This brings in the main SoC device tree used by the Broadcom Northstar chipset, i.e. BCM4709x and BCM5301x. This is taken from the latest Linux kernel.
Cc: Rafał Miłecki rafal@milecki.pl Signed-off-by: Linus Walleij linus.walleij@linaro.org --- arch/arm/dts/bcm5301x.dtsi | 581 ++++++++++++++++++++++++++++ include/dt-bindings/clock/bcm-nsp.h | 51 +++ 2 files changed, 632 insertions(+) create mode 100644 arch/arm/dts/bcm5301x.dtsi create mode 100644 include/dt-bindings/clock/bcm-nsp.h
diff --git a/arch/arm/dts/bcm5301x.dtsi b/arch/arm/dts/bcm5301x.dtsi new file mode 100644 index 000000000000..5fc1b847f4aa --- /dev/null +++ b/arch/arm/dts/bcm5301x.dtsi @@ -0,0 +1,581 @@ +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * Generic DTS part for all BCM53010, BCM53011, BCM53012, BCM53014, BCM53015, + * BCM53016, BCM53017, BCM53018, BCM4707, BCM4708 and BCM4709 SoCs + * + * Copyright 2013-2014 Hauke Mehrtens hauke@hauke-m.de + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include <dt-bindings/clock/bcm-nsp.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + + chipcommon-a-bus@18000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0x18000000 0x00001000>; + #address-cells = <1>; + #size-cells = <1>; + + uart0: serial@300 { + compatible = "ns16550"; + reg = <0x0300 0x100>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&iprocslow>; + status = "disabled"; + }; + + uart1: serial@400 { + compatible = "ns16550"; + reg = <0x0400 0x100>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&iprocslow>; + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_uart1>; + status = "disabled"; + }; + }; + + mpcore-bus@19000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0x19000000 0x00023000>; + #address-cells = <1>; + #size-cells = <1>; + + a9pll: arm_clk@0 { + #clock-cells = <0>; + compatible = "brcm,nsp-armpll"; + clocks = <&osc>; + reg = <0x00000 0x1000>; + }; + + scu@20000 { + compatible = "arm,cortex-a9-scu"; + reg = <0x20000 0x100>; + }; + + timer@20200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x20200 0x100>; + interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>; + clocks = <&periph_clk>; + }; + + timer@20600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x20600 0x20>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>; + clocks = <&periph_clk>; + }; + + watchdog@20620 { + compatible = "arm,cortex-a9-twd-wdt"; + reg = <0x20620 0x20>; + interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>; + clocks = <&periph_clk>; + }; + + gic: interrupt-controller@21000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x21000 0x1000>, + <0x20100 0x100>; + }; + + L2: cache-controller@22000 { + compatible = "arm,pl310-cache"; + reg = <0x22000 0x1000>; + cache-unified; + arm,shared-override; + prefetch-data = <1>; + prefetch-instr = <1>; + cache-level = <2>; + }; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + iprocmed: iprocmed { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>; + clock-div = <2>; + clock-mult = <1>; + }; + + iprocslow: iprocslow { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>; + clock-div = <4>; + clock-mult = <1>; + }; + + periph_clk: periph_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&a9pll>; + clock-div = <2>; + clock-mult = <1>; + }; + }; + + axi@18000000 { + compatible = "brcm,bus-axi"; + reg = <0x18000000 0x1000>; + ranges = <0x00000000 0x18000000 0x00100000>; + #address-cells = <1>; + #size-cells = <1>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0x000fffff 0xffff>; + interrupt-map = + /* ChipCommon */ + <0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + + /* Switch Register Access Block */ + <0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + + /* PCIe Controller 0 */ + <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + + /* PCIe Controller 1 */ + <0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + + /* PCIe Controller 2 */ + <0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + + /* USB 2.0 Controller */ + <0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, + + /* USB 3.0 Controller */ + <0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, + + /* Ethernet Controller 0 */ + <0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + + /* Ethernet Controller 1 */ + <0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + + /* Ethernet Controller 2 */ + <0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + + /* Ethernet Controller 3 */ + <0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + + /* NAND Controller */ + <0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, + <0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + + chipcommon: chipcommon@0 { + reg = <0x00000000 0x1000>; + + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcie0: pcie@12000 { + reg = <0x00012000 0x1000>; + }; + + pcie1: pcie@13000 { + reg = <0x00013000 0x1000>; + }; + + pcie2: pcie@14000 { + reg = <0x00014000 0x1000>; + }; + + usb2: usb2@21000 { + reg = <0x00021000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + interrupt-parent = <&gic>; + + ehci: usb@21000 { + #usb-cells = <0>; + + compatible = "generic-ehci"; + reg = <0x00021000 0x1000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb2_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + ehci_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + + ehci_port2: port@2 { + reg = <2>; + #trigger-source-cells = <0>; + }; + }; + + ohci: usb@22000 { + #usb-cells = <0>; + + compatible = "generic-ohci"; + reg = <0x00022000 0x1000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + ohci_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + + ohci_port2: port@2 { + reg = <2>; + #trigger-source-cells = <0>; + }; + }; + }; + + usb3: usb3@23000 { + reg = <0x00023000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + interrupt-parent = <&gic>; + + xhci: usb@23000 { + #usb-cells = <0>; + + compatible = "generic-xhci"; + reg = <0x00023000 0x1000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb3_phy>; + phy-names = "usb"; + + #address-cells = <1>; + #size-cells = <0>; + + xhci_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + }; + }; + + gmac0: ethernet@24000 { + reg = <0x24000 0x800>; + }; + + gmac1: ethernet@25000 { + reg = <0x25000 0x800>; + }; + + gmac2: ethernet@26000 { + reg = <0x26000 0x800>; + }; + + gmac3: ethernet@27000 { + reg = <0x27000 0x800>; + }; + }; + + pwm: pwm@18002000 { + compatible = "brcm,iproc-pwm"; + reg = <0x18002000 0x28>; + clocks = <&osc>; + #pwm-cells = <3>; + status = "disabled"; + }; + + mdio: mdio@18003000 { + compatible = "brcm,iproc-mdio"; + reg = <0x18003000 0x8>; + #size-cells = <0>; + #address-cells = <1>; + }; + + mdio-mux@18003000 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&mdio>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x18003000 0x4>; + mux-mask = <0x200>; + + mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + usb3_phy: usb3-phy@10 { + compatible = "brcm,ns-ax-usb3-phy"; + reg = <0x10>; + usb3-dmp-syscon = <&usb3_dmp>; + #phy-cells = <0>; + status = "disabled"; + }; + }; + }; + + usb3_dmp: syscon@18105000 { + reg = <0x18105000 0x1000>; + }; + + uart2: serial@18008000 { + compatible = "ns16550a"; + reg = <0x18008000 0x20>; + clocks = <&iprocslow>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + status = "disabled"; + }; + + i2c0: i2c@18009000 { + compatible = "brcm,iproc-i2c"; + reg = <0x18009000 0x50>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + status = "disabled"; + }; + + dmu-bus@1800c000 { + compatible = "simple-bus"; + ranges = <0 0x1800c000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + cru-bus@100 { + compatible = "brcm,ns-cru", "simple-mfd"; + reg = <0x100 0x1a4>; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + lcpll0: clock-controller@100 { + #clock-cells = <1>; + compatible = "brcm,nsp-lcpll0"; + reg = <0x100 0x14>; + clocks = <&osc>; + clock-output-names = "lcpll0", "pcie_phy", + "sdio", "ddr_phy"; + }; + + genpll: clock-controller@140 { + #clock-cells = <1>; + compatible = "brcm,nsp-genpll"; + reg = <0x140 0x24>; + clocks = <&osc>; + clock-output-names = "genpll", "phy", + "ethernetclk", + "usbclk", "iprocfast", + "sata1", "sata2"; + }; + + usb2_phy: phy@164 { + compatible = "brcm,ns-usb2-phy"; + reg = <0x164 0x4>; + brcm,syscon-clkset = <&cru_clkset>; + clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>; + clock-names = "phy-ref-clk"; + #phy-cells = <0>; + }; + + cru_clkset: syscon@180 { + compatible = "brcm,cru-clkset", "syscon"; + reg = <0x180 0x4>; + }; + + pinctrl: pinctrl@1c0 { + compatible = "brcm,bcm4708-pinmux"; + reg = <0x1c0 0x24>; + reg-names = "cru_gpio_control"; + + spi-pins { + groups = "spi_grp"; + function = "spi"; + }; + + pinmux_i2c: i2c-pins { + groups = "i2c_grp"; + function = "i2c"; + }; + + pinmux_pwm: pwm-pins { + groups = "pwm0_grp", "pwm1_grp", + "pwm2_grp", "pwm3_grp"; + function = "pwm"; + }; + + pinmux_uart1: uart1-pins { + groups = "uart1_grp"; + function = "uart1"; + }; + }; + + thermal: thermal@2c0 { + compatible = "brcm,ns-thermal"; + reg = <0x2c0 0x10>; + #thermal-sensor-cells = <0>; + }; + }; + }; + + srab: ethernet-switch@18007000 { + compatible = "brcm,bcm53011-srab", "brcm,bcm5301x-srab"; + reg = <0x18007000 0x1000>; + + status = "disabled"; + + /* ports are defined in board DTS */ + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + rng: rng@18004000 { + compatible = "brcm,bcm5301x-rng"; + reg = <0x18004000 0x14>; + }; + + nand_controller: nand-controller@18028000 { + compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand"; + reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>; + reg-names = "nand", "iproc-idm", "iproc-ext"; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + brcm,nand-has-wp; + }; + + spi@18029200 { + compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi"; + reg = <0x18029200 0x184>, + <0x18029000 0x124>, + <0x1811b408 0x004>, + <0x180293a0 0x01c>; + reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg"; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mspi_done", + "mspi_halted", + "spi_lr_fullness_reached", + "spi_lr_session_aborted", + "spi_lr_impatient", + "spi_lr_session_done", + "spi_lr_overread"; + clocks = <&iprocmed>; + clock-names = "iprocmed"; + num-cs = <2>; + #address-cells = <1>; + #size-cells = <0>; + + spi_nor: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + status = "disabled"; + + partitions { + compatible = "brcm,bcm947xx-cfe-partitions"; + }; + }; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + coefficients = <(-556) 418000>; + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + }; +}; diff --git a/include/dt-bindings/clock/bcm-nsp.h b/include/dt-bindings/clock/bcm-nsp.h new file mode 100644 index 000000000000..ad5827cde782 --- /dev/null +++ b/include/dt-bindings/clock/bcm-nsp.h @@ -0,0 +1,51 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2015 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _CLOCK_BCM_NSP_H +#define _CLOCK_BCM_NSP_H + +/* GENPLL clock channel ID */ +#define BCM_NSP_GENPLL 0 +#define BCM_NSP_GENPLL_PHY_CLK 1 +#define BCM_NSP_GENPLL_ENET_SW_CLK 2 +#define BCM_NSP_GENPLL_USB_PHY_REF_CLK 3 +#define BCM_NSP_GENPLL_IPROCFAST_CLK 4 +#define BCM_NSP_GENPLL_SATA1_CLK 5 +#define BCM_NSP_GENPLL_SATA2_CLK 6 + +/* LCPLL0 clock channel ID */ +#define BCM_NSP_LCPLL0 0 +#define BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK 1 +#define BCM_NSP_LCPLL0_SDIO_CLK 2 +#define BCM_NSP_LCPLL0_DDR_PHY_CLK 3 + +#endif /* _CLOCK_BCM_NSP_H */