Signed-off-by: Dennis Gilmore dennis@ausil.us --- include/configs/wandboard.h | 40 +++++++++++++++++++++++++++++++++++----- 1 file changed, 35 insertions(+), 5 deletions(-)
diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index e9c7e64..41c84ae 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -40,6 +40,9 @@ #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200
+/* enable generic distro config */ +#define DISTRO_DEFAULTS 1 + /* Command definition */ #include <config_cmd_default.h>
@@ -48,7 +51,6 @@ #define CONFIG_CMD_BMODE #define CONFIG_CMD_SETEXPR
-#define CONFIG_BOOTDELAY 5
#define CONFIG_SYS_MEMTEST_START 0x10000000 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M) @@ -65,6 +67,9 @@ #define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC #define CONFIG_BOUNCE_BUFFER + +#define CONFIG_BOOTDELAY 5 + #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION @@ -74,6 +79,11 @@ #define CONFIG_CMD_DHCP #define CONFIG_CMD_MII #define CONFIG_CMD_NET + +#define CONFIG_OF_LIBFDT +#define CONFIG_CMD_BOOTZ + +/* Ethernet Configuration */ #define CONFIG_FEC_MXC #define CONFIG_MII #define IMX_FEC_BASE ENET_BASE_ADDR @@ -113,8 +123,30 @@ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ - "fdt_addr=0x11000000\0" \ + "fdt_addr=0x11100000\0" \ + "fdt_addr_r=0x11200000\0" \ + "pxefile_addr_r=0x11300000\0" \ + "scr_addr_r=0x11400000\0" \ + "kernel_addr_r=0x11500000\0" \ + "ramdisk_addr_r=0x13500000\0" \ "boot_fdt=try\0" \ + "bootcmd_setup=mmc rescan\0" \ + "bootcmd_pxe=setenv bootfile "" ;dhcp; tftp ${fdt_addr} /dtb/${fdt_file}; pxe get; pxe boot\0" \ + "bootcmd_disk_scr=load ${boot_ifc} ${bootdevice} ${scr_addr_r} boot.scr && source ${scr_addr_r}\0" \ + "bootcmd_disk_sysboot1=setenv bootfile /boot/extlinux/extlinux.conf; sysboot ${boot_ifc} ${bootdevice} any\0" \ + "bootcmd_disk_sysboot2=setenv bootfile /extlinux/extlinux.conf; sysboot ${boot_ifc} ${bootdevice} any\0" \ + "bootcmd_disk_uenv=load ${boot_ifc} ${bootdevice} ${uenv_addr_r} uEnv.txt; env import -t ${uenv_addr_r} ${filesize}; run bootcmd_uenv\0" \ + "bootcmd_disk_kernel=load ${boot_ifc} ${bootdevice} ${kernel_addr_r} vmlinuz && load ${boot_ifc} ${bootdevice} ${ramdisk_addr_r} initrd.img && bootz ${kernel_addr_r} ${ramdisk_addr_r}:${filesize} ${fdt_addr}\0" \ + "bootcmd_disk=load ${boot_ifc} ${bootdevice} ${fdt_addr} /boot/dtb/${fdt_file}; load ${boot_ifc} ${bootdevice} ${fdt_addr} /dtb/${fdt_file};run bootcmd_disk_sysboot1; run bootcmd_disk_sysboot2; run bootcmd_disk_uenv; run bootcmd_disk_scr; run bootcmd_disk_kernel\0" \ + "bootcmd_sata=setenv boot_ifc scsi; scsi scan && run bootcmd_disk\0" \ + "bootcmd_mmc=setenv boot_ifc mmc; mmc rescan && run bootcmd_disk\0" \ + "bootcmd_default=run bootcmd_mmc; run bootcmd_sata; run bootcmd_pxe\0" \ + "localcmd=run bootcmd_mmc\0" \ + "bootdevice=0\0" \ + "bootargs=console=ttymxc0 root=LABEL=rootfs\0" \ + "bootdelay=2\0" \ + "bootretry=90\0" \ + "netretry=once\0" \ "ip_dyn=yes\0" \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ "mmcpart=1\0" \ @@ -183,6 +215,7 @@
#define CONFIG_BOOTCOMMAND \ "mmc dev ${mmcdev}; if mmc rescan; then " \ + "run bootcmd_default; " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ @@ -230,9 +263,6 @@ #define CONFIG_ENV_OFFSET (6 * 64 * 1024) #define CONFIG_SYS_MMC_ENV_DEV 0
-#define CONFIG_OF_LIBFDT -#define CONFIG_CMD_BOOTZ - #ifndef CONFIG_SYS_DCACHE_OFF #define CONFIG_CMD_CACHE #endif