Currently, console=ttyS0 is hard-coded in CONFIG_EXTRA_ENV_SETTINGS and it replaces the bootargs in the chosen node of the device tree passed to the kernel. This is not preferable because I am going to add some boards whose console is not ttyS0.
Drop bootargs settings from U-Boot's environment and use the one in device tree by default.
Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com ---
include/configs/uniphier.h | 22 ++++++---------------- 1 file changed, 6 insertions(+), 16 deletions(-)
diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index bd0769e..f44c58b 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -224,22 +224,17 @@ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \ "tftpboot; bootm;"
-#define CONFIG_BOOTARGS " earlyprintk loglevel=8" - #ifdef CONFIG_FIT #define CONFIG_BOOTFILE "fitImage" #define LINUXBOOT_ENV_SETTINGS \ "fit_addr=0x00100000\0" \ "fit_addr_r=0x84100000\0" \ "fit_size=0x00f00000\0" \ - "norboot=run add_default_bootargs &&" \ - "setexpr fit_addr $nor_base + $fit_addr &&" \ + "norboot=setexpr fit_addr $nor_base + $fit_addr &&" \ "bootm $fit_addr\0" \ - "nandboot=run add_default_bootargs &&" \ - "nand read $fit_addr_r $fit_addr $fit_size &&" \ + "nandboot=nand read $fit_addr_r $fit_addr $fit_size &&" \ "bootm $fit_addr_r\0" \ - "tftpboot=run add_default_bootargs &&" \ - "tftpboot $fit_addr_r $bootfile &&" \ + "tftpboot=tftpboot $fit_addr_r $bootfile &&" \ "bootm $fit_addr_r\0" #else #define CONFIG_BOOTFILE "uImage" @@ -255,18 +250,15 @@ "ramdisk_addr_r=0x84a00000\0" \ "ramdisk_size=0x00600000\0" \ "ramdisk_file=rootfs.cpio.uboot\0" \ - "norboot=run add_default_bootargs &&" \ - "setexpr kernel_addr $nor_base + $kernel_addr &&" \ + "norboot=setexpr kernel_addr $nor_base + $kernel_addr &&" \ "setexpr ramdisk_addr $nor_base + $ramdisk_addr &&" \ "setexpr fdt_addr $nor_base + $fdt_addr &&" \ "bootm $kernel_addr $ramdisk_addr $fdt_addr\0" \ - "nandboot=run add_default_bootargs &&" \ - "nand read $kernel_addr_r $kernel_addr $kernel_size &&" \ + "nandboot=nand read $kernel_addr_r $kernel_addr $kernel_size &&" \ "nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \ "nand read $fdt_addr_r $fdt_addr $fdt_size &&" \ "bootm $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \ - "tftpboot=run add_default_bootargs &&" \ - "tftpboot $kernel_addr_r $bootfile &&" \ + "tftpboot=tftpboot $kernel_addr_r $bootfile &&" \ "tftpboot $ramdisk_addr_r $ramdisk_file &&" \ "tftpboot $fdt_addr_r $fdt_file &&" \ "bootm $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" @@ -281,8 +273,6 @@ "nand write $loadaddr 0 0x00010000 &&" \ "tftpboot u-boot-dtb.img &&" \ "nand write $loadaddr 0x00010000 0x000f0000\0" \ - "add_default_bootargs=setenv bootargs $bootargs" \ - " console=ttyS0,$baudrate\0" \ LINUXBOOT_ENV_SETTINGS
/* Open Firmware flat tree */