Re: [PATCH v10 15/15] doc: board: ti: k3: Add J784S4 EVM and AM69 SK documentation

Hi Apurva

On 24/02/24 01:51, Apurva Nandan wrote:

TI K3 J784S4 and AM69 are new additions to the K3 SoC family. Add documentation about the J784S4 EVM and AM69 SK.

Signed-off-by: Dasnavis Sabiya sabiya.d@ti.com Signed-off-by: Apurva Nandan a-nandan@ti.com

---

board/ti/j784s4/MAINTAINERS | 1 + doc/board/ti/j784s4_evm.rst | 299 ++++++++++++++++++++++++++++++++++++ doc/board/ti/k3.rst | 1 + 3 files changed, 301 insertions(+) create mode 100644 doc/board/ti/j784s4_evm.rst

diff --git a/board/ti/j784s4/MAINTAINERS b/board/ti/j784s4/MAINTAINERS index 46f4ba5da96..b7605ff335b 100644 --- a/board/ti/j784s4/MAINTAINERS +++ b/board/ti/j784s4/MAINTAINERS @@ -10,6 +10,7 @@ F: arch/arm/dts/k3-j784s4-evm-u-boot.dtsi F: arch/arm/dts/k3-j784s4-r5-evm.dts F: arch/arm/dts/k3-j784s4-ddr.dtsi F: arch/arm/dts/k3-j784s4-ddr-evm-lp4-4266.dtsi +F: doc/board/ti/j784s4_evm.rst

AM69 SK BOARD M: Apurva Nandan a-nandan@ti.com diff --git a/doc/board/ti/j784s4_evm.rst b/doc/board/ti/j784s4_evm.rst new file mode 100644 index 00000000000..5c4bd2c927d --- /dev/null +++ b/doc/board/ti/j784s4_evm.rst @@ -0,0 +1,299 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause +.. sectionauthor:: Apurva Nandan a-nandan@ti.com

+J784S4 and AM69 Platforms +=========================

+Introduction +------------ +The J784S4 SoC belongs to the K3 Multicore SoC architecture +platform, providing advanced system integration in automotive, +ADAS and industrial applications requiring AI at the network edge. +This SoC extends the K3 Jacinto 7 family of SoCs with focus on +raising performance and integration while providing interfaces, +memory architecture and compute performance for multi-sensor, high +concurrency applications.

+The device is partitioned into three functional domains, each containing +specific processing cores and peripherals:

+1. Wake-up (WKUP) domain

• • ARM Cortex-M4F processor, runs TI Foundational Security (TIFS)

+2. Microcontroller (MCU) domain

• • Dual core ARM Cortex-R5F processor, runs device management

•  and SoC early boot
  

+3. MAIN domain

• • Two clusters of quad core 64-bit ARM Cortex-A72, runs HLOS
• • Dual core ARM Cortex-R5F processor used for RTOS applications
• • Four C7x DSPs used for Machine Learning applications.

+More info can be found in TRM: http://www.ti.com/lit/zip/spruj52

+Platform information:

+* https://www.ti.com/tool/J784S4XEVM +* https://www.ti.com/tool/SK-AM69

+Boot Flow +--------- +Below is the pictorial representation of boot flow:

+.. image:: img/boot_diagram_k3_current.svg

• :alt: K3 boot flow

+- On this platform, "TI Foundational Security" (TIFS) functions as the

• security enclave master. While "Device Manager" (DM), also known as the
• "TISCI server" in TI terminology, offers all the essential services.

+- As illustrated in the diagram above, R5 SPL manages power and clock

• services independently before handing over control to DM. The A72 or
• the C7x (Aux core) software components request TIFS/DM to handle
• security or device management services.

+Sources +-------

+.. include:: k3.rst

• :start-after: .. k3_rst_include_start_boot_sources
• :end-before: .. k3_rst_include_end_boot_sources

+Build procedure +--------------- +0. Setup the environment variables:

+.. include:: k3.rst

• :start-after: .. k3_rst_include_start_common_env_vars_desc
• :end-before: .. k3_rst_include_end_common_env_vars_desc

+.. include:: k3.rst

• :start-after: .. k3_rst_include_start_board_env_vars_desc
• :end-before: .. k3_rst_include_end_board_env_vars_desc

+Set the variables corresponding to this platform:

+.. include:: k3.rst

• :start-after: .. k3_rst_include_start_common_env_vars_defn
• :end-before: .. k3_rst_include_end_common_env_vars_defn

+.. code-block:: bash

• $ export UBOOT_CFG_CORTEXR=j784s4_evm_r5_defconfig
• $ export UBOOT_CFG_CORTEXA=j784s4_evm_a72_defconfig
• $ export TFA_BOARD=j784s4
• $ export TFA_EXTRA_ARGS="K3_USART=0x8"
• $ export OPTEE_PLATFORM=k3-j784s4
• $ export OPTEE_EXTRA_ARGS="CFG_CONSOLE_UART=0x8"

+.. j784s4_evm_rst_include_start_build_steps

+1. Trusted Firmware-A

+.. include:: k3.rst

• :start-after: .. k3_rst_include_start_build_steps_tfa
• :end-before: .. k3_rst_include_end_build_steps_tfa

+2. OP-TEE

+.. include:: k3.rst

• :start-after: .. k3_rst_include_start_build_steps_optee
• :end-before: .. k3_rst_include_end_build_steps_optee

+3. U-Boot

+.. _j784s4_evm_rst_u_boot_r5:

+* 3.1 R5

+.. include:: k3.rst

• :start-after: .. k3_rst_include_start_build_steps_spl_r5
• :end-before: .. k3_rst_include_end_build_steps_spl_r5

+.. _j784s4_evm_rst_u_boot_a72:

+* 3.2 A72

+.. include:: k3.rst

• :start-after: .. k3_rst_include_start_build_steps_uboot
• :end-before: .. k3_rst_include_end_build_steps_uboot

+.. j784s4_evm_rst_include_end_build_steps

+Target Images +------------- +In order to boot we need tiboot3.bin, tispl.bin and u-boot.img. Each SoC +variant (GP, HS-FS, HS-SE) requires a different source for these files.

