The series was born from the need to manage the PWM backlight of the display connected to my beaglebone board. To hit the target, I had to develop drivers for PWM management which in turn relied on drivers for managing timers and clocks, all developed according to the driver model. My intention was to use the SoC-specific API only at strictly necessary points in the code. My previous patches for migrating the AM335x display driver to the driver model had required the implementation of additional functions outside the concerns of the driver, (settings for dividing the pixel clock rate, configuring the display DPLL rate, ....) not being able to use the API of the related clock drivers. This series shouldn't have repeated the same kind of mistake. Furthermore, I also wanted to fix that kind of forced choice. Almost everything should have been accessible via the driver model API. In the series there are also some patches that could be submitted separately, but which I have however inserted to avoid applying future patches to incorporate them. With this last consideration, I hope I have convincingly justified the large number of patches in the series.
The patch enabling address translation into a CPU physical address from device-tree even in case of crossing levels with #size-cells = <0>, is crucial for the series. The previous implementation was unable to perform the address translation required by the am33xx device tree. I tried to apply in a conservative way as few changes as possible and to verify the execution of all the tests already developed, as well as the new ones I added for the new feature.
The patch series can be cleanly applied to the HEAD of the master which at the time of release points to c15f44acf9 commit.
Changes in v7: - Not all OMAP2 platform need CONFIG_TI_SYSC. Set CONFIG_TI_SYSC as imply and disable it to fix building errors in: nokia_rx51_defconfig cm_t335_defconfig - Add gd_size_cells_0 macro to fix building errors for boards that do not use CONFIG_DM. - Add dm8168-evm-u-boot.dtsi to fix building errors for ti816x_evm_defconfig. - Add linux/err.h header in am335x-fb.c to fix building errors for brxre1_defconfig. - Fix building errors for: brppt1_mmc_defconfig brppt1_nand_defconfig brppt1_spi_defconfig brxre1_defconfig brsmarc1_defconfig
Changes in v6: - Remove the 'am3-prcm' driver. - Add the 'simple-bus' compatible string to the prcm_clocks node. - Remove the 'am3-scm' driver. - Add the 'simple-bus' compatible string to the scm_clocks node.
Changes in v5: - Create drivers/clk/ti directory. - Move the clk-ti-mux.c file to drivers/clk/ti and rename it clk-mux.c - Move the clk-ti-am3-dpll.c file to drivers/clk/ti with the name clk-am3-dpll.c. - Move the clk-ti-am3-dpll-x2.c file to drivers/clk/ti with the name clk-am3-dpll-x2.c. - Move the clk-ti.c file to drivers/clk/ti with the name clk.c. - Move the clk-ti.h file to drivers/clk/ti with the name clk.h. - Move the clk-ti-divider.c file to drivers/clk/ti with the name clk-divider.c. - Move the clk-ti-gate.c file to drivers/clk/ti with the name clk-gate.c. - Move the clk-ti-ctrl.c file to drivers/clk/ti with the name clk-ctrl.c.
Changes in v4: - Include device_compat.h header for dev_xxx macros. - Remove a blank line at end of file arch/arm/dts/am33xx-l4.dtsi. - Update clk_round_rate description. - Add Sean Anderson review. - Include device_compat.h header for dev_xxx macros. - Include device_compat.h header for dev_xxx macros. - Fix compilation errors on the dev parameter of the dev_xx macros. - Include device_compat.h header for dev_xxx macros. - Fix compilation errors on the dev parameter of the dev_xx macros. - Include device_compat.h header for dev_xxx macros. - Include device_compat.h header for dev_xxx macros. - Fix compilation errors on the dev parameter of the dev_xx macros. - Include device_compat.h header for dev_xxx macros. - Add Sphinx documentation for dm_flags. - Convert GD_DM_FLG_* to enum. - Include device_compat.h header in test/dm/test-fdt.c for dev_xxx macros. - Include device_compat.h header for dev_xxx macros. - Include device_compat.h header for dev_xxx macros. - Include device_compat.h header for dev_xxx macros. - Add Simon Glass review. - Include device_compat.h header for dev_xxx macros.
