On Wed, May 23, 2007 at 02:59:11PM +0200, Ulf Samuelsson wrote:
Instead of wasting your time with the mainstream u-boot for the AT91, you could try out my patched u-boot-1.2.0-atmel at ftp://at91supp:support@81.80.104.162/ -> AT91 Third Party -> Linux_Host -> Source
To be honest, mainstream u-boot works pretty well for me. I'm even using it on board without NOR flash (only serial and NAND) :-) It is just not as nice and featurefull as it could be.
I have a working dataflash support for most Atmel chips there (board = at91rm9200df). It also gets automatically built by the "buildroot" at the same location.
I'm prefering PTXdist which is building toolchain, rootfs and u-boot as well and is not uClibc centric...
If you have any suggestions/patches, then I would be happy to add that.
I'll look at your patches and try to split them to smaller chunks... Lets see if that's posible.
Best regards, ladis