Hello Stefan,
Am 12.04.2016 um 15:22 schrieb Stefan Roese:
Hi Heiko,
On 28.03.2016 09:33, Heiko Schocher wrote:
Am 23.03.2016 um 06:46 schrieb Stefan Roese:
This patch prepares the designware I2C driver for the DM conversion. This is mainly done by removing struct i2c_adapter from the functions that shall be used by the DM driver version as well.
Signed-off-by: Stefan Roese sr@denx.de Cc: Simon Glass sjg@chromium.org Reviewed-by: Bin Meng bmeng.cn@gmail.com Cc: Marek Vasut marex@denx.de Cc: Heiko Schocher hs@denx.de
v2:
Added Reviewed-by from Bin
drivers/i2c/designware_i2c.c | 173
++++++++++++++++++++++--------------------- 1 file changed, 90 insertions(+), 83 deletions(-)
I tried to apply this patch, but get the following error:
Wende an: i2c: designware_i2c: Prepare for DM driver conversion fatal: sha1 information is lacking or useless (drivers/i2c/designware_i2c.c). Dem Repository fehlen notwendige Blobs um auf einen 3-Wege-Merge zurückzufallen. Kann nicht zu 3-Wege-Merge zurückfallen. Anwendung des Patches fehlgeschlagen bei 0001 i2c: designware_i2c: Prepare for DM driver conversion
I tried the this patch on current mainline, with the following patches applied:
http://patchwork.ozlabs.org/patch/601112/ http://patchwork.ozlabs.org/patch/601128/ http://patchwork.ozlabs.org/patch/601117/
Could you take a look?
This should be fixed with v3 of this patch:
https://patchwork.ozlabs.org/patch/609406/
Could you give it another try please?
Yes, this patch applies now fine, but the patch:
[U-Boot,5/6,v2] i2c: designware_i2c: Add DM support http://patchwork.ozlabs.org/patch/601116/
fails now:
--2016-04-13 07:30:54-- http://patchwork.ozlabs.org/patch/601116/mbox Auflösen des Hostnamens »patchwork.ozlabs.org (patchwork.ozlabs.org)« … 103.22.144.67, 2401:3900:2:1::2 Verbindungsaufbau zu patchwork.ozlabs.org (patchwork.ozlabs.org)|103.22.144.67|:80 … verbunden. HTTP-Anforderung gesendet, auf Antwort wird gewartet … 301 MOVED PERMANENTLY Platz: http://patchwork.ozlabs.org/patch/601116/mbox/ [folgend] --2016-04-13 07:30:54-- http://patchwork.ozlabs.org/patch/601116/mbox/ Wiederverwendung der bestehenden Verbindung zu patchwork.ozlabs.org:80. HTTP-Anforderung gesendet, auf Antwort wird gewartet … 200 OK Länge: nicht spezifiziert [text/plain] Wird in »»mbox«« gespeichert.
mbox [ <=> ] 6,06K --.-KB/s in 0,004s
2016-04-13 07:30:54 (1,39 MB/s) - »mbox« gespeichert [6202]
total: 0 errors, 0 warnings, 0 checks, 181 lines checked
NOTE: Ignored message types: COMPLEX_MACRO CONSIDER_KSTRTO MINMAX MULTISTATEMENT_MACRO_USE_DO_WHILE NETWORKING_BLOCK_COMMENT_STYLE PREFER_ETHER_ADDR_COPY USLEEP_RANGE
mbox has no obvious style problems and is ready for submission. Wende an: i2c: designware_i2c: Add DM support fatal: sha1 information is lacking or useless (drivers/i2c/designware_i2c.c). Dem Repository fehlen notwendige Blobs um auf einen 3-Wege-Merge zurückzufallen. Kann nicht zu 3-Wege-Merge zurückfallen. Anwendung des Patches fehlgeschlagen bei 0001 i2c: designware_i2c: Add DM support Die Kopie des fehlgeschlagenen Patches befindet sich in: /home/hs/i2c/u-boot/.git/rebase-apply/patch Wenn Sie das Problem gelöst haben, führen Sie "git am --continue" aus. Falls Sie diesen Patch auslassen möchten, führen Sie stattdessen "git am --skip" aus. Um den ursprünglichen Branch wiederherzustellen und die Anwendung der Patches abzubrechen, führen Sie "git am --abort" aus. pollux:u-boot hs [master] $
Base is current mainline (with 2 i2c patches from Michal, but they should not interfere with your patches ...):
pollux:u-boot hs [master] $ git log --oneline 2ddd09a i2c: designware_i2c: Prepare for DM driver conversion f824253 i2c: designware_i2c: Integrate set_speed() into dw_i2c_set_bus_speed() 709a9e6 i2c: designware_i2c: Add dw_i2c_enable() helper function 1b89299 i2c: designware_i2c: Add ic_enable_status to ic_regs struct d4cc513 dm: i2c: Add driver for Cadence I2C IP be332ef i2c: Describe Cadence I2C devicetree bindings 39fbd98 Merge git://www.denx.de/git/u-boot-marvell
patches from you in the above list: - [U-Boot,1/6,v2] i2c: designware_i2c: Add ic_enable_status to ic_regs struct http://patchwork.ozlabs.org/patch/601112/ - [U-Boot,2/6,v3] i2c: designware_i2c: Add dw_i2c_enable() helper function http://patchwork.ozlabs.org/patch/601128/ - [U-Boot,3/6,v2] i2c: designware_i2c: Integrate set_speed() into dw_i2c_set_bus_speed() http://patchwork.ozlabs.org/patch/601117/ - [U-Boot,v3] i2c: designware_i2c: Prepare for DM driver conversion http://patchwork.ozlabs.org/patch/609406/
Did I missed an update patch?
bye, Heiko