On Thu, Aug 21, 2008 at 11:55:26PM +0000, Tsi-Chung Liew wrote:
@@ -96,7 +96,7 @@ int board_nand_init(struct nand_chip *nand) nand->ecc.mode = NAND_ECC_SOFT; nand->cmd_ctrl = nand_hwcontrol; nand->read_byte = nand_read_byte;
- nand->write_byte = nand_write_byte;
- nand->write_buf = nand_write_byte;
nand_write_byte() is not a suitable implementation for nand->write_buf.
diff --git a/board/freescale/m5373evb/nand.c b/board/freescale/m5373evb/nand.c index 404a9c3..bce8679 100644 --- a/board/freescale/m5373evb/nand.c +++ b/board/freescale/m5373evb/nand.c @@ -46,16 +46,14 @@ static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd, unsigned int ctrl)
if (ctrl & NAND_CTRL_CHANGE) { ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
IO_ADDR_W &= ~(SET_ALE | SE_CLE);
IO_ADDR_W &= ~(SET_ALE | SET_CLE);if (ctrl & NAND_CLE) IO_ADDR_W |= SET_CLE; if (ctrl & NAND_ALE) IO_ADDR_W |= SET_ALE;
at91_set_gpio_value(AT91_PIN_PD15, !(ctrl & NAND_NCE));- }
ACK this part.
-Scott