From: Rob Herring rob.herring@calxeda.com
Add support for AHCI controllers that are not PCI based.
Signed-off-by: Rob Herring rob.herring@calxeda.com --- common/cmd_scsi.c | 6 +++- drivers/block/ahci.c | 70 +++++++++++++++++++++++++++++++++++++++++++------ include/ahci.h | 4 +++ include/scsi.h | 1 + 4 files changed, 70 insertions(+), 11 deletions(-)
diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c index be4fe74..25a8299 100644 --- a/common/cmd_scsi.c +++ b/common/cmd_scsi.c @@ -47,7 +47,8 @@ #define SCSI_DEV_ID 0x5288
#else -#error no scsi device defined +#define SCSI_VEND_ID 0 +#define SCSI_DEV_ID 0 #endif
@@ -174,7 +175,7 @@ removable: scsi_curr_dev = -1; }
- +#ifdef CONFIG_PCI void scsi_init(void) { int busdevfunc; @@ -192,6 +193,7 @@ void scsi_init(void) scsi_low_level_init(busdevfunc); scsi_scan(1); } +#endif
block_dev_desc_t * scsi_get_dev(int dev) { diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c index d431c5a..d12cb71 100644 --- a/drivers/block/ahci.c +++ b/drivers/block/ahci.c @@ -78,13 +78,15 @@ static int waiting_for_cmd_completed(volatile u8 *offset,
static int ahci_host_init(struct ahci_probe_ent *probe_ent) { +#ifdef CONFIG_PCI pci_dev_t pdev = probe_ent->dev; + u16 tmp16; + unsigned short vendor; +#endif volatile u8 *mmio = (volatile u8 *)probe_ent->mmio_base; u32 tmp, cap_save; - u16 tmp16; int i, j; volatile u8 *port_mmio; - unsigned short vendor;
cap_save = readl(mmio + HOST_CAP); cap_save &= ((1 << 28) | (1 << 17)); @@ -110,6 +112,7 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent) writel(cap_save, mmio + HOST_CAP); writel_with_flush(0xf, mmio + HOST_PORTS_IMPL);
+#ifdef CONFIG_PCI pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor);
if (vendor == PCI_VENDOR_ID_INTEL) { @@ -118,7 +121,7 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent) tmp16 |= 0xf; pci_write_config_word(pdev, 0x92, tmp16); } - +#endif probe_ent->cap = readl(mmio + HOST_CAP); probe_ent->port_map = readl(mmio + HOST_PORTS_IMPL); probe_ent->n_ports = (probe_ent->cap & 0x1f) + 1; @@ -183,22 +186,24 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent) writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL); tmp = readl(mmio + HOST_CTL); debug("HOST_CTL 0x%x\n", tmp); - +#ifdef CONFIG_PCI pci_read_config_word(pdev, PCI_COMMAND, &tmp16); tmp |= PCI_COMMAND_MASTER; pci_write_config_word(pdev, PCI_COMMAND, tmp16); - +#endif return 0; }
static void ahci_print_info(struct ahci_probe_ent *probe_ent) { +#ifdef CONFIG_PCI pci_dev_t pdev = probe_ent->dev; + u16 cc; +#endif volatile u8 *mmio = (volatile u8 *)probe_ent->mmio_base; u32 vers, cap, impl, speed; const char *speed_s; - u16 cc; const char *scc_s;
vers = readl(mmio + HOST_VERSION); @@ -212,7 +217,7 @@ static void ahci_print_info(struct ahci_probe_ent *probe_ent) speed_s = "3"; else speed_s = "?"; - +#ifdef CONFIG_PCI pci_read_config_word(pdev, 0x0a, &cc); if (cc == 0x0101) scc_s = "IDE"; @@ -222,7 +227,9 @@ static void ahci_print_info(struct ahci_probe_ent *probe_ent) scc_s = "RAID"; else scc_s = "unknown"; - +#else + scc_s = "SATA"; +#endif printf("AHCI %02x%02x.%02x%02x " "%u slots %u ports %s Gbps 0x%x impl %s mode\n", (vers >> 24) & 0xff, @@ -249,6 +256,7 @@ static void ahci_print_info(struct ahci_probe_ent *probe_ent) cap & (1 << 13) ? "part " : ""); }
+#ifdef CONFIG_PCI static int ahci_init_one(pci_dev_t pdev) { u16 vendor; @@ -291,7 +299,7 @@ static int ahci_init_one(pci_dev_t pdev) err_out: return rc; } - +#endif
#define MAX_DATA_BYTE_COUNT (4*1024*1024)
@@ -667,7 +675,9 @@ void scsi_low_level_init(int busdevfunc) int i; u32 linkmap;
+#ifdef CONFIG_PCI ahci_init_one(busdevfunc); +#endif
linkmap = probe_ent->link_port_map;
@@ -682,6 +692,48 @@ void scsi_low_level_init(int busdevfunc) } }
+int ahci_init(u32 base) +{ + int i, rc = 0; + u32 linkmap; + + memset(ataid, 0, sizeof(ataid)); + + probe_ent = malloc(sizeof(struct ahci_probe_ent)); + memset(probe_ent, 0, sizeof(struct ahci_probe_ent)); + + probe_ent->host_flags = ATA_FLAG_SATA + | ATA_FLAG_NO_LEGACY + | ATA_FLAG_MMIO + | ATA_FLAG_PIO_DMA + | ATA_FLAG_NO_ATAPI; + probe_ent->pio_mask = 0x1f; + probe_ent->udma_mask = 0x7f; /*Fixme,assume to support UDMA6 */ + + probe_ent->mmio_base = base; + + /* initialize adapter */ + rc = ahci_host_init(probe_ent); + if (rc) + goto err_out; + + ahci_print_info(probe_ent); + + linkmap = probe_ent->link_port_map; + + for (i = 0; i < CONFIG_SYS_SCSI_MAX_SCSI_ID; i++) { + if (((linkmap >> i) & 0x01)) { + if (ahci_port_start((u8) i)) { + printf("Can not start port %d\n", i); + continue; + } + ahci_set_feature((u8) i); + } + } +err_out: + return rc; +} +
void scsi_bus_reset(void) { diff --git a/include/ahci.h b/include/ahci.h index 0c6bbbd..c0a0a47 100644 --- a/include/ahci.h +++ b/include/ahci.h @@ -25,6 +25,8 @@ #ifndef _AHCI_H_ #define _AHCI_H_
+#include <pci.h> + #define AHCI_PCI_BAR 0x24 #define AHCI_MAX_SG 56 /* hardware max is 64K */ #define AHCI_CMD_SLOT_SZ 32 @@ -187,4 +189,6 @@ struct ahci_probe_ent { u32 link_port_map; /*linkup port map*/ };
+int ahci_init(u32 base); + #endif diff --git a/include/scsi.h b/include/scsi.h index aaafc9c..c52759c 100644 --- a/include/scsi.h +++ b/include/scsi.h @@ -185,6 +185,7 @@ void scsi_low_level_init(int busdevfunc); * functions residing inside cmd_scsi.c */ void scsi_init(void); +void scsi_scan(int mode);
#define SCSI_IDENTIFY 0xC0 /* not used */