Sync SoCFPGA Cyclone V development kit pinmux configuration with Rocketboard U-Boot v2013.01.01-114-g9381569 (ACDS14.1_REL_GSRD_PR).
NOTE: This change is useless until we get proper SPL support, at which point this will likely need further rework.
Signed-off-by: Marek Vasut marex@denx.de Cc: Chin Liang See clsee@opensource.altera.com Acked-by: Dinh Nguyen dinguyen@opensource.altera.com Cc: Pavel Machek pavel@denx.de Reviewed-by: Stefan Roese sr@denx.de Cc: Vince Bridgers vbridger@opensource.altera.com --- board/altera/socfpga/pll_config.h | 34 +++++++++++----------------------- 1 file changed, 11 insertions(+), 23 deletions(-)
diff --git a/board/altera/socfpga/pll_config.h b/board/altera/socfpga/pll_config.h index f0f59a9..8130fa4 100644 --- a/board/altera/socfpga/pll_config.h +++ b/board/altera/socfpga/pll_config.h @@ -16,9 +16,9 @@ #define CONFIG_HPS_MAINPLLGRP_MPUCLK_CNT (0) #define CONFIG_HPS_MAINPLLGRP_MAINCLK_CNT (0) #define CONFIG_HPS_MAINPLLGRP_DBGATCLK_CNT (0) -#define CONFIG_HPS_MAINPLLGRP_MAINQSPICLK_CNT (3) -#define CONFIG_HPS_MAINPLLGRP_MAINNANDSDMMCCLK_CNT (3) -#define CONFIG_HPS_MAINPLLGRP_CFGS2FUSER0CLK_CNT (12) +#define CONFIG_HPS_MAINPLLGRP_MAINQSPICLK_CNT (511) +#define CONFIG_HPS_MAINPLLGRP_MAINNANDSDMMCCLK_CNT (511) +#define CONFIG_HPS_MAINPLLGRP_CFGS2FUSER0CLK_CNT (15) #define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3MPCLK (1) #define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3SPCLK (1) #define CONFIG_HPS_MAINPLLGRP_MAINDIV_L4MPCLK (1) @@ -36,7 +36,7 @@
/* Peripheral PLL */ #define CONFIG_HPS_PERPLLGRP_VCO_DENOM (1) -#define CONFIG_HPS_PERPLLGRP_VCO_NUMER (79) +#define CONFIG_HPS_PERPLLGRP_VCO_NUMER (39) /* * To tell where is the VCOs source: * 0 = EOSC1 @@ -45,13 +45,13 @@ */ #define CONFIG_HPS_PERPLLGRP_VCO_PSRC (0) #define CONFIG_HPS_PERPLLGRP_EMAC0CLK_CNT (3) -#define CONFIG_HPS_PERPLLGRP_EMAC1CLK_CNT (3) -#define CONFIG_HPS_PERPLLGRP_PERQSPICLK_CNT (1) +#define CONFIG_HPS_PERPLLGRP_EMAC1CLK_CNT (511) +#define CONFIG_HPS_PERPLLGRP_PERQSPICLK_CNT (511) #define CONFIG_HPS_PERPLLGRP_PERNANDSDMMCCLK_CNT (4) #define CONFIG_HPS_PERPLLGRP_PERBASECLK_CNT (4) -#define CONFIG_HPS_PERPLLGRP_S2FUSER1CLK_CNT (9) +#define CONFIG_HPS_PERPLLGRP_S2FUSER1CLK_CNT (511) #define CONFIG_HPS_PERPLLGRP_DIV_USBCLK (0) -#define CONFIG_HPS_PERPLLGRP_DIV_SPIMCLK (0) +#define CONFIG_HPS_PERPLLGRP_DIV_SPIMCLK (4) #define CONFIG_HPS_PERPLLGRP_DIV_CAN0CLK (1) #define CONFIG_HPS_PERPLLGRP_DIV_CAN1CLK (1) #define CONFIG_HPS_PERPLLGRP_GPIODIV_GPIODBCLK (6249) @@ -66,15 +66,8 @@ #define CONFIG_HPS_PERPLLGRP_SRC_QSPI (1)
/* SDRAM PLL */ -#ifdef CONFIG_SOCFPGA_ARRIA5 -/* Arria V SDRAM will run at 533MHz while Cyclone V still at 400MHz - * This if..else... is not required if generated by tools */ #define CONFIG_HPS_SDRPLLGRP_VCO_DENOM (2) -#define CONFIG_HPS_SDRPLLGRP_VCO_NUMER (127) -#else -#define CONFIG_HPS_SDRPLLGRP_VCO_DENOM (0) -#define CONFIG_HPS_SDRPLLGRP_VCO_NUMER (31) -#endif /* CONFIG_SOCFPGA_ARRIA5 */ +#define CONFIG_HPS_SDRPLLGRP_VCO_NUMER (79)
/* * To tell where is the VCOs source: @@ -94,17 +87,12 @@
/* Info for driver */ #define CONFIG_HPS_CLK_OSC1_HZ (25000000) -#define CONFIG_HPS_CLK_OSC2_HZ 0 +#define CONFIG_HPS_CLK_OSC2_HZ (25000000) #define CONFIG_HPS_CLK_F2S_SDR_REF_HZ 0 #define CONFIG_HPS_CLK_F2S_PER_REF_HZ 0 #define CONFIG_HPS_CLK_MAINVCO_HZ (1600000000) #define CONFIG_HPS_CLK_PERVCO_HZ (1000000000) -#ifdef CONFIG_SOCFPGA_ARRIA5 -/* The if..else... is not required if generated by tools */ -#define CONFIG_HPS_CLK_SDRVCO_HZ (1066000000) -#else -#define CONFIG_HPS_CLK_SDRVCO_HZ (800000000) -#endif +#define CONFIG_HPS_CLK_SDRVCO_HZ (666666666) #define CONFIG_HPS_CLK_EMAC0_HZ (250000000) #define CONFIG_HPS_CLK_EMAC1_HZ (250000000) #define CONFIG_HPS_CLK_USBCLK_HZ (200000000)