• • GP
• • tiboot3-j784s4-gp-evm.bin from :ref:`step 3.1 <j784s4_evm_rst_u_boot_r5>`
• • tispl.bin_unsigned, u-boot.img_unsigned from :ref:`step 3.2 <j784s4_evm_rst_u_boot_a72>`
• • HS-FS
• • tiboot3-j784s4-hs-fs-evm.bin from :ref:`step 3.1 <j784s4_evm_rst_u_boot_r5>`
• • tispl.bin, u-boot.img from :ref:`step 3.2 <j784s4_evm_rst_u_boot_a72>`
• • HS-SE
• • tiboot3-j784s4-hs-evm.bin from :ref:`step 3.1 <j784s4_evm_rst_u_boot_r5>`
• • tispl.bin, u-boot.img from :ref:`step 3.2 <j784s4_evm_rst_u_boot_a72>`

+Image formats +-------------

+- tiboot3.bin

+.. image:: img/multi_cert_tiboot3.bin.svg

• :alt: tiboot3.bin format

+- tispl.bin

+.. image:: img/dm_tispl.bin.svg

• :alt: tispl.bin format

+R5 Memory Map +-------------

+.. list-table::

• :widths: 16 16 16
• :header-rows: 1
• • • Region

• - Start Address
  

• - End Address
  

• • • SPL

• - 0x41c00000
  

• - 0x41c40000
  

• • • EMPTY

• - 0x41c40000
  

• - 0x41c61f20
  

• • • STACK

• - 0x41c65f20
  

• - 0x41c61f20
  

• • • Global data

• - 0x41c65f20
  

• - 0x41c66000
  

• • • Heap

• - 0x41c66000
  

• - 0x41c76000
  

• • • BSS

• - 0x41c76000
  

• - 0x41c80000
  

• • • DM DATA

• - 0x41c80000
  

• - 0x41c84130
  

• • • EMPTY

• - 0x41c84130
  

• - 0x41cff9fc
  

• • • MCU Scratchpad

• - 0x41cff9fc
  

• - 0x41cffbfc
  

• • • ROM DATA

• - 0x41cffbfc
  

• - 0x41cfffff
  

+Switch Setting for Boot Mode +----------------------------

+Boot Mode pins provide means to select the boot mode and options before the +device is powered up. After every POR, they are the main source to populate +the Boot Parameter Tables.

+Boot Mode Pins for J784S4-EVM +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

+The following tables show some common boot modes used on J784S4 EVM platform. +More details can be found in the Technical Reference Manual: +http://www.ti.com/lit/zip/spruj52 under the `Boot Mode Pins` section.

+.. list-table:: J784S4 EVM Boot Modes

• :widths: 16 16 16
• :header-rows: 1
• • • Switch Label

• - SW11: 12345678
  

• - SW7: 12345678
  

• • • SD

• - 10000010
  

• - 00000000
  

• • • EMMC

• - 10000000
  

• - 01000000
  

• • • OSPI

• - 00000110
  

• - 01000000
  

• • • UART

• - 00000000
  

• - 01110000
  

+For SW7 and SW11, the switch state in the "ON" position = 1.

+Boot Mode Pins for AM69-SK +^^^^^^^^^^^^^^^^^^^^^^^^^^

+The following table show some common boot modes used on AM69-SK platform. +More details can be found in the User Guide for AM69-SK: +https://www.ti.com/lit/ug/spruj70/spruj70.pdf under the `Bootmode Settings` +section.

+.. list-table:: AM69 SK Boot Modes

• :widths: 16 16
• :header-rows: 1
• • • Switch Label

• - SW2: 1234
  

• • • SD

• - 0000
  

• • • EMMC

• - 0110
  

• • • UART

• - 1010
  

+For SW2, the switch state in the "ON" position = 1.

+Debugging U-Boot +----------------

+See :ref:`Common Debugging environment - OpenOCD<k3_rst_refer_openocd>`: for +detailed setup information.

+.. warning::

• **OpenOCD support since**: September 2023 (git master)
• Until the next stable release of OpenOCD is available in your development
• environment's distribution, it might be necessary to build OpenOCD `from the
• source https://github.com/openocd-org/openocd`_.

+Debugging U-Boot on J784S4-EVM and AM69-SK +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

+.. include:: k3.rst

• :start-after: .. k3_rst_include_start_openocd_connect_XDS110
• :end-before: .. k3_rst_include_end_openocd_connect_XDS110

+To start OpenOCD and connect to J784S4-EVM or AM69-SK board, use the +following.

+.. code-block:: bash

• openocd -f board/ti_j784s4evm.cfg

diff --git a/doc/board/ti/k3.rst b/doc/board/ti/k3.rst index 3c33efd2e38..15e1ed232bf 100644 --- a/doc/board/ti/k3.rst +++ b/doc/board/ti/k3.rst @@ -41,6 +41,7 @@ K3 Based SoCs ../beagle/j721e_beagleboneai64 j721e_evm j721s2_evm

• j784s4_evm

  Boot Flow Overview

Reviewed-by: Neha Malcom Francis n-francis@ti.com