ------ include/configs/km/km-mpc83xx.h | 4 ---- include/configs/km/km-powerpc.h | 13 ------------- include/configs/km/km_arm.h | 22 ---------------------- include/configs/km/kmp204x-common.h | 15 --------------- include/configs/km_kirkwood.h | 22 ---------------------- include/configs/kmvect1.h | 5 ----- scripts/config_whitelist.txt | 18 ------------------ 9 files changed, 109 deletions(-)
diff --git a/board/keymile/common/common.h b/board/keymile/common/common.h index 859d9130a9..42b760dc6e 100644 --- a/board/keymile/common/common.h +++ b/board/keymile/common/common.h @@ -120,10 +120,6 @@ struct bfticu_iomap { u8 pb_dbug; };
-#if !defined(CONFIG_PIGGY_MAC_ADRESS_OFFSET) -#define CONFIG_PIGGY_MAC_ADRESS_OFFSET 0 -#endif - int ethernet_present(void); int ivm_read_eeprom(unsigned char *buf, int len); int ivm_analyze_eeprom(unsigned char *buf, int len); diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h index a83782e1cf..3106ef1d8c 100644 --- a/include/configs/km/keymile-common.h +++ b/include/configs/km/keymile-common.h @@ -27,12 +27,6 @@ #define CONFIG_LOADS_ECHO #define CONFIG_SYS_LOADS_BAUD_CHANGE
- -/* Support the IVM EEprom */ -#define CONFIG_SYS_IVM_EEPROM_ADR 0x50 -#define CONFIG_SYS_IVM_EEPROM_MAX_LEN 0x400 -#define CONFIG_SYS_IVM_EEPROM_PAGE_LEN 0x100 - /* * BOOTP options */ diff --git a/include/configs/km/km-mpc83xx.h b/include/configs/km/km-mpc83xx.h index 455e5236de..c06143c68b 100644 --- a/include/configs/km/km-mpc83xx.h +++ b/include/configs/km/km-mpc83xx.h @@ -3,8 +3,6 @@ */ #define BOOTFLASH_START 0xF0000000
-#define CONFIG_KM_CONSOLE_TTY "ttyS0" - /* * DDR Setup */ @@ -89,8 +87,6 @@ {0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \ {1, {I2C_NULL_HOP} } }
-#define CONFIG_KM_IVM_BUS 2 /* I2C2 (Mux-Port 1)*/ - #if defined(CONFIG_CMD_NAND) #define CONFIG_NAND_KMETER1 #define CONFIG_SYS_MAX_NAND_DEVICE 1 diff --git a/include/configs/km/km-powerpc.h b/include/configs/km/km-powerpc.h index 74cd67456c..20b596f541 100644 --- a/include/configs/km/km-powerpc.h +++ b/include/configs/km/km-powerpc.h @@ -11,9 +11,6 @@
#define CONFIG_JFFS2_CMDLINE
-/* standard km ethernet_present for piggy */ -#define CONFIG_KM_COMMON_ETH_INIT 1 - /* EEprom support 24C08, 24C16, 24C64 */ #define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 /* 8 Byte write page */ @@ -45,20 +42,10 @@
/* size of rootfs in RAM */ #define CONFIG_KM_ROOTFSSIZE 0x0 -/* pseudo-non volatile RAM [hex] */ -#define CONFIG_KM_PNVRAM 0x80000 -/* physical RAM MTD size [hex] */ -#define CONFIG_KM_PHRAM 0x100000 -/* resereved pram area at the end of memroy [hex] */ -#define CONFIG_KM_RESERVED_PRAM 0x0 /* set the default PRAM value to at least PNVRAM + PHRAM when pram env variable * is not valid yet, which is the case for when u-boot copies itself to RAM */ #define CONFIG_PRAM ((CONFIG_KM_PNVRAM + CONFIG_KM_PHRAM)>>10)
-#define CONFIG_KM_CRAMFS_ADDR 0xC00000 -#define CONFIG_KM_KERNEL_ADDR 0x400000 /* 7680Kbytes */ -#define CONFIG_KM_FDT_ADDR 0xB80000 /* 512Kbytes */ - /* architecture specific default bootargs */ #define CONFIG_KM_DEF_BOOT_ARGS_CPU ""
diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h index 5df507bddf..d4a6a6357c 100644 --- a/include/configs/km/km_arm.h +++ b/include/configs/km/km_arm.h @@ -41,15 +41,6 @@ #define CONFIG_SYS_MEMTEST_END 0x007fffff /*(_8M -1) */ #define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
