Hi Tom,
I think this did not get applied yet?
-- Stefan
On 2016-12-22 22:51, Stefan Agner wrote:
From: Stefan Agner stefan.agner@toradex.com
This converts the following to Kconfig: CONFIG_SPL_RAM_DEVICE
Signed-off-by: Stefan Agner stefan.agner@toradex.com
Changes in v3: None Changes in v2: None
common/spl/Kconfig | 9 +++++++++ include/configs/microblaze-generic.h | 1 - include/configs/socfpga_common.h | 1 - include/configs/tegra-common.h | 1 - include/configs/xilinx_zynqmp.h | 1 - include/configs/zynq-common.h | 1 - 6 files changed, 9 insertions(+), 5 deletions(-)
diff --git a/common/spl/Kconfig b/common/spl/Kconfig index cba51f5df6..ea084f462b 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -449,6 +449,15 @@ config SPL_POWER_SUPPORT in drivers/power, drivers/power/pmic and drivers/power/regulator as part of an SPL build.
+config SPL_RAM_DEVICE
- bool "Support booting from preloaded image in RAM"
- depends on SPL
- default y if MICROBLAZE || ARCH_SOCFPGA || TEGRA || ARCH_ZYNQ
- help
Enable booting of an image already loaded in RAM. The image has tobe already in memory when SPL takes over, e.g. loaded by the bootROM.config SPL_SATA_SUPPORT bool "Support loading from SATA" depends on SPL diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 7abffdb2ef..cc90b73fa1 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -284,7 +284,6 @@
#define CONFIG_SPL_LDSCRIPT "arch/microblaze/cpu/u-boot-spl.lds"
-#define CONFIG_SPL_RAM_DEVICE #ifdef CONFIG_SYS_FLASH_BASE # define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_FLASH_BASE #endif diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index 58a6550844..7292469433 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -309,7 +309,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
- 0xFFFF_FF00 ...... End of SRAM
*/ #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_RAM_DEVICE #define CONFIG_SPL_TEXT_BASE CONFIG_SYS_INIT_RAM_ADDR #define CONFIG_SPL_MAX_SIZE (64 * 1024)
diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index 23a0e782e0..f30fec84a2 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -98,7 +98,6 @@
/* Defines for SPL */ #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_RAM_DEVICE #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_MAX_FOOTPRINT (CONFIG_SYS_TEXT_BASE - \ diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index fb4f6d6806..8845ff425d 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -260,7 +260,6 @@
#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_RAM_DEVICE
/* u-boot is like dtb */ #define CONFIG_SPL_FS_LOAD_ARGS_NAME "u-boot.bin" diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 953e7311a6..e04be5c18c 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -296,7 +296,6 @@ #define CONFIG_CMD_SPL #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_RAM_DEVICE
#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-zynq/u-boot-spl.lds"