On 01/10/2017 05:31 PM, york sun wrote:
On 01/10/2017 05:02 AM, Alexander Graf wrote:
On 01/10/2017 01:58 PM, Michal Simek wrote:
U-Boot configured via DTB can use the same DTB for booting the kernel. When OF_CONTROL is used fdtcontroladdr is setup and can be use for boot.
Signed-off-by: Michal Simek michal.simek@xilinx.com
Didn't check if there is any side effect or not but it looks weird when you have DT driver u-boot that you have to load dtb again.
I agree, and I think it's very reasonable to try and use the same device tree for U-Boot and Linux.
Size is a concern. U-Boot only uses a small portion of the device tree. If the complete device tree is embedded into U-Boot, the size increases quite a bit.
Is size really a concern? At the end of the day we only care about the full dt for non-SPL U-Boot which is reasonably big anyway. And if it's a real problem, we can always compress.
Alex