-/* pseudo-non volatile RAM [hex] */ -#define CONFIG_KM_PNVRAM 0x80000 -/* physical RAM MTD size [hex] */ -#define CONFIG_KM_PHRAM 0x17F000 - -#define CONFIG_KM_CRAMFS_ADDR 0x2400000 -#define CONFIG_KM_KERNEL_ADDR 0x2000000 /* 3098KBytes */ -#define CONFIG_KM_FDT_ADDR 0x23E0000 /* 128KBytes */ - /* architecture specific default bootargs */ #define CONFIG_KM_DEF_BOOT_ARGS_CPU \ "bootcountaddr=${bootcountaddr} ${mtdparts}" \ @@ -101,13 +92,6 @@
#define BOOTFLASH_START 0x0
-/* Kirkwood has two serial IF */ -#if (CONFIG_CONS_INDEX == 2) -#define CONFIG_KM_CONSOLE_TTY "ttyS1" -#else -#define CONFIG_KM_CONSOLE_TTY "ttyS0" -#endif - /* * Other required minimal configurations */ @@ -122,7 +106,6 @@ #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ #define CONFIG_PHY_BASE_ADR 0 #define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ -#define CONFIG_KM_COMMON_ETH_INIT 1 /* standard km ethernet_present for piggy */
/* * I2C related stuff @@ -244,11 +227,6 @@ int get_scl(void); #define CONFIG_SYS_SDRAM_BASE 0x00000000 /* Do early setups now in board_init_f() */
-/* - * resereved pram area at the end of memroy [hex] - * 8Mbytes for switch + 4Kbytes for bootcount - */ -#define CONFIG_KM_RESERVED_PRAM 0x801000 /* address for the bootcount (taken from end of RAM) */ #define BOOTCOUNT_ADDR (CONFIG_KM_RESERVED_PRAM)
diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h index 3eff38017f..421a03e580 100644 --- a/include/configs/km/kmp204x-common.h +++ b/include/configs/km/kmp204x-common.h @@ -113,21 +113,10 @@ unsigned long get_board_sys_clk(unsigned long dummy);
/* size of rootfs in RAM */ #define CONFIG_KM_ROOTFSSIZE 0x0 -/* pseudo-non volatile RAM [hex] */ -#define CONFIG_KM_PNVRAM 0x80000 -/* physical RAM MTD size [hex] */ -#define CONFIG_KM_PHRAM 0x100000 -/* reserved pram area at the end of memory [hex] - * u-boot reserves some memory for the MP boot page */ -#define CONFIG_KM_RESERVED_PRAM 0x1000 /* set the default PRAM value to at least PNVRAM + PHRAM when pram env variable * is not valid yet, which is the case for when u-boot copies itself to RAM */ #define CONFIG_PRAM ((CONFIG_KM_PNVRAM + CONFIG_KM_PHRAM)>>10)
-#define CONFIG_KM_CRAMFS_ADDR 0x2000000 -#define CONFIG_KM_KERNEL_ADDR 0x1000000 /* max kernel size 15.5Mbytes */ -#define CONFIG_KM_FDT_ADDR 0x1F80000 /* max dtb size 0.5Mbytes */ - /* * Local Bus Definitions */ @@ -217,8 +206,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
-#define CONFIG_KM_CONSOLE_TTY "ttyS0" - /* I2C */
#define CONFIG_SYS_I2C @@ -243,8 +230,6 @@ int get_sda(void); int get_scl(void); #endif
-#define CONFIG_KM_IVM_BUS 1 /* I2C1 (Mux-Port 1)*/ - /* * eSPI - Enhanced SPI */ diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h index d0324573b1..b679701424 100644 --- a/include/configs/km_kirkwood.h +++ b/include/configs/km_kirkwood.h @@ -24,13 +24,10 @@ #if defined(CONFIG_KM_KIRKWOOD) #define CONFIG_HOSTNAME "km_kirkwood" #define CONFIG_KM_DISABLE_PCIE -#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
/* KM_KIRKWOOD_PCI */ #elif defined(CONFIG_KM_KIRKWOOD_PCI) #define CONFIG_HOSTNAME "km_kirkwood_pci" -#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ -#define CONFIG_KM_FPGA_CONFIG 1 #define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048" #define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
@@ -40,11 +37,9 @@ #undef CONFIG_SYS_KWD_CONFIG #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg #define CONFIG_KM_DISABLE_PCIE -#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
/* KM_NUSA / KM_SUGP1 */ #elif defined(CONFIG_KM_NUSA) || defined(CONFIG_KM_SUGP1) -#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
