在 2022/5/12 2:24, Pali Rohár 写道:
ecc.mode is set to 0 (aliased to NAND_ECC_NONE) either when function nand_scan_ident() has not selected ecc.mode or when it selected it to none ecc mode.
Distinguish between these two states by checking of node property "nand-ecc-mode" which function nand_scan_ident() uses for filling ecc.mode.
This change fixes usage of none ecc mode if it is specified in DTS file.
Fixes: c9ea9019c5aa ("mtd: rawnand: fsl_elbc: Use ECC configuration from device tree") Signed-off-by: Pali Rohár pali@kernel.org
powerpc: + ids8313 +===================== WARNING ====================== +This board does not use CONFIG_WDT (Driver Model +for DM watchdog). Please update the board to use +CONFIG_WDT before the v2019.10 release. Failure to +update by the deadline may result in board removal. +See doc/develop/driver-model/migration.rst for more info. +==================================================== +This board does not use CONFIG_DM_ETH (Driver Model +for Ethernet drivers). Please update the board to use +CONFIG_DM_ETH before the v2020.07 release. Failure to +This board does not use CONFIG_DM_I2C (Driver Model +for I2C drivers). Please update the board to use +CONFIG_DM_I2C before the v2022.04 release. Failure to +This board does not use CONFIG_DM_SERIAL (Driver Model +for Serial drivers). Please update the board to use +CONFIG_DM_SERIAL before the v2023.04 release. Failure to +powerpc-linux-ld.bfd: drivers/mtd/nand/raw/fsl_elbc_nand.o: in function `fsl_elbc_chip_init': +drivers/mtd/nand/raw/fsl_elbc_nand.c:749: undefined reference to `ofnode_read_string' +make[1]: *** [Makefile:1813: u-boot] Error 1 +make: *** [Makefile:177: sub-make] Error 2
Build fail.
Regards, Peng.
drivers/mtd/nand/raw/fsl_elbc_nand.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/raw/fsl_elbc_nand.c b/drivers/mtd/nand/raw/fsl_elbc_nand.c index b0e3eb607ed4..8e14739b3ee9 100644 --- a/drivers/mtd/nand/raw/fsl_elbc_nand.c +++ b/drivers/mtd/nand/raw/fsl_elbc_nand.c @@ -745,7 +745,8 @@ static int fsl_elbc_chip_init(int devnum, u8 *addr, struct udevice *dev) return ret;
/* If nand_scan_ident() has not selected ecc.mode, do it now */
- if (nand->ecc.mode == NAND_ECC_NONE) {
- if (nand->ecc.mode == 0 &&
!ofnode_read_string(nand->flash_node, "nand-ecc-mode")) {