1 Nov
2009
1 Nov
'09
8:39 a.m.
I'm trying to get u-boot running on a smdk2410-based board. I'm using openocd and jtag and am trying to load u-boot into ram as follows:
load_image u-boot.bin 0x33f80000
Which *seems* to work: 103668 bytes written at address 0x33f80000 downloaded 103668 byte in 0.500045s
I then try to run it by using resume 0x33f80000 but it doesn't seem that u-boot is executing. What am I doing wrong?