Enable Ethernet support in the device tree and add the necessary MACPWR configuration. Also fix spacing in USB device tree nodes and add the relevant configuration options.
Signed-off-by: Samuel Holland samuel@sholland.org --- arch/arm/dts/sun50i-a64-orangepi-win.dts | 18 +++++++++++++++--- configs/orangepi_win_defconfig | 5 ++++- 2 files changed, 19 insertions(+), 4 deletions(-)
diff --git a/arch/arm/dts/sun50i-a64-orangepi-win.dts b/arch/arm/dts/sun50i-a64-orangepi-win.dts index cf76c35237..41bad328f0 100644 --- a/arch/arm/dts/sun50i-a64-orangepi-win.dts +++ b/arch/arm/dts/sun50i-a64-orangepi-win.dts @@ -67,7 +67,19 @@ };
&ehci1 { - status = "okay"; + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-mode = "rgmii"; + phy = <&phy1>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; };
&mmc0 { @@ -80,7 +92,7 @@ };
&ohci1 { - status = "okay"; + status = "okay"; };
&uart0 { @@ -90,5 +102,5 @@ };
&usbphy { - status = "okay"; + status = "okay"; }; diff --git a/configs/orangepi_win_defconfig b/configs/orangepi_win_defconfig index f9c3d4acf9..670c1868b2 100644 --- a/configs/orangepi_win_defconfig +++ b/configs/orangepi_win_defconfig @@ -1,7 +1,10 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y CONFIG_MACH_SUN50I=y -CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y +CONFIG_DRAM_ZQ=3881977 +CONFIG_MACPWR="PD14" +CONFIG_USB0_ID_DET="PH9" +CONFIG_USB1_VBUS_PIN="PD7" CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-orangepi-win" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y