Hi Peng, Em qua, 16 de jan de 2019 às 23:48, Peng Fan peng.fan@nxp.com escreveu:
-----Original Message----- From: Breno Matheus Lima [mailto:brenomatheus@gmail.com] Sent: 2019年1月17日 9:42 To: Peng Fan peng.fan@nxp.com Cc: Breno Matheus Lima breno.lima@nxp.com; Fabio Estevam festevam@gmail.com; Fabio Estevam fabio.estevam@nxp.com; U-Boot-Denx u-boot@lists.denx.de Subject: Re: Problems to boot i.MX8QXP EVK board
Hi Peng,
Em qua, 16 de jan de 2019 às 23:33, Peng Fan peng.fan@nxp.com escreveu:
Hi Breno,
-----Original Message----- From: Breno Matheus Lima [mailto:brenomatheus@gmail.com] Sent: 2019年1月17日 9:04 To: Peng Fan peng.fan@nxp.com; Breno Matheus Lima breno.lima@nxp.com Cc: Fabio Estevam festevam@gmail.com; Fabio Estevam fabio.estevam@nxp.com; U-Boot-Denx u-boot@lists.denx.de Subject: Problems to boot i.MX8QXP EVK board
Hi Peng,
I'm not being able to boot U-Boot v2019.01 on my i.MX8QXP B0 MEK board by following README file
(board/freescale/imx8qxp_mek/README).
After reverting commit f7e475db4011("tools: imx8image: set dcd_skip to true") everything seems to be working fine.
Are you using A0 or B0 chip? A0 chip is no being supported anymore.
I'm using i.MX8QXP B0:
Could you give a try using 4.14.78 GA release scfw/seco/atf + upstream uboot?
There might be some change in scfw.
Hi Peng,
I'm using the following versions:
- U-Boot upstream v2019.01 - ATF from NXP codeaurora (rel_imx_4.14.78_1.0.0_ga) - SCFW binary from imx-sc-firmware-1.1 package - SECO FW from firmware-imx-8.0 package
The same issue still happening, I can only boot my board after reverting commit f7e475db4011("tools: imx8image: set dcd_skip to true").
As you can see in log below, SCFW top is 65afe5f6:
U-Boot 2019.01-00001-g2df3ad4767 (Jan 17 2019 - 08:15:39 -0200)
CPU: NXP i.MX8QXP RevB A35 at 147228 MHz
Model: Freescale i.MX8QXP MEK Board: iMX8QXP MEK Build: SCFW 65afe5f6 Boot: SD1 DRAM: 3 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... *** Warning - bad CRC, using default environment
In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 Net: eth-1: ethernet@5b040000 Hit any key to stop autoboot: 0 =>
Thanks, Breno Lima