Changes in v3: - Remove doc/device-tree-bindings/clock/clock-bindings.txt. - Remove doc/device-tree-bindings/clock/ti,mux.txt. - Add to commit message the references to linux kernel dt binding documentation. - Remove doc/device-tree-bindings/clock/ti,dpll.txt. - Add to commit message the references to linux kernel dt binding documentation. - Remove doc/device-tree-bindings/clock/ti,autoidle.txt. - Remove doc/device-tree-bindings/clock/ti,divider.txt. - Add to commit message the references to linux kernel dt binding documentation. - Remove doc/device-tree-bindings/clock/gpio-gate-clock.txt. - Remove doc/device-tree-bindings/clock/ti,clockdomain.txt. - Remove doc/device-tree-bindings/clock/ti,gate.txt. - Add to commit message the references to linux kernel dt binding documentation. - Fix access to registers listed by device tree following resync of am33xx-clock.dtsi with Linux 5.9-rc7. - Remove doc/device-tree-bindings/clock/ti,clkctrl.txt. - Add to commit message the references to linux kernel dt binding documentation. - doc/device-tree-bindings/arm/omap,prcm.txt. - Add to commit message the references to linux kernel dt binding documentation. - Add to commit message the references to linux kernel dt binding documentation. - Comment dm_flags field in the global_data structure. - Remove doc/device-tree-bindings/arm/omap,ctrl.txt. - Remove doc/device-tree-bindings/pinctrl/pinctrl-single.txt. - Add to commit message the references to linux kernel dt binding documentation. - Adds PWM_TI_EHRPWM dependency on ARCH_OMAP2PLUS in Kconfig. - Add error message in case of invalid address. - Remove doc/device-tree-bindings/pwm/ti,ehrpwm.txt. - Add to commit message the references to linux kernel dt binding documentation. - Move Kconfig symbol from drivers/pwm to drivers/bus. - Remove the domain clock reference from the pwmss nodes of the device tree in am33xx.dtsi. The resync of am33xx.dtsi with Linux 5.9-rc7 already contains such references. - Remove domain clock enabling/disabling. Enabling the domain clock is performed by the sysc interconnect target module driver during the pwm device probing. - Remove doc/device-tree-bindings/pwm/ti,pwmss.txt. - Add to commit message the references to linux kernel dt binding documentation. - Update the DTS lcdc node of the am335x boards because of the am33xx.dtsi resynced with Linux 5.9-rc7. - Remove clock domain enabling/disabling. - Update the commit message. - Add clk.h header. - Fix an error code returned by the probe function.
Changes in v2: - Add the clk_ prefix to the divider functions. - Add kernel-doc comments to the exported functions. - Merged to patch [09/31] clk: ti: refactor mux and divider clock drivers. - Remove the 'ti_am3_prcm_clocks' driver. Handle 'prcm_clocks' node in the 'ti_am3_prcm' driver. - Update the commit message. - Fix a missing line in the commit message. - Add dm_flags to global_data structure and GD_DM_FLG_SIZE_CELLS_0 macro to test without recompiling. - Update the OF_CHECK_COUNTS macro in order to have just one #define by bringing the GD_DM_FLG_SIZE_CELLS_0 into the expression. - Lower-case the 0xC019 hex number. - Remove the 'ti_am3_scm_clocks' driver. Handle 'scm_clocks' node in the 'ti_am3_scm' driver. - Update the commit message.
