Hi Denk,
I use the current code from u-boot.git. But the result is the same : -------------------------------------------------------------------- U-Boot 1.1.4 (Aug 1 2006 - 07:40:21)
CPU: OMAP1611b at 96.0 MHz (DPLL1=96.0 MHz) Board: OSK5912 DRAM: 32 MB Flash: 32 MB In: serial Out: serial Err: serial Hit any key to stop autoboot: 0 OMAP5912 OSK # tftpboot 0x10000000 uImage Using MAC Address 00:00:00:11:22:33 TFTP from server 123.1.1.1; our IP address is 123.1.1.100 Filename 'uImage'. Load address: 0x10000000 Loading: ################################################################# ################################################################# ################################################################# ################################ done Bytes transferred = 1159854 (11b2ae hex) OMAP5912 OSK # imi
## Checking Image at 10000000 ... Image Name: 2.6.15 Image Type: ARM Linux Kernel Image (bzip2 compressed) Data Size: 1159790 Bytes = 1.1 MB Load Address: 10c08000 Entry Point: 10c08000 Verifying Checksum ... OK OMAP5912 OSK # run nfscmd_q ## Booting image at 10000000 ... Image Name: 2.6.15 Image Type: ARM Linux Kernel Image (bzip2 compressed) Data Size: 1159790 Bytes = 1.1 MB Load Address: 10c08000 Entry Point: 10c08000 Verifying Checksum ... OK Uncompressing Kernel Image ... data abort pc : [<1108fc88>] lr : [<000841a9>] sp : 10c3f948 ip : 00000056 fp : 000000bd r10: 0ae90c29 r9 : 10c3f94d r8 : 10c3ffdc r7 : 007c86b3 r6 : 00000056 r5 : 00037901 r4 : 00000001 r3 : 21dc2629 r2 : 10c6fcbd r1 : 000dbb8e r0 : 10c601a8 Flags: Nzcv IRQs off FIQs off Mode SVC_32 Resetting CPU ... --------------------------------------------------------------------
Any kindly response is appreciated ~
Best Regards, Clare ----- Original Message ----- From: "Wolfgang Denk" wd@denx.de To: "Clare Huang" cmhuang.eic93g@nctu.edu.tw Cc: u-boot-users@lists.sourceforge.net Sent: Wednesday, August 02, 2006 4:45 PM Subject: Re: [U-Boot-Users] U-boot 1.1.3 support Bzip2 compression?
In message 00bf01c6b60d$f644c550$c9010165@ClareHuang you wrote:
My platform is OMAP5912osk.
...
In /u-boot-1.1.3/include/configs/omap5912osk.h, if I use the original > config :
Please try using current code, i. e. top of git repository.
------=_NextPart_000_00BC_01C6B650.FE532AA0 Content-Type: text/html; charset="big5" Content-Transfer-Encoding: quoted-printable
And NEVER post HTML on this list!!
Best regards,
Wolfgang Denk