# if defined(CONFIG_KM_NUSA) #define CONFIG_HOSTNAME "kmnusa" @@ -55,48 +50,31 @@
#undef CONFIG_SYS_KWD_CONFIG #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg -#define CONFIG_KM_ENV_IS_IN_SPI_NOR 1 -#define CONFIG_KM_FPGA_CONFIG 1 -#define CONFIG_KM_PIGGY4_88E6352 1 -#define CONFIG_MV88E6352_SWITCH 1 -#define CONFIG_KM_MVEXTSW_ADDR 0x10
/* KM_MGCOGE3UN */ #elif defined(CONFIG_KM_MGCOGE3UN) #define CONFIG_HOSTNAME "mgcoge3un" -#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ #undef CONFIG_SYS_KWD_CONFIG #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-memphis.cfg #define CONFIG_KM_BOARD_EXTRA_ENV "waitforne=true\0" -#define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3 #define CONFIG_KM_DISABLE_PCIE -#define CONFIG_KM_PIGGY4_88E6061 1
/* KMCOGE5UN */ #elif defined(CONFIG_KM_COGE5UN) -#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ #undef CONFIG_SYS_KWD_CONFIG #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg -#define CONFIG_KM_ENV_IS_IN_SPI_NOR 1 -#define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3 #define CONFIG_HOSTNAME "kmcoge5un" #define CONFIG_KM_DISABLE_PCIE -#define CONFIG_KM_PIGGY4_88E6352 1
/* KM_PORTL2 */ #elif defined(CONFIG_KM_PORTL2) #define CONFIG_HOSTNAME "portl2" -#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ -#define CONFIG_KM_PIGGY4_88E6061 1
/* KM_SUV31 */ #elif defined(CONFIG_KM_SUV31) -#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ #define CONFIG_HOSTNAME "kmsuv31" #undef CONFIG_SYS_KWD_CONFIG #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg -#define CONFIG_KM_ENV_IS_IN_SPI_NOR 1 -#define CONFIG_KM_FPGA_CONFIG 1 #define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048" #define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE #else diff --git a/include/configs/kmvect1.h b/include/configs/kmvect1.h index 3049521757..4a3064d87f 100644 --- a/include/configs/kmvect1.h +++ b/include/configs/kmvect1.h @@ -34,11 +34,6 @@ #define CONFIG_SYS_MAMR (MxMR_GPL_x4DIS | \ 0x0000c000 | \ MxMR_WLFx_2X) -/* - * QE UEC ethernet configuration - */ -#define CONFIG_MV88E6352_SWITCH 1 -#define CONFIG_KM_MVEXTSW_ADDR 0x10
/* ethernet port connected to simple switch 88e6122 (UEC0) */ #define CONFIG_UEC_ETH1 diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 4158928c18..5d54f12375 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -956,9 +956,6 @@ CONFIG_KMVECT1 CONFIG_KM_BOARD_EXTRA_ENV CONFIG_KM_BOARD_NAME CONFIG_KM_COGE5UN -CONFIG_KM_COMMON_ETH_INIT -CONFIG_KM_CONSOLE_TTY -CONFIG_KM_CRAMFS_ADDR CONFIG_KM_DEF_ARCH CONFIG_KM_DEF_BOOT_ARGS_CPU CONFIG_KM_DEF_ENV @@ -973,24 +970,13 @@ CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI CONFIG_KM_DISABLE_PCI CONFIG_KM_DISABLE_PCIE CONFIG_KM_ECC_MODE -CONFIG_KM_ENV_IS_IN_SPI_NOR -CONFIG_KM_FDT_ADDR -CONFIG_KM_FPGA_CONFIG -CONFIG_KM_IVM_BUS -CONFIG_KM_KERNEL_ADDR CONFIG_KM_KIRKWOOD CONFIG_KM_KIRKWOOD_128M16 CONFIG_KM_KIRKWOOD_PCI CONFIG_KM_MGCOGE3UN -CONFIG_KM_MVEXTSW_ADDR CONFIG_KM_NEW_ENV CONFIG_KM_NUSA -CONFIG_KM_PHRAM -CONFIG_KM_PIGGY4_88E6061 -CONFIG_KM_PIGGY4_88E6352 -CONFIG_KM_PNVRAM CONFIG_KM_PORTL2 -CONFIG_KM_RESERVED_PRAM CONFIG_KM_ROOTFSSIZE CONFIG_KM_SUGP1 CONFIG_KM_SUV31 @@ -1390,7 +1376,6 @@ CONFIG_PHY_M88E1111 CONFIG_PHY_MODE_NEED_CHANGE CONFIG_PHY_RESET CONFIG_PHY_RESET_DELAY -CONFIG_PIGGY_MAC_ADRESS_OFFSET CONFIG_PIXIS_BRDCFG0_SPI CONFIG_PIXIS_BRDCFG0_USB2 CONFIG_PIXIS_BRDCFG1_AUDCLK_11 @@ -3068,9 +3053,6 @@ CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_ISA_IO_OFFSET CONFIG_SYS_ISA_IO_STRIDE CONFIG_SYS_ISA_MEM -CONFIG_SYS_IVM_EEPROM_ADR -CONFIG_SYS_IVM_EEPROM_MAX_LEN -CONFIG_SYS_IVM_EEPROM_PAGE_LEN CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_JFFS2_FIRST_SECTOR CONFIG_SYS_JFFS2_MEM_NAND