From: Chao Fu B44548@freescale.com
Enable DSPI iomux for vf610twr board. Add the SPI configuration for vf610twr board.
Signed-off-by: Chao Fu b44548@freescale.com --- Change in v2 : New.
board/freescale/vf610twr/vf610twr.c | 15 ++++++++++++++- include/configs/vf610twr.h | 15 +++++++++++++++ 2 files changed, 29 insertions(+), 1 deletion(-)
diff --git a/board/freescale/vf610twr/vf610twr.c b/board/freescale/vf610twr/vf610twr.c index 699ea7f..ee6612f 100644 --- a/board/freescale/vf610twr/vf610twr.c +++ b/board/freescale/vf610twr/vf610twr.c @@ -278,6 +278,18 @@ static void setup_iomux_i2c(void) imx_iomux_v3_setup_multiple_pads(i2c0_pads, ARRAY_SIZE(i2c0_pads)); }
+static void setup_iomux_dspi(void) +{ + static const iomux_v3_cfg_t dspi0_pads[] = { + VF610_PAD_PTB19__DSPI0_CS0, + VF610_PAD_PTB20__DSPI0_SIN, + VF610_PAD_PTB21__DSPI0_SOUT, + VF610_PAD_PTB22__DSPI0_SCK, + }; + + imx_iomux_v3_setup_multiple_pads(dspi0_pads, ARRAY_SIZE(dspi0_pads)); +} + #ifdef CONFIG_FSL_ESDHC struct fsl_esdhc_cfg esdhc_cfg[1] = { {ESDHC1_BASE_ADDR}, @@ -315,7 +327,7 @@ static void clock_init(void) struct anadig_reg *anadig = (struct anadig_reg *)ANADIG_BASE_ADDR;
clrsetbits_le32(&ccm->ccgr0, CCM_REG_CTRL_MASK, - CCM_CCGR0_UART1_CTRL_MASK); + CCM_CCGR0_UART1_CTRL_MASK | CCM_CCGR0_DSPI0_CTRL_MASK); clrsetbits_le32(&ccm->ccgr1, CCM_REG_CTRL_MASK, CCM_CCGR1_PIT_CTRL_MASK | CCM_CCGR1_WDOGA5_CTRL_MASK); clrsetbits_le32(&ccm->ccgr2, CCM_REG_CTRL_MASK, @@ -386,6 +398,7 @@ int board_early_init_f(void) setup_iomux_uart(); setup_iomux_enet(); setup_iomux_i2c(); + setup_iomux_dspi();
return 0; } diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h index 8d0a00d..73f96e7 100644 --- a/include/configs/vf610twr.h +++ b/include/configs/vf610twr.h @@ -74,6 +74,21 @@ #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_SPD_BUS_NUM 0
+/* DSPI Configs */ +#define CONFIG_CMD_SPI +#define CONFIG_CMD_SF +#define CONFIG_FSL_DSPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_ATMEL +#define MMAP_DSPI SPI0_BASE_ADDR +#define CONFIG_SYS_DSPI_CTAR0 (DSPI_CTAR_TRSZ(7) | \ + DSPI_CTAR_PCSSCK_1CLK | \ + DSPI_CTAR_PASC(0) | \ + DSPI_CTAR_PDT(0) | \ + DSPI_CTAR_CSSCK(0) | \ + DSPI_CTAR_ASC(0) | \ + DSPI_CTAR_DT(0)) + #define CONFIG_BOOTDELAY 3
#define CONFIG_LOADADDR 0x82000000