Re: [U-Boot] [PATCH v4 4/5] arm: socfpga: fix SPL booting from fpga OnChip RAM

On 08/15/2018 09:23 PM, Simon Goldschmidt wrote:

On Wed, Aug 15, 2018 at 10:57 AM Marek Vasut marex@denx.de wrote:

...

On 08/14/2018 10:26 PM, Simon Goldschmidt wrote:

...

On Tue, Aug 14, 2018 at 8:12 AM Simon Goldschmidt simon.k.r.goldschmidt@gmail.com wrote:

...

Marek Vasut marex@denx.de schrieb am Mo., 13. Aug. 2018, 22:36:

...

On 08/13/2018 09:34 PM, Simon Goldschmidt wrote:

...

To boot from fpga OnChip RAM, some changes are required in SPL to ensure the code is linked to the correct address (in contrast to QSPI and MMC boot, FPGA boot executes SPL in place instead of copying it to SRAM) and that fpga OnChip RAM stays accessible while SPL runs (don't disable fpga bridges).

This adds a new config option (CONFIG_SPL_SOCFPGA_BOOT_FROM_FPGA) for socfpga gen5 boards.

Signed-off-by: Simon Goldschmidt simon.k.r.goldschmidt@gmail.com

Changes in v4: Adapted to changed previous patch Changes in v3: this patch is new in v3 Changes in v2: None

arch/arm/mach-socfpga/Kconfig | 12 ++++++++++++ arch/arm/mach-socfpga/misc_gen5.c | 11 +++++++++-- arch/arm/mach-socfpga/spl_gen5.c | 6 ++++-- include/configs/socfpga_common.h | 5 +++++ 4 files changed, 30 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig index 5c1df2cf1f..a909395aac 100644 --- a/arch/arm/mach-socfpga/Kconfig +++ b/arch/arm/mach-socfpga/Kconfig @@ -132,3 +132,15 @@ config SYS_CONFIG_NAME default "socfpga_vining_fpga" if TARGET_SOCFPGA_SAMTEC_VINING_FPGA

endif

+if TARGET_SOCFPGA_GEN5

+config SPL_SOCFPGA_BOOT_FROM_FPGA

• bool "Allow booting SPL from FPGA OnChip RAM"
  

• default n
  

• help
  

•   Boot from FPGA: this changes the linker address for SPL code to run
  

•   from FPGA OnChip memory instead of SRAM and ensures FPGA OnChip RAM
  

•   stays accessible while SPL runs.
  

+endif diff --git a/arch/arm/mach-socfpga/misc_gen5.c b/arch/arm/mach-socfpga/misc_gen5.c index 429c3d6cd5..c82c3584dc 100644 --- a/arch/arm/mach-socfpga/misc_gen5.c +++ b/arch/arm/mach-socfpga/misc_gen5.c @@ -187,7 +187,13 @@ void socfpga_sdram_remap_zero(void) setbits_le32(&scu_regs->sacr, 0xfff);

  /* Configure the L2 controller to make SDRAM start at 0 */

• writel(0x1, &nic301_regs->remap);       /* remap.mpuzero */
  

• if (CONFIG_IS_ENABLED(SOCFPGA_BOOT_FROM_FPGA)) {
  

•         /* remap.mpuzero, keep fpga bridge enabled */
  

•         writel(0x9, &nic301_regs->remap);
  

• } else {
  

•         /* remap.mpuzero */
  

•         writel(0x1, &nic301_regs->remap);
  

• }
  writel(0x1, &pl310->pl310_addr_filter_start);
  

}

@@ -209,7 +215,8 @@ int arch_early_init_r(void) for (i = 0; i < 8; i++) /* Cache initial SW setting regs */ iswgrp_handoff[i] = readl(&sysmgr_regs->iswgrp_handoff[i]);

• socfpga_bridges_reset(1);
  

• if (!CONFIG_IS_ENABLED(SOCFPGA_BOOT_FROM_FPGA))
  

•         socfpga_bridges_reset(1);
  
  socfpga_sdram_remap_zero();
  
  

diff --git a/arch/arm/mach-socfpga/spl_gen5.c b/arch/arm/mach-socfpga/spl_gen5.c index be318cc0d9..0c7f6a8c84 100644 --- a/arch/arm/mach-socfpga/spl_gen5.c +++ b/arch/arm/mach-socfpga/spl_gen5.c @@ -93,7 +93,8 @@ void board_init_f(ulong dummy) /* Put everything into reset but L4WD0. */ socfpga_per_reset_all(); /* Put FPGA bridges into reset too. */

• socfpga_bridges_reset(1);
  

• if (!CONFIG_IS_ENABLED(SOCFPGA_BOOT_FROM_FPGA))
  

•         socfpga_bridges_reset(1);
  
  socfpga_per_reset(SOCFPGA_RESET(SDR), 0);
  socfpga_per_reset(SOCFPGA_RESET(UART0), 0);
  

@@ -163,5 +164,6 @@ void board_init_f(ulong dummy) hang(); }

• socfpga_bridges_reset(1);
  

• if (!CONFIG_IS_ENABLED(SOCFPGA_BOOT_FROM_FPGA))
  

•         socfpga_bridges_reset(1);
  

} diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index d1148b838b..99c5e39086 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -239,7 +239,12 @@ unsigned int cm_get_qspi_controller_clk_hz(void);

• 0xFFEz_zzzz ...... Malloc area (grows up to top)
• 0xFFE3_FFFF ...... End of SRAM (top)

*/ +#if CONFIG_SPL_SOCFPGA_BOOT_FROM_FPGA +/* SPL executed from FPGA */ +#define CONFIG_SPL_TEXT_BASE 0xC0000000 +#else #define CONFIG_SPL_TEXT_BASE CONFIG_SYS_INIT_RAM_ADDR +#endif #define CONFIG_SPL_MAX_SIZE CONFIG_SYS_INIT_RAM_SIZE

#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)

What about converting the SPL_TEXT_BASE to Kconfig , cfr my comment on the previous version of the patch ?

Revisiting that request again, it seems like I would touch tons of files in include/configs (and maybe tons of defconfigs). Is this really the right series to do so?

If you run moveconfig.py on it, does it seems like much work is left after moveconfig did it's job ? I'd like to prevent the ifdeffery.

...

Or did you think of a config option scoped to mach-socfpga only?

I'd like to see a generic one, since this is generic config option. Try adding the Kconfig entry, then run moveconfig and see if there's much to be done. Maybe it'll be easier than it looks at first.

I didn't want to say it's not easy. I wanted to say it produces a really big patch, as almost every board is affected. Which does not seem to fit into this series...

I agree the patch will be huge. And it'd be a nice cleanup. Would you mind postponing this booting from FPGA patch series for after the release ? I'd like to get the fixes for the standard booting paths into the release, but the next into the next one.

But I do have some problems: defconfigs for nds32 and sandbox are failing. I got sh and riscv working by editing ~/.buildman. Is this expected?

Possibly. Try running it through travis-ci to see what broke. No need to build everything locally.