Hallo,
... Yes, it's supported on used on multiple platforms. Although we still have a problem with the NPE-microcode in the current version. I have a patch for this in my queue.
I'm porting u-boot to a Moxa UC7420 box :-) As it is not yet working, it's fine to hear it should. For now the microcode seems to be uploaded (tried 2.3 and 2.4 version), the NET LED starts flickering, but U-Boot say something about NPE-B upload failed and no eth device found. Could the patch in the queue fix this problem? If it does, I'd like to test this patch, before I start to investigate the problem myself...
Back to your question: You seem to be missing the MII support in your board config file (CONFIG_MII). Best would be to "clone" your board config file from a known to be working version, like "ixdpg425.h" or "pdnb3.h".
I used the pdnb3 board as a template, and just copied the MII defines from there. Everthing compiles just fine. I asked myself, if the PHY addresses need to be adapted for each board?
Regards Carsten
____________ Virus checked by G DATA AntiVirusKit Version: AVK 17.5142 from 04.06.2007
____________ Virus checked by G DATA AntiVirus Version: AVK 17.5142 from 04.06.2007 Virus news: www.antiviruslab.com