On Thu, Jun 10, 2021 at 02:00:00PM +0200, Marek Vasut wrote:
The spi_get_bus_and_cs() may be called on the same bus and chipselect with different frequency or mode. This is valid usecase, but the code fails to notify the controller of such a configuration change. Call spi_set_speed_mode() in case bus frequency or bus mode changed to let the controller update the configuration.
The problem can easily be triggered using the sspi command: => sspi 0:0@1000 => sspi 0:0@2000 Without this patch, both transfers happen at 1000 Hz. With this patch, the later transfer happens correctly at 2000 Hz.
Signed-off-by: Marek Vasut marex@denx.de Cc: Jagan Teki jagan@amarulasolutions.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com
Applied to u-boot/master, thanks!