Dario Binacchi (28): clk: export generic routines dt-bindings: bus: ti-sysc: resync with Linux 5.9-rc7 bus: ti: add minimal sysc interconnect target driver arm: dts: sync am33xx with Linux 5.9-rc7 clk: add clk_round_rate() clk: ti: add mux clock driver arm: ti: am33xx: add DPLL_EN_FAST_RELOCK_BYPASS macro clk: ti: am33xx: add DPLL clock drivers clk: ti: add divider clock driver clk: ti: add gate clock driver arm: dts: am335x: include am33xx-u-boot.dtsi ti: am33xx: fix do_enable_clocks() to accept NULL parameters clk: ti: add support for clkctrl clocks clk: ti: omap4: add clock manager driver arm: dts: am335x: enable prcm_clocks auto binding clk: move clk-ti-sci driver to 'ti' directory fdt: translate address if #size-cells = <0> omap: timer: fix the rate setting arm: dts: am335x: enable scm_clocks auto binding pwm: ti: am33xx: add enhanced pwm driver bus: ti: am33xx: add pwm subsystem driver dm: core: add a function to decode display timings video: omap: add panel driver video: omap: drop domain clock enabling by SOC api video: omap: set LCD clock rate through DM API video: omap: split the legacy code from the DM code video: omap: move drivers to 'ti' directory board: ti: am335x-ice: get CDCE913 clock device
arch/arm/Kconfig | 1 + arch/arm/dts/am335x-brppt1-mmc.dts | 17 +- arch/arm/dts/am335x-brppt1-nand.dts | 17 +- arch/arm/dts/am335x-brppt1-spi.dts | 17 +- arch/arm/dts/am335x-brsmarc1.dts | 20 +- arch/arm/dts/am335x-brxre1.dts | 21 +- arch/arm/dts/am335x-chiliboard-u-boot.dtsi | 2 + arch/arm/dts/am335x-draco.dtsi | 11 +- arch/arm/dts/am335x-evm-u-boot.dtsi | 17 +- arch/arm/dts/am335x-evm.dts | 2 +- arch/arm/dts/am335x-evmsk-u-boot.dtsi | 16 +- arch/arm/dts/am335x-evmsk.dts | 2 +- arch/arm/dts/am335x-guardian-u-boot.dtsi | 25 +- arch/arm/dts/am335x-icev2-u-boot.dtsi | 3 + arch/arm/dts/am335x-pdu001-u-boot.dtsi | 20 +- arch/arm/dts/am335x-pxm2.dtsi | 2 +- arch/arm/dts/am335x-pxm50-u-boot.dtsi | 16 +- arch/arm/dts/am335x-regor-rdk-u-boot.dtsi | 2 + arch/arm/dts/am335x-rut-u-boot.dtsi | 16 +- arch/arm/dts/am335x-rut.dts | 2 +- arch/arm/dts/am335x-shc-u-boot.dtsi | 2 + arch/arm/dts/am335x-shc.dts | 2 +- arch/arm/dts/am335x-wega-rdk-u-boot.dtsi | 2 + arch/arm/dts/am33xx-clocks.dtsi | 106 +- arch/arm/dts/am33xx-l4.dtsi | 1962 ++++++++++++++++++++ arch/arm/dts/am33xx-u-boot.dtsi | 8 + arch/arm/dts/am33xx.dtsi | 721 +++---- arch/arm/dts/da850-evm-u-boot.dtsi | 18 +- arch/arm/dts/dm8168-evm-u-boot.dtsi | 12 + arch/arm/include/asm/arch-am33xx/clock.h | 1 + arch/arm/mach-omap2/am33xx/clock.c | 10 +- arch/arm/mach-omap2/am33xx/clock_am33xx.c | 2 +- arch/sandbox/dts/test.dts | 67 + arch/sandbox/include/asm/clk.h | 9 + board/BuR/common/bur_common.h | 2 +- board/BuR/common/common.c | 2 +- board/ti/am335x/board.c | 2 +- board/ti/am43xx/board.c | 2 +- common/fdt_support.c | 6 +- configs/cm_t335_defconfig | 1 + configs/nokia_rx51_defconfig | 1 + drivers/bus/Kconfig | 13 + drivers/bus/Makefile | 2 + drivers/bus/ti-pwmss.c | 21 + drivers/bus/ti-sysc.c | 166 ++ drivers/clk/Kconfig | 9 +- drivers/clk/Makefile | 2 +- drivers/clk/clk-divider.c | 24 +- drivers/clk/clk-uclass.c | 15 + drivers/clk/clk_sandbox.c | 17 + drivers/clk/clk_sandbox_test.c | 10 + drivers/clk/ti/Kconfig | 43 + drivers/clk/ti/Makefile | 13 + drivers/clk/ti/clk-am3-dpll-x2.c | 79 + drivers/clk/ti/clk-am3-dpll.c | 268 +++ drivers/clk/ti/clk-ctrl.c | 154 ++ drivers/clk/ti/clk-divider.c | 381 ++++ drivers/clk/ti/clk-gate.c | 93 + drivers/clk/ti/clk-mux.c | 253 +++ drivers/clk/{clk-ti-sci.c => ti/clk-sci.c} | 0 drivers/clk/ti/clk.c | 34 + drivers/clk/ti/clk.h | 13 + drivers/clk/ti/omap4-cm.c | 22 + drivers/core/Kconfig | 12 + drivers/core/fdtaddr.c | 2 +- drivers/core/of_addr.c | 13 +- drivers/core/ofnode.c | 7 +- drivers/core/read.c | 6 + drivers/core/root.c | 3 + drivers/pwm/Kconfig | 7 + drivers/pwm/Makefile | 1 + drivers/pwm/pwm-ti-ehrpwm.c | 468 +++++ drivers/timer/omap-timer.c | 6 +- drivers/video/Kconfig | 5 +- drivers/video/Makefile | 2 +- drivers/video/ti/Kconfig | 8 + drivers/video/ti/Makefile | 10 + drivers/video/{ => ti}/am335x-fb.c | 341 +--- drivers/video/{ => ti}/am335x-fb.h | 4 - drivers/video/ti/tilcdc-panel.c | 172 ++ drivers/video/ti/tilcdc-panel.h | 14 + drivers/video/ti/tilcdc.c | 425 +++++ drivers/video/ti/tilcdc.h | 38 + include/asm-generic/global_data.h | 24 + include/clk-uclass.h | 8 + include/clk.h | 28 + include/dm/read.h | 24 + include/dt-bindings/bus/ti-sysc.h | 6 + include/linux/clk-provider.h | 57 + test/dm/clk.c | 22 + test/dm/test-fdt.c | 149 +- 91 files changed, 5691 insertions(+), 970 deletions(-) create mode 100644 arch/arm/dts/am33xx-l4.dtsi create mode 100644 arch/arm/dts/dm8168-evm-u-boot.dtsi create mode 100644 drivers/bus/ti-pwmss.c create mode 100644 drivers/bus/ti-sysc.c create mode 100644 drivers/clk/ti/Kconfig create mode 100644 drivers/clk/ti/Makefile create mode 100644 drivers/clk/ti/clk-am3-dpll-x2.c create mode 100644 drivers/clk/ti/clk-am3-dpll.c create mode 100644 drivers/clk/ti/clk-ctrl.c create mode 100644 drivers/clk/ti/clk-divider.c create mode 100644 drivers/clk/ti/clk-gate.c create mode 100644 drivers/clk/ti/clk-mux.c rename drivers/clk/{clk-ti-sci.c => ti/clk-sci.c} (100%) create mode 100644 drivers/clk/ti/clk.c create mode 100644 drivers/clk/ti/clk.h create mode 100644 drivers/clk/ti/omap4-cm.c create mode 100644 drivers/pwm/pwm-ti-ehrpwm.c create mode 100644 drivers/video/ti/Kconfig create mode 100644 drivers/video/ti/Makefile rename drivers/video/{ => ti}/am335x-fb.c (54%) rename drivers/video/{ => ti}/am335x-fb.h (97%) create mode 100644 drivers/video/ti/tilcdc-panel.c create mode 100644 drivers/video/ti/tilcdc-panel.h create mode 100644 drivers/video/ti/tilcdc.c create mode 100644 drivers/video/ti/tilcdc.h